diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-pci-o2micro.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-pci-o2micro.c | 211 |
1 files changed, 175 insertions, 36 deletions
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c index 620f52ad9667..7bfee28116af 100644 --- a/drivers/mmc/host/sdhci-pci-o2micro.c +++ b/drivers/mmc/host/sdhci-pci-o2micro.c @@ -21,6 +21,7 @@ * O2Micro device registers */ +#define O2_SD_PCIE_SWITCH 0x54 #define O2_SD_MISC_REG5 0x64 #define O2_SD_LD0_CTRL 0x68 #define O2_SD_DEV_CTRL 0x88 @@ -36,6 +37,7 @@ #define O2_SD_INF_MOD 0xF1 #define O2_SD_MISC_CTRL4 0xFC #define O2_SD_MISC_CTRL 0x1C0 +#define O2_SD_EXP_INT_REG 0x1E0 #define O2_SD_PWR_FORCE_L0 0x0002 #define O2_SD_TUNING_CTRL 0x300 #define O2_SD_PLL_SETTING 0x304 @@ -49,6 +51,9 @@ #define O2_SD_UHS2_L1_CTRL 0x35C #define O2_SD_FUNC_REG3 0x3E0 #define O2_SD_FUNC_REG4 0x3E4 +#define O2_SD_PARA_SET_REG1 0x444 +#define O2_SD_VDDX_CTRL_REG 0x508 +#define O2_SD_GPIO_CTRL_REG1 0x510 #define O2_SD_LED_ENABLE BIT(6) #define O2_SD_FREG0_LEDOFF BIT(13) #define O2_SD_SEL_DLL BIT(16) @@ -334,33 +339,45 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode) scratch |= O2_SD_PWR_FORCE_L0; sdhci_writew(host, scratch, O2_SD_MISC_CTRL); - /* Stop clk */ - reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL); - reg_val &= ~SDHCI_CLOCK_CARD_EN; - sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL); - - if ((host->timing == MMC_TIMING_MMC_HS200) || - (host->timing == MMC_TIMING_UHS_SDR104)) { - /* UnLock WP */ - pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8); - scratch_8 &= 0x7f; - pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8); - - /* Set pcr 0x354[16] to choose dll clock, and set the default phase */ - pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, ®_val); - reg_val &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK); - reg_val |= (O2_SD_SEL_DLL | O2_SD_FIX_PHASE); - pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, reg_val); + /* Update output phase */ + switch (chip->pdev->device) { + case PCI_DEVICE_ID_O2_SDS0: + case PCI_DEVICE_ID_O2_SEABIRD0: + case PCI_DEVICE_ID_O2_SEABIRD1: + case PCI_DEVICE_ID_O2_SDS1: + case PCI_DEVICE_ID_O2_FUJIN2: + /* Stop clk */ + reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + reg_val &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL); + + if (host->timing == MMC_TIMING_MMC_HS200 || + host->timing == MMC_TIMING_UHS_SDR104) { + /* UnLock WP */ + pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8); + scratch_8 &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8); + + /* Set pcr 0x354[16] to choose dll clock, and set the default phase */ + pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, ®_val); + reg_val &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK); + reg_val |= (O2_SD_SEL_DLL | O2_SD_FIX_PHASE); + pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, reg_val); + + /* Lock WP */ + pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8); + scratch_8 |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8); + } - /* Lock WP */ - pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8); - scratch_8 |= 0x80; - pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8); + /* Start clk */ + reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + reg_val |= SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL); + break; + default: + break; } - /* Start clk */ - reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL); - reg_val |= SDHCI_CLOCK_CARD_EN; - sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL); /* wait DLL lock, timeout value 5ms */ if (readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host, @@ -563,6 +580,7 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock) u16 clk; u8 scratch; u32 scratch_32; + u32 dmdn_208m, dmdn_200m; struct sdhci_pci_slot *slot = sdhci_priv(host); struct sdhci_pci_chip *chip = slot->chip; @@ -578,16 +596,27 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock) scratch &= 0x7f; pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + if (chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9860 || + chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9861 || + chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9862 || + chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9863) { + dmdn_208m = 0x2c500000; + dmdn_200m = 0x25200000; + } else { + dmdn_208m = 0x2c280000; + dmdn_200m = 0x25100000; + } + if ((host->timing == MMC_TIMING_UHS_SDR104) && (clock == 200000000)) { pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32); - if ((scratch_32 & 0xFFFF0000) != 0x2c280000) - o2_pci_set_baseclk(chip, 0x2c280000); + if ((scratch_32 & 0xFFFF0000) != dmdn_208m) + o2_pci_set_baseclk(chip, dmdn_208m); } else { pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32); - if ((scratch_32 & 0xFFFF0000) != 0x25100000) - o2_pci_set_baseclk(chip, 0x25100000); + if ((scratch_32 & 0xFFFF0000) != dmdn_200m) + o2_pci_set_baseclk(chip, dmdn_200m); } pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32); @@ -603,6 +632,67 