| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- replace power_supply_register_no_ws() with power_supply_register()
and a new "no_wakeup_source" field in struct power_supply_config
- constify battery info tables in the core and all drivers
- switch back to remove callback for all platform drivers
- allow power_supply_put() to be called from atomic context
- mark attribute arrays read-only after init
Power-supply drivers:
- new driver for TWL6030 and TWL6032
- rk817: improve battery capacity calibration
- misc small cleanups and fixes"
* tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits)
power: reset: ep93xx: add AUXILIARY_BUS dependency
dt-bindings: power: reset: Convert mode-.* properties to array
power: supply: sc27xx: Fix battery detect GPIO probe
dt-bindings: power: supply: sc27xx-fg: document deprecated bat-detect-gpio
reset: keystone-reset: remove unused macros
power: supply: axp20x_battery: Use scaled iio_read_channel
power: supply: axp20x_usb_power: Use scaled iio_read_channel
power: supply: generic-adc-battery: change my gmail
power: supply: pmu_battery: Set power supply type to BATTERY
power: Switch back to struct platform_driver::remove()
power: supply: hwmon: move interface to private header
power: supply: rk817: Update battery capacity calibration
power: supply: rk817: stop updating info in suspend
power: supply: rt9471: Use IC status regfield to report real charger status
power: supply: rt9471: Fix wrong WDT function regfield declaration
dt-bindings: power/supply: qcom,pmi8998-charger: Drop incorrect "#interrupt-cells" from example
power: supply: core: mark attribute arrays as ro_after_init
power: supply: core: unexport power_supply_property_is_writeable()
power: supply: core: use device mutex wrappers
power: supply: bq27xxx: Fix registers of bq27426
...
|
|
https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
- additional checks to address issues identified by syzbot
- continuation of the transition from 'page' to 'folio'
* tag 'ntfs3_for_6.13' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Accumulated refactoring changes
fs/ntfs3: Switch to folio to release resources
fs/ntfs3: Add check in ntfs_extend_initialized_size
fs/ntfs3: Add more checks in mi_enum_attr (part 2)
fs/ntfs3: Equivalent transition from page to folio
fs/ntfs3: Fix case when unmarked clusters intersect with zone
fs/ntfs3: Fix warning in ni_fiemap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- If the start cluster of stream entry is invalid, treat it as the
empty directory
- Valid size of steam entry cannot be greater than data size. If
valid_size is invalid, use data_size
- Move Direct-IO alignment check to before extending the valid size
- Fix uninit-value issue reported by syzbot
- Optimize finding directory entry-set in write_inode, rename, unlink
* tag 'exfat-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: reduce FAT chain traversal
exfat: code cleanup for exfat_readdir()
exfat: remove argument 'p_dir' from exfat_add_entry()
exfat: move exfat_chain_set() out of __exfat_resolve_path()
exfat: add exfat_get_dentry_set_by_ei() helper
exfat: rename argument name for exfat_move_file and exfat_rename_file
exfat: remove unnecessary read entry in __exfat_rename()
exfat: fix file being changed by unaligned direct write
exfat: fix uninit-value in __exfat_get_dentry_set
exfat: fix out-of-bounds access of directory entries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add a common init function for arch-specific ACPI
initialization, clean up idle states initialization in the ACPI
processor_idle driver and update quirks:
- Introduce acpi_arch_init() for architecture-specific ACPI subsystem
initialization (Miao Wang)
- Clean up Asus quirks in acpi_quirk_skip_dmi_ids[] and add a quirk
to skip I2C clients on Acer Iconia One 8 A1-840 (Hans de Goede)
- Make the ACPI processor_idle driver use acpi_idle_play_dead() for
all idle states regardless of their types (Rafael Wysocki)"
* tag 'acpi-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: introduce acpi_arch_init()
ACPI: x86: Clean up Asus entries in acpi_quirk_skip_dmi_ids[]
ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 8 A1-840
ACPI: processor_idle: Use acpi_idle_play_dead() for all C-states
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull morepower management updates from Rafael Wysocki:
"These update the OPP (Operating Performance Points) DT bindings for
ti-cpu (Dhruva Gole) and remove unused declarations from the OPP
header file (Zhang Zekun)"
* tag 'pm-6.13-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
dt-bindings: opp: operating-points-v2-ti-cpu: Describe opp-supported-hw
OPP: Remove unused declarations in header file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These fix a Power Allocator thermal governor issue reported recently,
update the Intel int3400 thermal driver and simplify DT data parsing
in the thermal control subsystem:
- Add a NULL pointer check that was missed by recent modifications of
the Power Allocator thermal governor (Rafael Wysocki)
- Remove the data_vault attribute_group from int3400 because it is
only used for exposing one binary file that can be exposed directly
(Thomas Weißschuh)
- Prevent the current_uuid sysfs attribute in int3400 from mistakenly
treating valid UUID values as invalid on some older systems
(Srinivas Pandruvada)
- Use the cleanup.h mechanics to simplify DT data parsing in the
thermal core and some drivers (Krzysztof Kozlowski)"
* tag 'thermal-6.13-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: sun8i: Use scoped device node handling to simplify error paths
thermal: tegra: Simplify with scoped for each OF child loop
thermal: qcom-spmi-adc-tm5: Simplify with scoped for each OF child loop
thermal: of: Use scoped device node handling to simplify of_thermal_zone_find()
thermal: of: Use scoped memory and OF handling to simplify thermal_of_trips_init()
thermal: of: Simplify thermal_of_should_bind with scoped for each OF child
thermal: gov_power_allocator: Add missing NULL pointer check
thermal: int3400: Remove unneeded data_vault attribute_group
thermal: int3400: Fix reading of current_uuid for active policy
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull more iommufd updates from Jason Gunthorpe:
"Change the driver callback op domain_alloc_user() into two ops:
domain_alloc_paging_flags() and domain_alloc_nesting() that better
describe what the ops are expected to do.
