diff options
Diffstat (limited to 'drivers/tty/serial/8250_pci.c')
| -rw-r--r-- | drivers/tty/serial/8250_pci.c | 196 |
1 files changed, 188 insertions, 8 deletions
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index f41b4259ecdd..3abeca2a2a1b 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -39,6 +39,7 @@ struct pci_serial_quirk { u32 device; u32 subvendor; u32 subdevice; + int (*probe)(struct pci_dev *dev); int (*init)(struct pci_dev *dev); int (*setup)(struct serial_private *, const struct pciserial_board *, @@ -56,6 +57,9 @@ struct serial_private { int line[0]; }; +static int pci_default_setup(struct serial_private*, + const struct pciserial_board*, struct uart_port*, int); + static void moan_device(const char *str, struct pci_dev *dev) { printk(KERN_WARNING @@ -571,6 +575,28 @@ static const struct timedia_struct { { 8, timedia_eight_port } }; +/* + * There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of + * listing them individually, this driver merely grabs them all with + * PCI_ANY_ID. Some of these devices, however, also feature a parallel port, + * and should be left free to be claimed by parport_serial instead. + */ +static int pci_timedia_probe(struct pci_dev *dev) +{ + /* + * Check the third digit of the subdevice ID + * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel) + */ + if ((dev->subsystem_device & 0x00f0) >= 0x70) { + dev_info(&dev->dev, + "ignoring Timedia subdevice %04x for parport_serial\n", + dev->subsystem_device); + return -ENODEV; + } + + return 0; +} + static int pci_timedia_init(struct pci_dev *dev) { const unsigned short *ids; @@ -743,7 +769,7 @@ pci_ni8430_setup(struct serial_private *priv, len = pci_resource_len(priv->dev, bar); p = ioremap_nocache(base, len); - /* enable the transciever */ + /* enable the transceiver */ writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE, p + offset + NI8430_PORTCON); @@ -752,6 +778,62 @@ pci_ni8430_setup(struct serial_private *priv, return setup_port(priv, port, bar, offset, board->reg_shift); } +static int pci_netmos_9900_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar; + + if ((priv->dev->subsystem_device & 0xff00) == 0x3000) { + /* netmos apparently orders BARs by datasheet layout, so serial + * ports get BARs 0 and 3 (or 1 and 4 for memmapped) + */ + bar = 3 * idx; + + return setup_port(priv, port, bar, 0, board->reg_shift); + } else { + return pci_default_setup(priv, board, port, idx); + } +} + +/* the 99xx series comes with a range of device IDs and a variety + * of capabilities: + * + * 9900 has varying capabilities and can cascade to sub-controllers + * (cascading should be purely internal) + * 9904 is hardwired with 4 serial ports + * 9912 and 9922 are hardwired with 2 serial ports + */ +static int pci_netmos_9900_numports(struct pci_dev *dev) +{ + unsigned int c = dev->class; + unsigned int pi; + unsigned short sub_serports; + + pi = (c & 0xff); + + if (pi == 2) { + return 1; + } else if ((pi == 0) && + (dev->device == PCI_DEVICE_ID_NETMOS_9900)) { + /* two possibilities: 0x30ps encodes number of parallel and + * serial ports, or 0x1000 indicates *something*. This is not + * immediately obvious, since the 2s1p+4s configuration seems + * to offer all functionality on functions 0..2, while still + * advertising the same function 3 as the 4s+2s1p config. + */ + sub_serports = dev->subsystem_device & 0xf; + if (sub_serports > 0) { + return sub_serports; + } else { + printk(KERN_NOTICE "NetMos/Mostech serial driver ignoring port on ambiguous config.