diff options
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/imx.c | 31 |
1 files changed, 22 insertions, 9 deletions
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 0f616419213c..db1987a0f513 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -139,6 +139,7 @@ #define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ #define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ #define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ +#define USR1_AGTIM (1<<8) /* Ageing timer interrupt flag */ #define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ #define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ #define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ @@ -728,11 +729,15 @@ static void imx_dma_rxint(struct imx_port *sport) if ((temp & USR2_RDR) && !sport->dma_is_rxing) { sport->dma_is_rxing = 1; - /* disable the `Recerver Ready Interrrupt` */ + /* disable the receiver ready and aging timer interrupts */ temp = readl(sport->port.membase + UCR1); temp &= ~(UCR1_RRDYEN); writel(temp, sport->port.membase + UCR1); + temp = readl(sport->port.membase + UCR2); + temp &= ~(UCR2_ATEN); + writel(temp, sport->port.membase + UCR2); + /* tell the DMA to receive the data. */ start_rx_dma(sport); } @@ -749,7 +754,7 @@ static irqreturn_t imx_int(int irq, void *dev_id) sts = readl(sport->port.membase + USR1); sts2 = readl(sport->port.membase + USR2); - if (sts & USR1_RRDY) { + if (sts & (USR1_RRDY | USR1_AGTIM)) { if (sport->dma_is_enabled) imx_dma_rxint(sport); else @@ -860,11 +865,15 @@ static void imx_rx_dma_done(struct imx_port *sport) spin_lock_irqsave(&sport->port.lock, flags); - /* Enable this interrupt when the RXFIFO is empty. */ + /* re-enable interrupts to get notified when new symbols are incoming */ temp = readl(sport->port.membase + UCR1); temp |= UCR1_RRDYEN; writel(temp, sport->port.membase + UCR1); + temp = readl(sport->port.membase + UCR2); + temp |= UCR2_ATEN; + writel(temp, sport->port.membase + UCR2); + sport->dma_is_rxing = 0; /* Is the shutdown waiting for us? */ @@ -1068,6 +1077,10 @@ static void imx_enable_dma(struct imx_port *sport) UCR1_ICD_REG(3); writel(temp, sport->port.membase + UCR1); + temp = readl(sport->port.membase + UCR2); + temp |= UCR2_ATEN; + writel(temp, sport->port.membase + UCR2); + /* set UCR4 */ temp = readl(sport->port.membase + UCR4); temp |= UCR4_IDDMAEN; @@ -1087,7 +1100,7 @@ static void imx_disable_dma(struct imx_port *sport) /* clear UCR2 */ temp = readl(sport->port.membase + UCR2); - temp &= ~(UCR2_CTSC | UCR2_CTS); + temp &= ~(UCR2_CTSC | UCR2_CTS | UCR2_ATEN); writel(temp, sport->port.membase + UCR2); /* clear UCR4 */ @@ -1279,7 +1292,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, { struct imx_port *sport = (struct imx_port *)port; unsigned long flags; - unsigned int ucr2, old_ucr1, old_txrxen, baud, quot; + unsigned int ucr2, old_ucr1, old_ucr2, baud, quot; unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; unsigned int div, ufcr; unsigned long num, denom; @@ -1388,10 +1401,10 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, barrier(); /* then, disable everything */ - old_txrxen = readl(sport->port.membase + UCR2); - writel(old_txrxen & ~(UCR2_TXEN | UCR2_RXEN), + old_ucr2 = readl(sport->port.membase + UCR2); + writel(old_ucr2 & ~(UCR2_TXEN | UCR2_RXEN), sport->port.membase + UCR2); - old_txrxen &= (UCR2_TXEN | UCR2_RXEN); + old_ucr2 &= (UCR2_TXEN | UCR2_RXEN | UCR2_ATEN); /* custom-baudrate handling */ div = sport->port.uartclk / (baud * 16); @@ -1432,7 +1445,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, writel(old_ucr1, sport->port.membase + UCR1); /* set the parity, stop bits and data size */ - writel(ucr2 | old_txrxen, sport->port.membase + UCR2); + writel(ucr2 | old_ucr2, sport->port.membase + UCR2); if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) imx_enable_ms(&sport->port); |