There will be per-driver cleanup based on this going into the next
cycle via the driver trees"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu: Rename ops->domain_alloc_user() to domain_alloc_paging_flags()
iommu: Add ops->domain_alloc_nested()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- structure optimization of few bus structures and header updates
- support for 2.0 disco spec
- amd driver updates for acp revision, refactoring code and support for
acp6.3
- soft reset support for cadence driver
* tag 'soundwire-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (24 commits)
soundwire: Minor formatting fixups in sdw.h header
soundwire: Update the includes on the sdw.h header
soundwire: cadence: clear MCP BLOCK_WAKEUP in init
soundwire: cadence: add soft-reset on startup
soundwire: intel_auxdevice: add kernel parameter for mclk divider
soundwire: mipi-disco: add support for DP0/DPn 'lane-list' property
soundwire: mipi-disco: add new properties from 2.0 spec
soundwire: mipi-disco: add comment on DP0-supported property
soundwire: mipi-disco: add support for peripheral channelprepare timeout
soundwire: mipi_disco: add support for clock-scales property
soundwire: mipi-disco: add error handling for property array read
soundwire: mipi-disco: remove DPn audio-modes
soundwire: optimize sdw_dpn_prop
soundwire: optimize sdw_dp0_prop
soundwire: optimize sdw_slave_prop
soundwire: optimize sdw_bus structure
soundwire: optimize sdw_master_prop
soundwire: optimize sdw_stream_runtime memory layout
soundwire: mipi_disco: add MIPI-specific property_read_bool() helpers
soundwire: Correct some typos in comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New hardware support:
- ST STM32MP25 combophy support
- Sparx5 support for lan969x serdes and updates to driver to support
this
- NXP PTN3222 eUSB2 to USB2 redriver
- Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2
support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP
UFS PHY support and SA8775P eDP PHY support
- Rockchip rk3576 usbdp and rk3576 usb2 phy support
- Binding for Microchip ATA6561 can phy
Updates:
- Freescale driver updates from hdmi support
- Conversion of rockchip rk3228 hdmi phy binding to yaml
- Broadcom usb2-phy deprecated support dropped and USB init array
update for BCM4908
- TI USXGMII mode support in J7200
- Switch back to platform_driver::remove() subsystem update"
* tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits)
phy: qcom: qmp: Fix lecacy-legacy typo
phy: lan969x-serdes: add support for lan969x serdes driver
dt-bindings: phy: sparx5: document lan969x
phy: sparx5-serdes: add support for branching on chip type
phy: sparx5-serdes: add indirection layer to register macros
phy: sparx5-serdes: add function for getting the CMU index
phy: sparx5-serdes: add ops to match data
phy: sparx5-serdes: add constant for the number of CMU's
phy: sparx5-serdes: add constants to match data
phy: sparx5-serdes: add support for private match data
phy: bcm-ns-usb2: drop support for old binding variant
dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant
dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300
dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible
dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions
phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll()
phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l()
phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out()
phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New hardware support:
- Qualcomm SAR2130P GPI dma support
- Sifive PIC64GX pdma support
- Rcar r7s72100 support and associated updates
Updates:
- STM32 DMA3 updates for packing/unpacking mode and prevention of
additional xfers
- Simplification of devm_acpi_dma_controller_register() and associate
cleanup including headers
- loongson prefix renames
- Switch back to platform_driver::remove() subsystem update"
* tag 'dmaengine-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: loongson2-apb: Rename the prefix ls2x to loongson2
dt-bindings: dma: sifive pdma: Add PIC64GX to compatibles
dmaengine: fix typo in the comment
dmaengine: stm32-dma3: clamp AXI burst using match data
dmaengine: stm32-dma3: prevent LL refactoring thanks to DT configuration
dt-bindings: dma: stm32-dma3: prevent additional transfers
dmaengine: stm32-dma3: refactor HW linked-list to optimize memory accesses
dmaengine: stm32-dma3: prevent pack/unpack thanks to DT configuration
dt-bindings: dma: stm32-dma3: prevent packing/unpacking mode
dmaengine: idxd: Move DSA/IAA device IDs to IDXD driver
dt-bindings: dma: qcom,gpi: Add SAR2130P compatible
dmaengine: Switch back to struct platform_driver::remove()
dmaengine: ep93xx: Fix unsigned compared against 0
dmaengine: acpi: Clean up headers
dmaengine: acpi: Simplify devm_acpi_dma_controller_register()
dmaengine: acpi: Drop unused devm_acpi_dma_controller_free()
dmaengine: sh: rz-dmac: add r7s72100 support
dt-bindings: dma: rz-dmac: Document RZ/A1H SoC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Apart from the gpio-exar fix which addresses an older issue, they all
fix regressions from this release cycle:
- fix missing GPIO chip labels in gpio-zevio and gpio-altera
- for the latter: also set GPIO base to -1 to use dynamic range
allocation
- fix value setting with external pull-up/down resistor in gpio-exar
- use the recommended IDA interfaces in gpio-mpsse"
* tag 'gpio-fixes-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mpsse: Remove usage of the deprecated ida_simple_xx() API
gpio: exar: set value when external pull-up or pull-down is present
gpio: altera: Add missed base and label initialisations
gpio: zevio: Add missed label initialisation
|
|
Pull virtio updates from Michael Tsirkin:
"A small number of improvements all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_vdpa: remove redundant check on desc
virtio_fs: store actual queue index in mq_map
virtio_fs: add informative log for new tag discovery
virtio: Make vring_new_virtqueue support packed vring
virtio_pmem: Add freeze/restore callbacks
vdpa/mlx5: Fix suboptimal range on iotlb iteration
|
|
Pull VFIO updates from Alex Williamson:
- Constify an unmodified structure used in linking vfio and kvm
(Christophe JAILLET)
- Add ID for an additional hardware SKU supported by the nvgrace-gpu
vfio-pci variant driver (Ankit Agrawal)
- Fix incorrect signed cast in QAT vfio-pci variant driver, negating
test in check_add_overflow(), though still caught by later tests
(Giovanni Cabiddu)
- Additional debugfs attributes exposed in hisi_acc vfio-pci variant
driver for migration debugging (Longfang Liu)
- Migration support is added to the virtio vfio-pci variant driver,
becoming the primary feature of the driver while retaining emulation
of virtio legacy support as a secondary option (Yishai Hadas)
- Fixes to a few unwind flows in the mlx5 vfio-pci driver discovered
through reviews of the virtio variant driver (Yishai Hadas)
- Fix an unlikely issue where a PCI device exposed to userspace with an
unknown capability at the base of the extended capability chain can
overflow an array index (Avihai Horon)
* tag 'vfio-v6.13-rc1' of https://github.com/awilliam/linux-vfio:
vfio/pci: Properly hide first-in-list PCIe extended capability
vfio/mlx5: Fix unwind flows in mlx5vf_pci_save/resume_device_data()
vfio/mlx5: Fix an unwind issue in mlx5vf_add_migration_pages()
vfio/virtio: Enable live migration once VIRTIO_PCI was configured
vfio/virtio: Add PRE_COPY support for live migration
vfio/virtio: Add support for the basic live migration functionality
virtio-pci: Introduce APIs to execute device parts admin commands
virtio: Manage device and driver capabilities via the admin commands
virtio: Extend the admin command to include the result size
virtio_pci: Introduce device parts access commands
Documentation: add debugfs description for hisi migration
hisi_acc_vfio_pci: register debugfs for hisilicon migration driver
hisi_acc_vfio_pci: create subfunction for data reading
hisi_acc_vfio_pci: extract public functions for container_of
vfio/qat: fix overflow check in qat_vf_resume_write()
vfio/nvgrace-gpu: Add a new GH200 SKU to the devid table