\n"); + return 0; + } + } + + moan_device("unknown NetMos/Mostech program interface", dev); + return 0; +} static int pci_netmos_init(struct pci_dev *dev) { @@ -761,12 +843,28 @@ static int pci_netmos_init(struct pci_dev *dev) if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) || (dev->device == PCI_DEVICE_ID_NETMOS_9865)) return 0; + if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && dev->subsystem_device == 0x0299) return 0; + switch (dev->device) { /* FALLTHROUGH on all */ + case PCI_DEVICE_ID_NETMOS_9904: + case PCI_DEVICE_ID_NETMOS_9912: + case PCI_DEVICE_ID_NETMOS_9922: + case PCI_DEVICE_ID_NETMOS_9900: + num_serial = pci_netmos_9900_numports(dev); + break; + + default: + if (num_serial == 0 ) { + moan_device("unknown NetMos/Mostech device", dev); + } + } + if (num_serial == 0) return -ENODEV; + return num_serial; } @@ -1396,6 +1494,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .device = PCI_DEVICE_ID_TIMEDIA_1889, .subvendor = PCI_VENDOR_ID_TIMEDIA, .subdevice = PCI_ANY_ID, + .probe = pci_timedia_probe, .init = pci_timedia_init, .setup = pci_timedia_setup, }, @@ -1426,7 +1525,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .init = pci_netmos_init, - .setup = pci_default_setup, + .setup = pci_netmos_9900_setup, }, /* * For Oxford Semiconductor Tornado based devices @@ -1500,11 +1599,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .device = 0x800D, .init = pci_eg20t_init, }, - { - .vendor = 0x10DB, - .device = 0x800D, - .init = pci_eg20t_init, - }, /* * Cronyx Omega PCI (PLX-chip based) */ @@ -1703,6 +1797,7 @@ enum pci_board_num_t { pbn_ADDIDATA_PCIe_8_3906250, pbn_ce4100_1_115200, pbn_omegapci, + pbn_NETMOS9900_2s_115200, }; /* @@ -2404,6 +2499,11 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 115200, .uart_offset = 0x200, }, + [pbn_NETMOS9900_2s_115200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 115200, + }, }; static const struct pci_device_id softmodem_blacklist[] = { @@ -2640,11 +2740,19 @@ EXPORT_SYMBOL_GPL(pciserial_resume_ports); static int __devinit pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) { + struct pci_serial_quirk *quirk; struct serial_private *priv; const struct pciserial_board *board; struct pciserial_board tmp; int rc; + quirk = find_quirk(dev); + if (quirk->probe) { + rc = quirk->probe(dev); + if (rc) + return rc; + } + if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n", ent->driver_data); @@ -2654,6 +2762,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) board = &pci_boards[ent->driver_data]; rc = pci_enable_device(dev); + pci_save_state(dev); if (rc) return rc; @@ -3885,8 +3994,29 @@ static struct pci_device_id serial_pci_tbl[] = { 0xA000, 0x1000, 0, 0, pbn_b0_1_115200 }, + /* the 9901 is a rebranded 9912 */ + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, + 0xA000, 0x3002, + 0, 0, pbn_NETMOS9900_2s_115200 }, + /* - * Best Connectivity PCI Multi I/O cards + * Best Connectivity and Rosewill PCI Multi I/O cards */ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, @@ -3894,6 +4024,10 @@ static struct pci_device_id serial_pci_tbl[] = { 0, 0, pbn_b0_1_115200 }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x3002, + 0, 0, pbn_b0_bt_2_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, 0xA000, 0x3004, 0, 0, pbn_b0_bt_4_115200 }, /* Intel CE4100 */ @@ -3927,6 +4061,51 @@ static struct pci_device_id serial_pci_tbl[] = { { 0, } }; +static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev, + pci_channel_state_t state) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + if (priv) + pciserial_suspend_ports(priv); + + pci_disable_device(dev); + + return PCI_ERS_RESULT_NEED_RESET; +} + +static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev) +{ + int rc; + + rc = pci_enable_device(dev); + + if (rc) + return PCI_ERS_RESULT_DISCONNECT; + + pci_restore_state(dev); + pci_save_state(dev); + + return PCI_ERS_RESULT_RECOVERED; +} + +static void serial8250_io_resume(struct pci_dev *dev) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + if (priv) + pciserial_resume_ports(priv); +} + +static struct pci_error_handlers serial8250_err_handler = { + .error_detected = serial8250_io_error_detected, + .slot_reset = serial8250_io_slot_reset, + .resume = serial8250_io_resume, +}; + static struct pci_driver serial_pci_driver = { .name = "serial", .probe = pciserial_init_one, @@ -3936,6 +4115,7 @@ static struct pci_driver serial_pci_driver = { .resume = pciserial_resume_one, #endif .id_table = serial_pci_tbl, + .err_handler = &serial8250_err_handler, }; static int __init serial8250_pci_init(void) |