diff options
Diffstat (limited to 'arch/arm/boot')
69 files changed, 1252 insertions, 237 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 066b03480b63..3a8b32df6b31 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -60,11 +60,6 @@ add \rb, \rb, #0x00010000 @ Ser1 #endif .endm -#elif defined(CONFIG_ARCH_S3C24XX) - .macro loadsp, rb, tmp - mov \rb, #0x50000000 - add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT - .endm #else .macro loadsp, rb, tmp addruart \rb, \tmp diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cbe223c882d9..5986ff63b901 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -50,6 +50,7 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb +dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ @@ -320,9 +321,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb -dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \ - r7s72100-genmai.dtb \ - r7s72100-genmai-reference.dtb \ +dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7778-bockw-reference.dtb \ @@ -337,7 +336,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \ r8a73a4-ape6evm-reference.dtb \ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ - r7s72100-genmai-reference.dtb \ + r7s72100-genmai.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ r8a7790-lager.dtb diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 6b71ad95a5cf..305975d3f531 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -26,7 +26,6 @@ pinctrl-0 = <&emmc_pins>; bus-width = <8>; status = "okay"; - ti,vcc-aux-disable-is-sleep; }; &am33xx_pinmux { diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 0fb5df4ad498..586397cf6e9c 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -144,7 +144,7 @@ compatible = "ti,edma3"; ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; reg = <0x49000000 0x10000>, - <0x44e10f90 0x10>; + <0x44e10f90 0x40>; interrupts = <12 13 14>; #dma-cells = <1>; dma-channels = <64>; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index 788391f91684..5a452fdd7c5d 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -62,5 +62,21 @@ }; }; +&iva { + status = "disabled"; +}; + +&mailbox { + status = "disabled"; +}; + +&mmu_isp { + status = "disabled"; +}; + +&smartreflex_mpu_iva { + status = "disabled"; +}; + /include/ "am35xx-clocks.dtsi" /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 1f852086d9b5..1704e853f163 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -67,11 +67,15 @@ }; ocp { - compatible = "simple-bus"; + compatible = "ti,am4372-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; ti,hwmods = "l3_main"; + reg = <0x44000000 0x400000 + 0x44800000 0x400000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; prcm: prcm@44df0000 { compatible = "ti,am4-prcm"; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index f432685957b8..c25d15837ce9 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -221,6 +221,11 @@ status = "okay"; }; +&gpio5 { + status = "okay"; + ti,no-reset-on-init; +}; + &mmc1 { status = "okay"; vmmc-supply = <&vmmcsd_fixed>; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index ba1a43118f8f..416f4e5a69c1 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -66,6 +66,7 @@ i2c@11000 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; + clock-frequency = <100000>; status = "okay"; audio_codec: audio-codec@4a { compatible = "cirrus,cs42l51"; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index eb90b83d7d38..772fec2d26ce 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -78,6 +78,11 @@ }; }; + sata@a0000 { + status = "okay"; + nr-ports = <2>; + }; + nand: nand@d0000 { pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index aa71718b549d..e69bc6759c39 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -101,7 +101,7 @@ pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; + reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index 2c7990d6efa2..f011009bf4cf 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -112,7 +112,7 @@ pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; + reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; @@ -133,7 +133,7 @@ pcie@4,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; - reg = <0x1000 0 0 0 0>; + reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 2b598ef32285..42ddb2864365 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -49,7 +49,7 @@ /* Device Bus parameters are required */ /* Read parameters */ - devbus,bus-width = <8>; + devbus,bus-width = <16>; devbus,turn-off-ps = <60000>; devbus,badr-skew-ps = <0>; devbus,acc-first-ps = <124000>; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index eb0013f000b0..0478c55ca656 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -59,7 +59,7 @@ /* Device Bus parameters are required */ /* Read parameters */ - devbus,bus-width = <8>; + devbus,bus-width = <16>; devbus,turn-off-ps = <60000>; devbus,badr-skew-ps = <0>; devbus,acc-first-ps = <124000>; @@ -142,22 +142,22 @@ ethernet@70000 { status = "okay"; phy = <&phy0>; - phy-mode = "rgmii-id"; + phy-mode = "qsgmii"; }; ethernet@74000 { status = "okay"; phy = <&phy1>; - phy-mode = "rgmii-id"; + phy-mode = "qsgmii"; }; ethernet@30000 { status = "okay"; phy = <&phy2>; - phy-mode = "rgmii-id"; + phy-mode = "qsgmii"; }; ethernet@34000 { status = "okay"; phy = <&phy3>; - phy-mode = "rgmii-id"; + phy-mode = "qsgmii"; }; /* Front-side USB slot */ diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index cf26d1313d5f..e5c6a0492ca0 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -39,7 +39,7 @@ /* Device Bus parameters are required */ /* Read parameters */ - devbus,bus-width = <8>; + devbus,bus-width = <16>; devbus,turn-off-ps = <60000>; devbus,badr-skew-ps = <0>; devbus,acc-first-ps = <124000>; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 366fc2cbcd64..c0e0eae16a27 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -641,7 +641,7 @@ trigger@3 { reg = <3>; trigger-name = "external"; - trigger-value = <0x13>; + trigger-value = <0xd>; trigger-external; }; }; diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 6684d557daad..bb22842a0826 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -203,6 +203,7 @@ compatible = "sirf,prima2-tick"; reg = <0xb0020000 0x1000>; interrupts = <0>; + clocks = <&clks 11>; }; nand@b0030000 { diff --git a/arch/arm/boot/dts/axm5516-amarillo.dts b/arch/arm/boot/dts/axm5516-amarillo.dts new file mode 100644 index 000000000000..a9d60471d9ff --- /dev/null +++ b/arch/arm/boot/dts/axm5516-amarillo.dts @@ -0,0 +1,51 @@ +/* + * arch/arm/boot/dts/axm5516-amarillo.dts + * + * Copyright (C) 2013 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; + +/memreserve/ 0x00000000 0x00400000; + +#include "axm55xx.dtsi" +#include "axm5516-cpus.dtsi" + +/ { + model = "Amarillo AXM5516"; + compatible = "lsi,axm5516-amarillo", "lsi,axm5516"; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0x02 0x00000000>; + }; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/axm5516-cpus.dtsi new file mode 100644 index 000000000000..b85f360cb125 --- /dev/null +++ b/arch/arm/boot/dts/axm5516-cpus.dtsi @@ -0,0 +1,204 @@ +/* + * arch/arm/boot/dts/axm5516-cpus.dtsi + * + * Copyright (C) 2013 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + }; + cluster1 { + core0 { + cpu = <&CPU4>; + }; + core1 { + cpu = <&CPU5>; + }; + core2 { + cpu = <&CPU6>; + }; + core3 { + cpu = <&CPU7>; + }; + }; + cluster2 { + core0 { + cpu = <&CPU8>; + }; + core1 { + cpu = <&CPU9>; + }; + core2 { + cpu = <&CPU10>; + }; + core3 { + cpu = <&CPU11>; + }; + }; + cluster3 { + core0 { + cpu = <&CPU12>; + }; + core1 { + cpu = <&CPU13>; + }; + core2 { + cpu = <&CPU14>; + }; + core3 { + cpu = <&CPU15>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x00>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x01>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x02>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x03>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x100>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x101>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x102>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x103>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU8: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x200>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU9: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x201>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU10: cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x202>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU11: cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x203>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU12: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x300>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU13: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x301>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU14: cpu@302 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x302>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU15: cpu@303 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x303>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + }; +}; diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi new file mode 100644 index 000000000000..ea288f0a1d39 --- /dev/null +++ b/arch/arm/boot/dts/axm55xx.dtsi @@ -0,0 +1,204 @@ +/* + * arch/arm/boot/dts/axm55xx.dtsi + * + * Copyright (C) 2013 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/lsi,axm5516-clks.h> + +#include "skeleton64.