kvm/vfio: Constify struct kvm_device_ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-v updates from Palmer Dabbelt:
- Support for pointer masking in userspace
- Support for probing vector misaligned access performance
- Support for qspinlock on systems with Zacas and Zabha
* tag 'riscv-for-linus-6.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
RISC-V: Remove unnecessary include from compat.h
riscv: Fix default misaligned access trap
riscv: Add qspinlock support
dt-bindings: riscv: Add Ziccrse ISA extension description
riscv: Add ISA extension parsing for Ziccrse
asm-generic: ticket-lock: Add separate ticket-lock.h
asm-generic: ticket-lock: Reuse arch_spinlock_t of qspinlock
riscv: Implement xchg8/16() using Zabha
riscv: Implement arch_cmpxchg128() using Zacas
riscv: Improve zacas fully-ordered cmpxchg()
riscv: Implement cmpxchg8/16() using Zabha
dt-bindings: riscv: Add Zabha ISA extension description
riscv: Implement cmpxchg32/64() using Zacas
riscv: Do not fail to build on byte/halfword operations with Zawrs
riscv: Move cpufeature.h macros into their own header
KVM: riscv: selftests: Add Smnpm and Ssnpm to get-reg-list test
RISC-V: KVM: Allow Smnpm and Ssnpm extensions for guests
riscv: hwprobe: Export the Supm ISA extension
riscv: selftests: Add a pointer masking test
riscv: Allow ptrace control of the tagged address ABI
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Fix build failure with GCC 15 due to default -std=gnu23
- Add PREEMPT_RT/PREEMPT_LAZY support
- Add I2S in DTS for Loongson-2K1000/Loongson-2K2000
- Some bug fixes and other small changes
* tag 'loongarch-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Update Loongson-3 default config file
LoongArch: dts: Add I2S support to Loongson-2K2000
LoongArch: dts: Add I2S support to Loongson-2K1000
LoongArch: Allow to enable PREEMPT_LAZY
LoongArch: Allow to enable PREEMPT_RT
LoongArch: Select HAVE_POSIX_CPU_TIMERS_TASK_WORK
LoongArch: Fix sleeping in atomic context for PREEMPT_RT
LoongArch: Reduce min_delta for the arch clockevent device
LoongArch: BPF: Sign-extend return values
LoongArch: Fix build failure with GCC 15 (-std=gnu23)
LoongArch: Explicitly specify code model in Makefile
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- replace hardcoded strings with str_on_off() in report_meminit()
- initialize reserved pages to MIGRATE_MOVABLE when deferred struct
page initialization is enabled so that if the reserved pages are
freed they are put on movable free lists like it is done now when
deferred struct page initialization is disabled
* tag 'memblock-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: uniformly initialize all reserved pages to MIGRATE_MOVABLE
mm: Use str_on_off() helper function in report_meminit()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules updates from Luis Chamberlain:
- The whole caching of module code into huge pages by Mike Rapoport is
going in through Andrew Morton's tree due to some other code
dependencies. That's really the biggest highlight for Linux kernel
modules in this release. With it we share huge pages for modules,
starting off with x86. Expect to see that soon through Andrew!
- Helge Deller addressed some lingering low hanging fruit alignment
enhancements by. It is worth pointing out that from his old patch
series I dropped his vmlinux.lds.h change at Masahiro's request as he
would prefer this to be specified in asm code [0].
[0] https://lore.kernel.org/all/20240129192644.3359978-5-mcgrof@kernel.org/T/#m9efef5e700fbecd28b7afb462c15eed8ba78ef5a
- Matthew Maurer and Sami Tolvanen have been tag teaming to help get us
closer to a modversions for Rust. In this cycle we take in quite a
lot of the refactoring for ELF validation. I expect modversions for
Rust will be merged by v6.14 as that code is mostly ready now.
- Adds a new modules selftests: kallsyms which helps us tests
find_symbol() and the limits of kallsyms on Linux today.
- We have a realtime mailing list to kernel-ci testing for modules now
which relies and combines patchwork, kpd and kdevops:
https://patchwork.kernel.org/project/linux-modules/list/
https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/README.md
https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/kernel-ci-kpd.md
https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/linux-modules-kdevops-ci.md
If you want to help avoid Linux kernel modules regressions, now its
simple, just add a new Linux modules sefltests under
tools/testing/selftests/module/ That is it. All new selftests will be
used and leveraged automatically by the CI.
* tag 'modules-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
tests/module/gen_test_kallsyms.sh: use 0 value for variables
scripts: Remove export_report.pl
selftests: kallsyms: add MODULE_DESCRIPTION
selftests: add new kallsyms selftests
module: Reformat struct for code style
module: Additional validation in elf_validity_cache_strtab
module: Factor out elf_validity_cache_strtab
module: Group section index calculations together
module: Factor out elf_validity_cache_index_str
module: Factor out elf_validity_cache_index_sym
module: Factor out elf_validity_cache_index_mod
module: Factor out elf_validity_cache_index_info
module: Factor out elf_validity_cache_secstrings
module: Factor out elf_validity_cache_sechdrs
module: Factor out elf_validity_ehdr
module: Take const arg in validate_section_offset
modules: Add missing entry for __ex_table
modules: Ensure 64-bit alignment on __ksymtab_* sections
|
|
Merge updates of Intel int3400 thermal driver for 6.13-rc1:
- Remove the data_vault attribute_group from int3400 because it is only
used for exposing one binary file that can be exposed directly (Thomas
Weißschuh).
- Prevent the current_uuid sysfs attribute in int3400 from mistakenly
treating valid UUID values as invalid on some older systems (Srinivas
Pandruvada).
* thermal-intel:
thermal: int3400: Remove unneeded data_vault attribute_group
thermal: int3400: Fix reading of current_uuid for active policy
|
|
Merge miscellaneous ACPI changes and x86-specific ACPI updates for
6.13-rc1:
- Introduce acpi_arch_init() for architecture-specific ACPI subsystem
initialization (Miao Wang).
- Clean up Asus quirks in acpi_quirk_skip_dmi_ids[] and add a quirk
to skip I2C clients on Acer Iconia One 8 A1-840 (Hans de Goede).
* acpi-misc:
ACPI: introduce acpi_arch_init()
* acpi-x86:
ACPI: x86: Clean up Asus entries in acpi_quirk_skip_dmi_ids[]
ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 8 A1-840
|
|
Merge OPP (Operating Performance Points) changes for 6.13-rc1:
- Describe opp-supported-hw property for ti-cpu (Dhruva Gole).
- Remove unused declarations from the OPP header file (Zhang Zekun).
* pm-opp:
dt-bindings: opp: operating-points-v2-ti-cpu: Describe opp-supported-hw
OPP: Remove unused declarations in header file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a few iomap bugs
- Fix a wrong argument in backing file callback
- Fix security mount option retrieval in statmount()
- Cleanup how statmount() handles unescaped options
- Add a missing inode_owner_or_capable() check for setting write hints
- Clear the return value in read_kcore_iter() after a successful
iov_iter_zero()
- Fix a mount_setattr() selftest
- Fix function signature in mount api documentation
- Remove duplicate include header in the fscache code
* tag 'vfs-6.13-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/backing_file: fix wrong argument in callback
fs_parser: update mount_api doc to match function signature
fs: require inode_owner_or_capable for F_SET_RW_HINT
fs/proc/kcore.c: Clear ret value in read_kcore_iter after successful iov_iter_zero
statmount: fix security option retrieval
statmount: clean up unescaped option handling
fscache: Remove duplicate included header
iomap: elide flush from partial eof zero range
iomap: lift zeroed mapping handling into iomap_zero_range()
iomap: reset per-iter state on non-error iter advances
iomap: warn on zero range of a post-eof folio
selftests/mount_setattr: Fix failures on 64K PAGE_SIZE kernels
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull deny_write_access revert from Christian Brauner:
"It turns out that the mold linker relies on the deny_write_access()
mechanism for executables.
