diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-pci-o2micro.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-pci-o2micro.c | 321 |
1 files changed, 321 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c new file mode 100644 index 000000000000..f49666bcc52a --- /dev/null +++ b/drivers/mmc/host/sdhci-pci-o2micro.c @@ -0,0 +1,321 @@ +/* + * Copyright (C) 2013 BayHub Technology Ltd. + * + * Authors: Peter Guo <peter.guo@bayhubtech.com> + * Adam Lee <adam.lee@canonical.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/pci.h> + +#include "sdhci.h" +#include "sdhci-pci.h" +#include "sdhci-pci-o2micro.h" + +void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip) +{ + u32 scratch_32; + int ret; + /* Improve write performance for SD3.0 */ + ret = pci_read_config_dword(chip->pdev, O2_SD_DEV_CTRL, &scratch_32); + if (ret) + return; + scratch_32 &= ~((1 << 12) | (1 << 13) | (1 << 14)); + pci_write_config_dword(chip->pdev, O2_SD_DEV_CTRL, scratch_32); + + /* Enable Link abnormal reset generating Reset */ + ret = pci_read_config_dword(chip->pdev, O2_SD_MISC_REG5, &scratch_32); + if (ret) + return; + scratch_32 &= ~((1 << 19) | (1 << 11)); + scratch_32 |= (1 << 10); + pci_write_config_dword(chip->pdev, O2_SD_MISC_REG5, scratch_32); + + /* set card power over current protection */ + ret = pci_read_config_dword(chip->pdev, O2_SD_TEST_REG, &scratch_32); + if (ret) + return; + scratch_32 |= (1 << 4); + pci_write_config_dword(chip->pdev, O2_SD_TEST_REG, scratch_32); + + /* adjust the output delay for SD mode */ + pci_write_config_dword(chip->pdev, O2_SD_DELAY_CTRL, 0x00002492); + + /* Set the output voltage setting of Aux 1.2v LDO */ + ret = pci_read_config_dword(chip->pdev, O2_SD_LD0_CTRL, &scratch_32); + if (ret) + return; + scratch_32 &= ~(3 << 12); + pci_write_config_dword(chip->pdev, O2_SD_LD0_CTRL, scratch_32); + + /* Set Max power supply capability of SD host */ + ret = pci_read_config_dword(chip->pdev, O2_SD_CAP_REG0, &scratch_32); + if (ret) + return; + scratch_32 &= ~(0x01FE); + scratch_32 |= 0x00CC; + pci_write_config_dword(chip->pdev, O2_SD_CAP_REG0, scratch_32); + /* Set DLL Tuning Window */ + ret = pci_read_config_dword(chip->pdev, + O2_SD_TUNING_CTRL, &scratch_32); + if (ret) + return; + scratch_32 &= ~(0x000000FF); + scratch_32 |= 0x00000066; + pci_write_config_dword(chip->pdev, O2_SD_TUNING_CTRL, scratch_32); + + /* Set UHS2 T_EIDLE */ + ret = pci_read_config_dword(chip->pdev, + O2_SD_UHS2_L1_CTRL, &scratch_32); + if (ret) + return; + scratch_32 &= ~(0x000000FC); + scratch_32 |= 0x00000084; + pci_write_config_dword(chip->pdev, O2_SD_UHS2_L1_CTRL, scratch_32); + + /* Set UHS2 Termination */ + ret = pci_read_config_dword(chip->pdev, O2_SD_FUNC_REG3, &scratch_32); + if (ret) + return; + scratch_32 &= ~((1 << 21) | (1 << 30)); + + /* Set RTD3 function disabled */ + scratch_32 |= ((1 << 29) | (1 << 28)); + pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32); + + /* Set L1 Entrance Timer */ + ret = pci_read_config_dword(chip->pdev, O2_SD_CAPS, &scratch_32); + if (ret) + return; + scratch_32 &= ~(0xf0000000); + scratch_32 |= 0x30000000; + pci_write_config_dword(chip->pdev, O2_SD_CAPS, scratch_32); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_MISC_CTRL4, &scratch_32); + if (ret) + return; + scratch_32 &= ~(0x000f0000); + scratch_32 |= 0x00080000; + pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL4, scratch_32); +} +EXPORT_SYMBOL_GPL(sdhci_pci_o2_fujin2_pci_init); + +int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot) +{ + struct sdhci_pci_chip *chip; + struct sdhci_host *host; + u32 reg; + + chip = slot->chip; + host = slot->host; + switch (chip->pdev->device) { + case PCI_DEVICE_ID_O2_SDS0: + case PCI_DEVICE_ID_O2_SEABIRD0: + case PCI_DEVICE_ID_O2_SEABIRD1: + case PCI_DEVICE_ID_O2_SDS1: + case PCI_DEVICE_ID_O2_FUJIN2: + reg = sdhci_readl(host, O2_SD_VENDOR_SETTING); + if (reg & 0x1) + host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12; + + if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2) + break; + /* set dll watch dog timer */ + reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2); + reg |= (1 << 12); + sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2); + + break; + default: + break; + } + + return 0; +} +EXPORT_SYMBOL_GPL(sdhci_pci_o2_probe_slot); + +int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip) +{ + int ret; + u8 scratch; + u32 scratch_32; + + switch (chip->pdev->device) { + case PCI_DEVICE_ID_O2_8220: + case PCI_DEVICE_ID_O2_8221: + case PCI_DEVICE_ID_O2_8320: + case PCI_DEVICE_ID_O2_8321: + /* This extra setup is required due to broken ADMA. */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + + /* Set Multi 3 to VCC3V# */ + pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08); + + /* Disable CLK_REQ# support after media DET */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_CLKREQ, &scratch); + if (ret) + return ret; + scratch |= 0x20; + pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch); + + /* Choose capabilities, enable SDMA. We have to write 0x01 + * to the capabilities register first to unlock it. + */ + ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch); + if (ret) + return ret; + scratch |= 0x01; + pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch); + pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73); + + /* Disable ADMA1/2 */ + pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39); + pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08); + + /* Disable the infinite transfer mode */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_INF_MOD, &scratch); + if (ret) + return ret; + scratch |= 0x08; + pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch); + + /* Lock WP */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + break; + case PCI_DEVICE_ID_O2_SDS0: + case PCI_DEVICE_ID_O2_SDS1: + case PCI_DEVICE_ID_O2_FUJIN2: + /* UnLock WP */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + + scratch &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + + /* Set timeout CLK */ + ret = pci_read_config_dword(chip->pdev, + O2_SD_CLK_SETTING, &scratch_32); + if (ret) + return ret; + + scratch_32 &= ~(0xFF00); + scratch_32 |= 0x07E0C800; + pci_write_config_dword(chip->pdev, + O2_SD_CLK_SETTING, scratch_32); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_CLKREQ, &scratch_32); + if (ret) + return ret; + scratch_32 |= 0x3; + pci_write_config_dword(chip->pdev, O2_SD_CLKREQ, scratch_32); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_PLL_SETTING, &scratch_32); + if (ret) + return ret; + + scratch_32 &= ~(0x1F3F070E); + scratch_32 |= 0x18270106; + pci_write_config_dword(chip->pdev, + O2_SD_PLL_SETTING, scratch_32); + + /* Disable UHS1 funciton */ + ret = pci_read_config_dword(chip->pdev, + O2_SD_CAP_REG2, &scratch_32); + if (ret) + return ret; + scratch_32 &= ~(0xE0); + pci_write_config_dword(chip->pdev, + O2_SD_CAP_REG2, scratch_32); + + if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) + sdhci_pci_o2_fujin2_pci_init(chip); + + /* Lock WP */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + break; + case PCI_DEVICE_ID_O2_SEABIRD0: + case PCI_DEVICE_ID_O2_SEABIRD1: + /* UnLock WP */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + + scratch &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_FUNC_REG0, &scratch_32); + + if ((scratch_32 & 0xff000000) == 0x01000000) { + scratch_32 &= 0x0000FFFF; + scratch_32 |= 0x1F340000; + + pci_write_config_dword(chip->pdev, + O2_SD_PLL_SETTING, scratch_32); + } else { + scratch_32 &= 0x0000FFFF; + scratch_32 |= 0x2c280000; + + pci_write_config_dword(chip->pdev, + O2_SD_PLL_SETTING, scratch_32); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_FUNC_REG4, + &scratch_32); + scratch_32 |= (1 << 22); + pci_write_config_dword(chip->pdev, + O2_SD_FUNC_REG4, scratch_32); + } + + /* Lock WP */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + break; + } + + return 0; +} +EXPORT_SYMBOL_GPL(sdhci_pci_o2_probe); + +int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip) +{ + sdhci_pci_o2_probe(chip); + return 0; +} +EXPORT_SYMBOL_GPL(sdhci_pci_o2_resume); |