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock) sdhci_o2_enable_clk(host, clk); } +static int sdhci_pci_o2_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pci_slot *slot = sdhci_priv(host); + struct sdhci_pci_chip *chip = slot->chip; + u8 scratch8; + u16 scratch16; + int ret; + + /* Disable clock */ + sdhci_writeb(host, 0, SDHCI_CLOCK_CONTROL); + + /* Set VDD2 voltage*/ + scratch8 = sdhci_readb(host, SDHCI_POWER_CONTROL); + scratch8 &= 0x0F; + if (host->mmc->ios.timing == MMC_TIMING_SD_EXP_1_2V && + host->mmc->caps2 & MMC_CAP2_SD_EXP_1_2V) { + scratch8 |= SDHCI_VDD2_POWER_ON | SDHCI_VDD2_POWER_120; + } else { + scratch8 |= SDHCI_VDD2_POWER_ON | SDHCI_VDD2_POWER_180; + } + + sdhci_writeb(host, scratch8, SDHCI_POWER_CONTROL); + + /* UnLock WP */ + pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch8); + scratch8 &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch8); + + /* Wait for express card clkreqn assert */ + ret = read_poll_timeout(sdhci_readb, scratch8, !(scratch8 & BIT(0)), + 1, 30000, false, host, O2_SD_EXP_INT_REG); + + if (!ret) { + /* Switch to PCIe mode */ + scratch16 = sdhci_readw(host, O2_SD_PCIE_SWITCH); + scratch16 |= BIT(8); + sdhci_writew(host, scratch16, O2_SD_PCIE_SWITCH); + } else { + /* Power off VDD2 voltage*/ + scratch8 = sdhci_readb(host, SDHCI_POWER_CONTROL); + scratch8 &= 0x0F; + sdhci_writeb(host, scratch8, SDHCI_POWER_CONTROL); + + /* Keep mode as UHSI */ + pci_read_config_word(chip->pdev, O2_SD_PARA_SET_REG1, &scratch16); + scratch16 &= ~BIT(11); + pci_write_config_word(chip->pdev, O2_SD_PARA_SET_REG1, scratch16); + + host->mmc->ios.timing = MMC_TIMING_LEGACY; + pr_info("%s: Express card initialization failed, falling back to Legacy\n", + mmc_hostname(host->mmc)); + } + /* Lock WP */ + pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch8); + scratch8 |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch8); + + return 0; +} + static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot) { struct sdhci_pci_chip *chip; @@ -624,6 +714,11 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot) if (caps & SDHCI_CAN_DO_8BIT) host->mmc->caps |= MMC_CAP_8_BIT_DATA; + host->quirks2 |= SDHCI_QUIRK2_BROKEN_DDR50; + + sdhci_pci_o2_enable_msi(chip, host); + + host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning; switch (chip->pdev->device) { case PCI_DEVICE_ID_O2_SDS0: case PCI_DEVICE_ID_O2_SEABIRD0: @@ -634,10 +729,6 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot) if (reg & 0x1) host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12; - host->quirks2 |= SDHCI_QUIRK2_BROKEN_DDR50; - - sdhci_pci_o2_enable_msi(chip, host); - if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD0) { ret = pci_read_config_dword(chip->pdev, O2_SD_MISC_SETTING, ®); @@ -663,15 +754,22 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot) host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; } - host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning; - if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2) break; /* set dll watch dog timer */ reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2); reg |= (1 << 12); sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2); - + break; + case PCI_DEVICE_ID_O2_GG8_9860: + case PCI_DEVICE_ID_O2_GG8_9861: + case PCI_DEVICE_ID_O2_GG8_9862: + case PCI_DEVICE_ID_O2_GG8_9863: + host->mmc->caps2 |= MMC_CAP2_NO_SDIO | MMC_CAP2_SD_EXP | MMC_CAP2_SD_EXP_1_2V; + host->mmc->caps |= MMC_CAP_HW_RESET; + host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; + slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd; + host->mmc_host_ops.init_sd_express = sdhci_pci_o2_init_sd_express; break; default: break; @@ -684,6 +782,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip) { int ret; u8 scratch; + u16 scratch16; u32 scratch_32; switch (chip->pdev->device) { @@ -893,6 +992,46 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip) scratch |= 0x80; pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); break; + case PCI_DEVICE_ID_O2_GG8_9860: + case PCI_DEVICE_ID_O2_GG8_9861: + case PCI_DEVICE_ID_O2_GG8_9862: + case PCI_DEVICE_ID_O2_GG8_9863: + /* UnLock WP */ + ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + + /* Select mode switch source as software control */ + pci_read_config_word(chip->pdev, O2_SD_PARA_SET_REG1, &scratch16); + scratch16 &= 0xF8FF; + scratch16 |= BIT(9); + pci_write_config_word(chip->pdev, O2_SD_PARA_SET_REG1, scratch16); + + /* set VDD1 supply source */ + pci_read_config_word(chip->pdev, O2_SD_VDDX_CTRL_REG, &scratch16); + scratch16 &= 0xFFE3; + scratch16 |= BIT(3); + pci_write_config_word(chip->pdev, O2_SD_VDDX_CTRL_REG, scratch16); + + /* Set host drive strength*/ + scratch16 = 0x0025; + pci_write_config_word(chip->pdev, O2_SD_PLL_SETTING, scratch16); + + /* Set output delay*/ + pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32); + scratch_32 &= 0xFF0FFF00; + scratch_32 |= 0x00B0003B; + pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, scratch_32); + + /* Lock WP */ + ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + break; } return 0; |