The mold linker tries to open a file for writing and if ETXTBSY is
returned mold falls back to creating a new file"
* tag 'vfs-6.13.exec.deny_write_access.revert' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Revert "fs: don't block i_writecount during exec"
|
|
This reverts commit 2a010c41285345da60cece35575b4e0af7e7bf44.
Rui Ueyama <rui314@gmail.com> writes:
> I'm the creator and the maintainer of the mold linker
> (https://github.com/rui314/mold). Recently, we discovered that mold
> started causing process crashes in certain situations due to a change
> in the Linux kernel. Here are the details:
>
> - In general, overwriting an existing file is much faster than
> creating an empty file and writing to it on Linux, so mold attempts to
> reuse an existing executable file if it exists.
>
> - If a program is running, opening the executable file for writing
> previously failed with ETXTBSY. If that happens, mold falls back to
> creating a new file.
>
> - However, the Linux kernel recently changed the behavior so that
> writing to an executable file is now always permitted
> (https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2a010c412853).
>
> That caused mold to write to an executable file even if there's a
> process running that file. Since changes to mmap'ed files are
> immediately visible to other processes, any processes running that
> file would almost certainly crash in a very mysterious way.
> Identifying the cause of these random crashes took us a few days.
>
> Rejecting writes to an executable file that is currently running is a
> well-known behavior, and Linux had operated that way for a very long
> time. So, I don’t believe relying on this behavior was our mistake;
> rather, I see this as a regression in the Linux kernel.
Quoting myself from commit 2a010c412853 ("fs: don't block i_writecount during exec")
> Yes, someone in userspace could potentially be relying on this. It's not
> completely out of the realm of possibility but let's find out if that's
> actually the case and not guess.
It seems we found out that someone is relying on this obscure behavior.
So revert the change.
Link: https://github.com/rui314/mold/issues/1361
Link: https://lore.kernel.org/r/4a2bc207-76be-4715-8e12-7fc45a76a125@leemhuis.info
Cc: <stable@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg update from Bjorn Andersson:
"Correct GLINK driver's decoding of the CMD_OPEN message, as upper half
of the second parameter encodes 'priority', and 'length' is only the
lower half"
* tag 'rpmsg-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: use only lower 16-bits of param2 for CMD_OPEN name length
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Make Qualcomm TrustZone Peripherial Authentication Service-remoteproc
identifier/name human friendly. Add audio DSP support for the Qualcomm
SAR2130P. Ensure IMEM access in the Qualcomm modem remoteproc driver
is performed prior to the firmware enabling the XPU and locking us
out.
Improve error handling, error logging, compile testing support, and a
few other stylistic things across a variety of the drivers"
* tag 'rproc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (30 commits)
remoteproc: qcom: wcss: Remove double assignment in q6v5_wcss_probe()
remoteproc: qcom_q6v5_mss: Re-order writes to the IMEM region
remoteproc: qcom_wcnss_iris: Simplify with dev_err_probe()
remoteproc: qcom_q6v5_wcss: Simplify with dev_err_probe()
remoteproc: qcom_q6v5_pas: Simplify with dev_err_probe()
remoteproc: qcom_q6v5_mss: Drop redundant error printks in probe
remoteproc: qcom_q6v5_mss: Simplify with dev_err_probe()
remoteproc: qcom_q6v5_adsp: Simplify with dev_err_probe()
remoteproc: qcom_q6v5_pas: disable auto boot for wpss
remoteproc: qcom: pas: Make remoteproc name human friendly
remoteproc: qcom: pas: enable SAR2130P audio DSP support
remoteproc: qcom: pas: add minidump_id to SM8350 resources
dt-bindings: remoteproc: qcom,sm8350-pas: add SAR2130P aDSP compatible
dt-bindings: remoteproc: qcom,sm8550-pas: Add SM8750 ADSP
remoteproc: qcom: wcss: Remove subdevs on the error path of q6v5_wcss_probe()
remoteproc: qcom: adsp: Remove subdevs on the error path of adsp_probe()
remoteproc: qcom: pas: Remove subdevs on the error path of adsp_probe()
remoteproc: Switch back to struct platform_driver::remove()
remoteproc: k3-dsp: Force cast from iomem address space
remoteproc: k3-r5: Force cast from iomem address space
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- aquacomputer_d5next: Fix length of speed_input array
- tps23861: Fix reporting of negative temperatures
- tmp108: Do not fail in I3C probe when I3C regmap is a module
* tag 'hwmon-for-v6.13-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (aquacomputer_d5next) Fix length of speed_input array
hwmon: (tps23861) Fix reporting of negative temperatures
hwmon: (tmp108) Do not fail in I3C probe when I3C regmap is a module
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Core:
- avoid possible deadlock on probe
- ensured preferred address is used on hot-join
Drivers:
- dw: add AMD I3C controller support
- mipi-i3c-hci: fix SETDASA, DMA interrupts fixes
- svc: many fixes for IBI and hotjoin"
* tag 'i3c/for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: Use i3cdev->desc->info instead of calling i3c_device_get_info() to avoid deadlock
i3c: mipi-i3c-hci: Support SETDASA CCC
i3c: dw: Add quirk to address OD/PP timing issue on AMD platform
i3c: dw: Add support for AMDI0015 ACPI ID
i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter
i3c: Document I3C_ADDR_SLOT_EXT_STATUS_MASK
i3c: master: svc: Fix pm_runtime_set_suspended() with runtime pm enabled
i3c: mipi-i3c-hci: Handle interrupts according to current specifications
i3c: mipi-i3c-hci: Mask ring interrupts before ring stop request
i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs()
i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin
i3c: master: svc: fix possible assignment of the same address to two devices
i3c: master: svc: wait for Manual ACK/NACK Done before next step
i3c: master: svc: use spin_lock_irqsave at svc_i3c_master_ibi_work()
i3c: master: svc: need check IBIWON for dynamic address assignment
i3c: master: svc: manually emit NACK/ACK for hotjoin
i3c: master: svc: use repeat start when IBI WIN happens
i3c: master: Fix dynamic address leak when 'assigned-address' is present
i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_DESIRED
i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_STATUS_BITS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
|
|
When I merged the rust 'use' imports, I didn't realize that there's
an offical preferred idiomatic format - so while it all worked fine,
it doesn't match what 'make rustfmt' wants to make it.
Fix it up appropriately.
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"perf record:
- Enable leader sampling for inherited task events. It was supported
only for system-wide events but the kernel started to support such
a setup since v6.12.
This is to reduce the number of PMU interrupts. The samples of the
leader event will contain counts of other events and no samples
will be generated for the other member events.
$ perf record -e '{cycles,instructions}:S' ${MYPROG}
perf report:
- Fix --branch-history option to display more branch-related
information like prediction, abort and cycles which is available
on Intel machines.
$ perf record -bg -- perf test -w brstack
$ perf report --branch-history
...
#
# Overhead Source:Line Symbol Shared Object Predicted Abort Cycles IPC [IPC Coverage]
# ........ ........................ .............. .................... ......... ..... ...... ....................
#
8.17% copy_page_64.S:19 [k] copy_page [kernel.kallsyms] 50.0% 0 5 - -
|
---xas_load xarray.h:171
|
|--5.68%--xas_load xarray.c:245 (cycles:1)
| xas_load xarray.c:242
| xas_load xarray.h:1260 (cycles:1)
| xas_descend xarray.c:146
| xas_load xarray.c:244 (cycles:2)
| xas_load xarray.c:245
| xas_descend xarray.c:218 (cycles:10)
...
perf stat:
- Add HWMON PMU support.
The HWMON provides various system information like CPU/GPU
temperature, fan speed and so on. Expose them as PMU events so that
users can see the values using perf stat commands.
$ perf stat -e temp_cpu,fan1 true
Performance counter stats for 'true':
60.00 'C temp_cpu
0 rpm fan1
0.000745382 seconds time elapsed
0.000883000 seconds user
0.000000000 seconds sys
- Display metric threshold in JSON output.
Some metrics define thresholds to classify value ranges. It used to
be in a different color but it won't work for JSON.
Add "metric-threshold" field to the JSON that can be one of "good",
"less good", "nearly bad" and "bad".
# perf stat -a -M TopdownL1 -j true
{"counter-value" : "18693525.000000", "unit" : "", "event" : "TOPDOWN.SLOTS", "event-runtime" : 5552708, "pcnt-running" : 100.00, "metric-value" : "43.226002", "metric-unit" : "% tma_backend_bound", "metric-threshold" : "bad"}
{"metric-value" : "29.212267", "metric-unit" : "% tma_frontend_bound", "metric-threshold" : "bad"}
{"metric-value" : "7.138972", "metric-unit" : "% tma_bad_speculation", "metric-threshold" : "good"}
{"metric-value" : "20.422759", "metric-unit" : "% tma_retiring", "metric-threshold" : "good"}
{"counter-value" : "3817732.000000", "unit" : "", "event" : "topdown-retiring", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "5472824.000000", "unit" : "", "event" : "topdown-fe-bound", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "7984780.000000", "unit" : "", "event" : "topdown-be-bound", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "1418181.000000", "unit" : "", "event" : "topdown-bad-spec", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
...
perf sched:
- Add -P/--pre-migrations option for 'timehist' sub-command to track
time a task waited on a run-queue before migrating to a different
CPU.
$ perf sched timehist -P
time cpu task name wait time sch delay run time pre-mig time
[tid/pid] (msec) (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- --------- ---------
585940.535527 [0000] perf[584885] 0.000 0.000 0.000 0.000
585940.535535 [0000] migration/0[20] 0.000 0.002 0.008 0.000
585940.535559 [0001] perf[584885] 0.000 0.000 0.000 0.000
585940.535563 [0001] migration/1[25] 0.000 0.001 0.004 0.000
585940.535678 [0002] perf[584885] 0.000 0.000 0.000 0.000
585940.535686 [0002] migration/2[31] 0.000 0.002 0.008 0.000
585940.535905 [0001] <idle> 0.000 0.000 0.342 0.000
585940.535938 [0003] perf[584885] 0.000 0.000 0.000 0.000
585940.537048 [0001] sleep[584886] 0.000 0.019 1.142 0.001
585940.537749 [0002] <idle> 0.000 0.000 2.062 0.000
...
Build:
- Make libunwind opt-in (LIBUNWIND=1) rather than opt-out.
The perf tools are generally built with libelf and libdw which has
unwinder functionality. The libunwind support predates it and no
need to have duplicate unwinders by default.
- Rename NO_DWARF=1 build option to NO_LIBDW=1 in order to clarify
it's using libdw for handling DWARF information.
Internals:
- Do not set exclude_guest bit in the perf_event_attr by default.
This was causing a trouble in AMD IBS PMU as it doesn't support the
bit. The bit will be set when it's needed later by the fallback
logic. Also update the missing feature detection logic to make sure
not clear supported bits unnecessarily.
- Run perf test in parallel by default and mark flaky tests
"exclusive" to run them serially at the end. Some test numbers are
changed but the test can complete in less than half the time.
JSON vendor events:
- Add AMD Zen 5 events and metrics.
- Add i.MX91 and i.MX95 DDR metrics
- Fix HiSilicon HIP08 Topdown metric name.
- Support compat events on PowerPC"
* tag 'perf-tools-for-v6.13-2024-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (232 commits)
perf tests: Fix hwmon parsing with PMU name test
perf hwmon_pmu: Ensure hwmon key union is zeroed before use
perf tests hwmon_pmu: Remove double evlist__delete()
perf/test: fix perf ftrace test on s390
perf bpf-filter: Return -ENOMEM directly when pfi allocation fails
perf test: Correct hwmon test PMU detection
perf: Remove unused del_perf_probe_events()
perf pmu: Move pmu_metrics_table__find and remove ARM override
perf jevents: Add map_for_cpu()
perf header: Pass a perf_cpu rather than a PMU to get_cpuid_str
perf header: Avoid transitive PMU includes
perf arm64 header: Use cpu argument in get_cpuid
perf header: Refactor get_cpuid to take a CPU for ARM
perf header: Move is_cpu_online to numa bench
perf jevents: fix breakage when do perf stat on system metric
perf test: Add missing __exit calls in tool/hwmon tests
perf tests: Make leader sampling test work without branch event
perf util: Remove kernel version deadcode
perf test shell trace_exit_race: Use --no-comm to avoid cases where COMM isn't resolved
perf test shell trace_exit_race: Show what went wrong in verbose mode
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture update from Helge Deller:
- Fix function graph tracing disablement on parisc
* tag 'parisc-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/ftrace: Fix function graph tracing disablement
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
- only include FEC platform entries when hardware supports it
- fix typo in ifdef config name
* tag 'm68knommu-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire/device.c: only build FEC when HW macros are defined
m68k: mcfgpio: Fix incorrect register offset for CONFIG_M5441x
|
|
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a series of lints, including safety-related ones, e.g. the
compiler will now warn about missing safety comments, as well as
unnecessary ones. How safety documentation is organized is a
frequent source of review comments, thus having the compiler guide
new developers on where they are expected (and where not) is very
nice.
- Start using '#[expect]': an interesting feature in Rust (stabilized
in 1.81.0) that makes the compiler warn if an expected warning was
_not_ emitted. This is useful to avoid forgetting cleaning up
locally ignored diagnostics ('#[allow]'s).
- Introduce '.clippy.toml' configuration file for Clippy, the Rust
linter, which will allow us to tweak its behaviour. For instance,
our first use cases are declaring a disallowed macro and, more
importantly, enabling the checking of private items.
- Lints-related fixes and cleanups related to the items above.
- Migrate from 'receiver_trait' to 'arbitrary_self_types': to get the
kernel into stable Rust, one of the major pieces of the puzzle is
the support to write custom types that can be used as 'self', i.e.
as receivers, since the kernel needs to write types such as 'Arc'
that common userspace Rust would not. 'arbitrary_self_types' has
been accepted to become stable, and this is one of the steps
required to get there.
- Remove usage of the 'new_uninit' unstable feature.
- Use custom C FFI types. Includes a new 'ffi' crate to contain our
custom mapping, instead of using the standard library 'core::ffi'
one. The actual remapping will be introduced in a later cycle.
- Map '__kernel_{size_t,ssize_t,ptrdiff_t}' to 'usize'/'isize'
instead of 32/64-bit integers.
- Fix 'size_t' in bindgen generated prototypes of C builtins.
- Warn on bindgen < 0.69.5 and libclang >= 19.1 due to a double issue
in the projects, which we managed to trigger with the upcoming
tracepoint support. It includes a build test since some
distributions backported the fix (e.g. Debian -- thanks!). All
major distributions we list should be now OK except Ubuntu non-LTS.
'macros' crate:
- Adapt the build system to be able run the doctests there too; and
clean up and enable the corresponding doctests.
'kernel' crate:
- Add 'alloc' module with generic kernel allocator support and remove
the dependency on the Rust standard library 'alloc' and the
extension traits we used to provide fallible methods with flags.
Add the 'Allocator' trait and its implementations '{K,V,KV}malloc'.
Add the 'Box' type (a heap allocation for a single value of type
'T' that is also generic over an allocator and considers the
kernel's GFP flags) and its shorthand aliases '{K,V,KV}Box'. Add
'ArrayLayout' type. Add 'Vec' (a contiguous growable array type)
and its shorthand aliases '{K,V,KV}Vec', including iterator
support.
For instance, now we may write code such as:
let mut v = KVec::new();
v.push(1, GFP_KERNEL)?;
assert_eq!(&v, &[1]);
Treewide, move as well old users to these new types.
- 'sync' module: add global lock support, including the
'GlobalLockBackend' trait; the 'Global{Lock,Guard,LockedBy}' types
and the 'global_lock!' macro. Add the 'Lock::try_lock' method.
- 'error' module: optimize 'Error' type to use 'NonZeroI32' and make
conversion functions public.
- 'page' module: add 'page_align' function.
- Add 'transmute' module with the existing 'FromBytes' and 'AsBytes'
traits.
- 'block::mq::request' module: improve rendered documentation.
- 'types' module: extend 'Opaque' type documentation and add simple
examples for the 'Either' types.
drm/panic:
- Clean up a series of Clippy warnings.
Documentation:
- Add coding guidelines for lints and the '#[expect]' feature.
- Add Ubuntu to the list of distributions in the Quick Start guide.
MAINTAINERS:
- Add Danilo Krummrich as maintainer of the new 'alloc' module.
And a few other small cleanups and fixes"
* tag 'rust-6.13' of https://github.com/Rust-for-Linux/linux: (82 commits)
rust: alloc: Fix `ArrayLayout` allocations
docs: rust: remove spurious item in `expect` list
rust: allow `clippy::needless_lifetimes`
rust: warn on bindgen < 0.69.5 and libclang >= 19.1
rust: use custom FFI integer types
rust: map `__kernel_size_t` and friends also to usize/isize
rust: fix size_t in bindgen prototypes of C builtins
rust: sync: add global lock support
rust: macros: enable the rest of the tests
rust: macros: enable paste! use from macro_rules!
rust: enable macros::module! tests
rust: kbuild: expand rusttest target for macros
rust: types: extend `Opaque` documentation
rust: block: fix formatting of `kernel::block::mq::request` module
rust: macros: fix documentation of the paste! macro
rust: kernel: fix THIS_MODULE header path in ThisModule doc comment
rust: page: add Rust version of PAGE_ALIGN
rust: helpers: remove unnecessary header includes
rust: exports: improve grammar in commentary
drm/panic: allow verbose version check
...
|
|
Pull more documentation updates from Jonathan Corbet:
"A few late-arriving fixes, plus two more significant changes that were
*almost* ready at the beginning of the merge window:
- A new document on debugging techniques from Sebastian Fricke
- A clarification on MODULE_LICENSE terms meant to head off the sort
of confusion that led to the recent Tuxedo Computers mess"
* tag 'docs-6.13-2' of git://git.lwn.net/linux:
docs: Add debugging guide for the media subsystem
docs: Add debugging section to process
docs/licensing: Clarify wording about "GPL" and "Proprietary"
docs: core-api/gfp_mask-from-fs-io: indicate that vmalloc supports GFP_NOFS/GFP_NOIO
Documentation: kernel-doc: enumerate identifier *type*s
Documentation: pwrseq: Fix trivial misspellings
Documentation: filesystems: update filename extensions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull ecryptfs mount api conversion from Christian Brauner:
"Convert ecryptfs to the new mount api"
* tag 'vfs-6.13.ecryptfs.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ecryptfs: Fix spelling mistake "validationg" -> "validating"
ecryptfs: Convert ecryptfs to use the new mount API
ecryptfs: Factor out mount option validation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs exportfs updates from Christian Brauner:
"This contains work to bring NFS connectable file handles to userspace
servers.
The name_to_handle_at() system call is extended to encode connectable
file handles. Such file handles can be resolved to an open file with a
connected path. So far userspace NFS servers couldn't make use of this
functionality even though the kernel does already support it. This is
achieved by introducing a new flag for name_to_handle_at().
Similarly, the open_by_handle_at() system call is tought to understand
connectable file handles explicitly created via name_to_handle_at()"
* tag 'vfs-6.13.exportfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: open_by_handle_at() support for decoding "explicit connectable" file handles
fs: name_to_handle_at() support for "explicit connectable" file handles
fs: prepare for "explicit connectable" file handles
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pid_namespace rust bindings from Christian Brauner:
"This contains my Rust bindings for pid namespaces needed for various
rust drivers. Here's a description of the basic C semantics and how
they are mapped to Rust.
The pid namespace of a task doesn't ever change once the task is
alive. A unshare(CLONE_NEWPID) or setns(fd_pidns/pidfd, CLONE_NEWPID)
will not have an effect on the calling task's pid namespace. It will
only effect the pid namespace of children created by the calling task.
This invariant guarantees that after having acquired a reference to a
task's pid namespace it will remain unchanged.
When a task has exited and been reaped release_task() will be called.
This will set the pid namespace of the task to NULL. So retrieving the
pid namespace of a task that is dead will return NULL. Note, that
neither holding the RCU lock nor holding a reference count to the task
will prevent release_task() from being called.
In order to retrieve the pid namespace of a task the
task_active_pid_ns() function can be used. There are two cases to
consider:
(1) retrieving the pid namespace of the current task
(2) retrieving the pid namespace of a non-current task
From system call context retrieving the pid namespace for case (1) is
always safe and requires neither RCU locking nor a reference count to
be held. Retrieving the pid namespace after release_task() for current
will return NULL but no codepath like that is exposed to Rust.
Retrieving the pid namespace from system call context for (2) requires
RCU protection. Accessing a pid namespace outside of RCU protection
requires a reference count that must've been acquired while holding
the RCU lock. Note that accessing a non-current task means NULL can be
returned as the non-current task could have already passed through
release_task().
To retrieve (1) the current_pid_ns!() macro should be used. It ensures
that the returned pid namespace cannot outlive the calling scope. The
associated current_pid_ns() function should not be called directly as
it could be abused to created an unbounded lifetime for the pid
namespace. The current_pid_ns!() macro allows Rust to handle the
common case of accessing current's pid namespace without RCU
protection and without having to acquire a reference count.
For (2) the task_get_pid_ns() method must be used. This will always
acquire a reference on the pid namespace and will return an Option to
force the caller to explicitly handle the case where pid namespace is
None. Something that tends to be forgotten when doing the equivalent
operation in C.
Missing RCU primitives make it difficult to perform operations that
are otherwise safe without holding a reference count as long as RCU
protection is guaranteed. But it is not important currently. But we do
want it in the future.
Note that for (2) the required RCU protection around calling
task_active_pid_ns() synchronizes against putting the last reference
of the associated struct pid of task->thread_pid. The struct pid
stored in that field is used to retrieve the pid namespace of the
caller. When release_task() is called task->thread_pid will be NULLed
and put_pid() on said struct pid will be delayed in free_pid() via
call_rcu() allowing everyone with an RCU protected access to the
struct pid acquired from task->thread_pid to finish"
* tag 'vfs-6.13.rust.pid_namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
rust: add PidNamespace
|
|
Pull nfsd updates from Chuck Lever:
"Jeff Layton contributed a scalability improvement to NFSD's NFSv4
backchannel session implementation. This improvement is intended to
increase the rate at which NFSD can safely recall NFSv4 delegations
from clients, to avoid the need to revoke them. Revoking requires a
slow state recovery process.
A wide variety of bug fixes and other incremental improvements make up
the bulk of commits in this series. As always I am grateful to the
NFSD contributors, reviewers, testers, and bug reporters who
participated during this cycle"
* tag 'nfsd-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (72 commits)
nfsd: allow for up to 32 callback session slots
nfs_common: must not hold RCU while calling nfsd_file_put_local
nfsd: get rid of include ../internal.h
nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur
NFSD: Add nfsd4_copy time-to-live
NFSD: Add a laundromat reaper for async copy state
NFSD: Block DESTROY_CLIENTID only when there are ongoing async COPY operations
NFSD: Handle an NFS4ERR_DELAY response to CB_OFFLOAD
NFSD: Free async copy information in nfsd4_cb_offload_release()
NFSD: Fix nfsd4_shutdown_copy()
NFSD: Add a tracepoint to record canceled async COPY operations
nfsd: make nfsd4_session->se_flags a bool
nfsd: remove nfsd4_session->se_bchannel
nfsd: make use of warning provided by refcount_t
nfsd: Don't fail OP_SETCLIENTID when there are too many clients.
svcrdma: fix miss destroy percpu_counter in svc_rdma_proc_init()
xdrgen: Remove program_stat_to_errno() call sites
xdrgen: Update the files included in client-side source code
xdrgen: Remove check for "nfs_ok" in C templates
xdrgen: Remove tracepoint call site
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This series introduces a device aliasing feature where user can carve
out partitions but reclaim the space back by deleting aliased file in
root dir.
In addition to that, there're numerous minor bug fixes in zoned device
support, checkpoint=disable, extent cache management, fiemap, and
lazytime mount option. The full list of noticeable changes can be
found below.
Enhancements:
- introduce device aliasing file
- add stats in debugfs to show multiple devices
- add a sysfs node to limit max read extent count per-inode
- modify f2fs_is_checkpoint_ready logic to allow more data to be
written with the CP disable
- decrease spare area for pinned files for zoned devices
Fixes:
- Revert "f2fs: remove unreachable lazytime mount option parsing"
- adjust unusable cap before checkpoint=disable mode
- fix to drop all discards after creating snapshot on lvm device
- fix to shrink read extent node in batches
- fix changing cursegs if recovery fails on zoned device
- fix to adjust appropriate length for fiemap
- fix fiemap failure issue when page size is 16KB
- fix to avoid forcing direct write to use buffered IO on inline_data
inode
- fix to map blocks correctly for direct write
- fix to account dirty data in __get_secs_required()
- fix null-ptr-deref in f2fs_submit_page_bio()
- fix inconsistent update of i_blocks in release_compress_blocks and
reserve_compress_blocks"
* tag 'f2fs-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (40 commits)
f2fs: fix to drop all discards after creating snapshot on lvm device
f2fs: add a sysfs node to limit max read extent count per-inode
f2fs: fix to shrink read extent node in batches
f2fs: print message if fscorrupted was found in f2fs_new_node_page()
f2fs: clear SBI_POR_DOING before initing inmem curseg
f2fs: fix changing cursegs if recovery fails on zoned device
f2fs: adjust unusable cap before checkpoint=disable mode
f2fs: fix to requery extent which cross boundary of inquiry
f2fs: fix to adjust appropriate length for fiemap
f2fs: clean up w/ F2FS_{BLK_TO_BYTES,BTYES_TO_BLK}
f2fs: fix to do cast in F2FS_{BLK_TO_BYTES, BTYES_TO_BLK} to avoid overflow
f2fs: replace deprecated strcpy with strscpy
Revert "f2fs: remove unreachable lazytime mount option parsing"
f2fs: fix to avoid forcing direct write to use buffered IO on inline_data inode
f2fs: fix to map blocks correctly for direct write
f2fs: fix race in concurrent f2fs_stop_gc_thread
f2fs: fix fiemap failure issue when page size is 16KB
f2fs: remove redundant atomic file check in defragment
f2fs: fix to convert log type to segment data type correctly
f2fs: clean up the unused variable additional_reserved_segments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Add page -> folio conversions (Joanne Koong, Josef Bacik)
- Allow max size of fuse requests to be configurable with a sysctl
(Joanne Koong)
- Allow FOPEN_DIRECT_IO to take advantage of async code path (yangyun)
- Fix large kernel reads (like a module load) in virtio_fs (Hou Tao)
- Fix attribute inconsistency in case readdirplus (and plain lookup in
corner cases) is racing with inode eviction (Zhang Tianci)
- Fix a WARN_ON triggered by virtio_fs (Asahi Lina)
* tag 'fuse-update-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (30 commits)
virtiofs: dax: remove ->writepages() callback
fuse: check attributes staleness on fuse_iget()
fuse: remove pages for requests and exclusively use folios
fuse: convert direct io to use folios
mm/writeback: add folio_mark_dirty_lock()
fuse: convert writebacks to use folios
fuse: convert retrieves to use folios
fuse: convert ioctls to use folios
fuse: convert writes (non-writeback) to use folios
fuse: convert reads to use folios
fuse: convert readdir to use folios
fuse: convert readlink to use folios
fuse: convert cuse to use folios
fuse: add support in virtio for requests using folios
fuse: support folios in struct fuse_args_pages and fuse_copy_pages()
fuse: convert fuse_notify_store to use folios
fuse: convert fuse_retrieve to use folios
fuse: use the folio based vmstat helpers
fuse: convert fuse_writepage_need_send to take a folio
fuse: convert fuse_do_readpage to use folios
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Fix the code that cleans up left-over unlinked files.
Various fixes and minor improvements in deleting files cached or held
open remotely.
- Simplify the use of dlm's DLM_LKF_QUECVT flag.
- A few other minor cleanups.
* tag 'gfs2-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (21 commits)
gfs2: Prevent inode creation race
gfs2: Only defer deletes when we have an iopen glock
gfs2: Simplify DLM_LKF_QUECVT use
gfs2: gfs2_evict_inode clarification
gfs2: Make gfs2_inode_refresh static
gfs2: Use get_random_u32 in gfs2_orlov_skip
gfs2: Randomize GLF_VERIFY_DELETE work delay
gfs2: Use mod_delayed_work in gfs2_queue_try_to_evict
gfs2: Update to the evict / remote delete documentation
gfs2: Call gfs2_queue_verify_delete from gfs2_evict_inode
gfs2: Clean up delete work processing
gfs2: Minor delete_work_func cleanup
gfs2: Return enum evict_behavior from gfs2_upgrade_iopen_glock
gfs2: Rename dinode_demise to evict_behavior
gfs2: Rename GIF_{DEFERRED -> DEFER}_DELETE
gfs2: Faster gfs2_upgrade_iopen_glock wakeups
KMSAN: uninit-value in inode_go_dump (5)
gfs2: Fix unlinked inode cleanup
gfs2: Allow immediate GLF_VERIFY_DELETE work
gfs2: Initialize gl_no_formal_ino earlier
...
|
|
Without this I get a bunch of build errors like
In file included from ./include/linux/sched/task_stack.h:12,
from ./arch/riscv/include/asm/compat.h:12,
from ./arch/riscv/include/asm/pgtable.h:115,
from ./include/linux/pgtable.h:6,
from ./include/linux/mm.h:30,
from arch/riscv/kernel/asm-offsets.c:8:
./include/linux/kasan.h:50:37: error: ‘MAX_PTRS_PER_PTE’ undeclared here (not in a function); did you mean ‘PTRS_PER_PTE’?
50 | extern pte_t kasan_early_shadow_pte[MAX_PTRS_PER_PTE + PTE_HWTABLE_PTRS];
| ^~~~~~~~~~~~~~~~
| PTRS_PER_PTE
./include/linux/kasan.h:51:8: error: unknown type name ‘pmd_t’; did you mean ‘pgd_t’?
51 | extern pmd_t kasan_early_shadow_pmd[MAX_PTRS_PER_PMD];
| ^~~~~
| pgd_t
./include/linux/kasan.h:51:37: error: ‘MAX_PTRS_PER_PMD’ undeclared here (not in a function); did you mean ‘PTRS_PER_PGD’?
51 | extern pmd_t kasan_early_shadow_pmd[MAX_PTRS_PER_PMD];
| ^~~~~~~~~~~~~~~~
| PTRS_PER_PGD
./include/linux/kasan.h:52:8: error: unknown type name ‘pud_t’; did you mean ‘pgd_t’?
52 | extern pud_t kasan_early_shadow_pud[MAX_PTRS_PER_PUD];
| ^~~~~
| pgd_t
./include/linux/kasan.h:52:37: error: ‘MAX_PTRS_PER_PUD’ undeclared here (not in a function); did you mean ‘PTRS_PER_PGD’?
52 | extern pud_t kasan_early_shadow_pud[MAX_PTRS_PER_PUD];
| ^~~~~~~~~~~~~~~~
| PTRS_PER_PGD
./include/linux/kasan.h:53:8: error: unknown type name ‘p4d_t’; did you mean ‘pgd_t’?
53 | extern p4d_t kasan_early_shadow_p4d[MAX_PTRS_PER_P4D];
| ^~~~~
| pgd_t
./include/linux/kasan.h:53:37: error: ‘MAX_PTRS_PER_P4D’ undeclared here (not in a function); did you mean ‘PTRS_PER_PGD’?
53 | extern p4d_t kasan_early_shadow_p4d[MAX_PTRS_PER_P4D];
| ^~~~~~~~~~~~~~~~
| PTRS_PER_PGD
Link: https://lore.kernel.org/r/20241126143250.29708-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Bring in an overlayfs fix for v6.13-rc1 that fixes a bug introduced by
the overlayfs changes merged for v6.13.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit 48b50624aec4 ("backing-file: clean up the API") unintentionally
changed the argument in the ->accessed() callback from the user file to
the backing file.
Fixes: 48b50624aec4 ("backing-file: clean up the API")
Reported-by: syzbot+8d1206605b05ca9a0e6a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-unionfs/67447b3c.050a0220.1cc393.0085.GAE@google.com/
Tested-by: syzbot+8d1206605b05ca9a0e6a@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20241126145342.364869-1-amir73il@gmail.com
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Obtain the device node reference with scoped/cleanup.h to reduce error
handling and make the code a bit simpler.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241010-b4-cleanup-h-of-node-put-thermal-v4-6-bfbe29ad81f4@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241010-b4-cleanup-h-of-node-put-thermal-v4-5-bfbe29ad81f4@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241010-b4-cleanup-h-of-node-put-thermal-v4-4-bfbe29ad81f4@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Obtain the device node reference with scoped/cleanup.h to reduce error
handling and make the code a bit simpler.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241010-b4-cleanup-h-of-node-put-thermal-v4-3-bfbe29ad81f4@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
thermal_of_trips_init()
Obtain the device node reference and allocate memory with
scoped/cleanup.h to reduce error handling and make the code a bit
simpler.
The code is not equivalent in one minor aspect: outgoing parameter
"*ntrips" will not be zeroed on errors of memory allocation. This
difference is not important, because code was already not zeroing it in
case of earlier errors and the only caller does not rely on ntrips being
0 in case of errors.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20241010-b4-cleanup-h-of-node-put-thermal-v4-2-bfbe29ad81f4@linaro.org
[ rjw: Rebase ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241010-b4-cleanup-h-of-node-put-thermal-v4-1-bfbe29ad81f4@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