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + timer = &timer0; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clk_ref0: clk_ref0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clk_ref1: clk_ref1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clk_ref2: clk_ref2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clks: clock-controller@2010020000 { + compatible = "lsi,axm5516-clks"; + #clock-cells = <1>; + reg = <0x20 0x10020000 0 0x20000>; + }; + }; + + gic: interrupt-controller@2001001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x20 0x01001000 0 0x1000>, + <0x20 0x01002000 0 0x1000>, + <0x20 0x01004000 0 0x2000>, + <0x20 0x01006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = + <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + compatible = "simple-bus"; + device_type = "soc"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + ranges; + + syscon: syscon@2010030000 { + compatible = "lsi,axxia-syscon", "syscon"; + reg = <0x20 0x10030000 0 0x2000>; + }; + + reset: reset@2010031000 { + compatible = "lsi,axm55xx-reset"; + syscon = <&syscon>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + serial0: uart@2010080000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10080000 0 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + serial1: uart@2010081000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10081000 0 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + serial2: uart@2010082000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10082000 0 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + serial3: uart@2010083000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10083000 0 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + timer0: timer@2010091000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x20 0x10091000 0 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "okay"; + }; + + gpio0: gpio@2010092000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x20 0x10092000 0x00 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio1: gpio@2010093000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x20 0x10093000 0x00 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + }; + }; +}; + +/* + Local Variables: + mode: C + End: +*/ diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index a8a0ceec6775..c29945e07c5a 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -72,13 +72,13 @@ * hierarchy. */ ocp { - compatible = "ti,omap4-l3-noc", "simple-bus"; + compatible = "ti,dra7-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; ti,hwmods = "l3_main_1", "l3_main_2"; - reg = <0x44000000 0x2000>, - <0x44800000 0x3000>; + reg = <0x44000000 0x1000000>, + <0x45000000 0x1000>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 106a7057bcaf..77878447b312 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -564,7 +564,7 @@ status = "okay"; ak8975@0c { - compatible = "ak,ak8975"; + compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 0>; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 1f5afb39355f..d0de1f50d15b 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -108,6 +108,7 @@ regulator-name = "VDD_IOPERI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; op_mode = <1>; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 3a89cfbd6a87..e38532271ef9 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -60,6 +60,7 @@ compatible = "arm,cortex-a15"; reg = <0x0>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu1: cpu@1 { @@ -67,6 +68,7 @@ compatible = "arm,cortex-a15"; reg = <0x1>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu2: cpu@2 { @@ -74,6 +76,7 @@ compatible = "arm,cortex-a15"; reg = <0x2>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu3: cpu@3 { @@ -81,6 +84,7 @@ compatible = "arm,cortex-a15"; reg = <0x3>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu4: cpu@100 { @@ -88,6 +92,7 @@ compatible = "arm,cortex-a7"; reg = <0x100>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; }; cpu5: cpu@101 { @@ -95,6 +100,7 @@ compatible = "arm,cortex-a7"; reg = <0x101>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; }; cpu6: cpu@102 { @@ -102,6 +108,7 @@ compatible = "arm,cortex-a7"; reg = <0x102>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; }; cpu7: cpu@103 { @@ -109,6 +116,26 @@ compatible = "arm,cortex-a7"; reg = <0x103>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + }; + }; + + cci@10d20000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10d20000 0x1000>; + ranges = <0x0 0x10d20000 0x6000>; + + cci_control0: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + cci_control1: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; }; }; @@ -403,7 +430,7 @@ spi_0: spi@12d20000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; - interrupts = <0 66 0>; + interrupts = <0 68 0>; dmas = <&pdma0 5 &pdma0 4>; dma-names = "tx", "rx"; @@ -419,7 +446,7 @@ spi_1: spi@12d30000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d30000 0x100>; - interrupts = <0 67 0>; + interrupts = <0 69 0>; dmas = <&pdma1 5 &pdma1 4>; dma-names = "tx", "rx"; @@ -435,7 +462,7 @@ spi_2: spi@12d40000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d40000 0x100>; - interrupts = <0 68 0>; + interrupts = <0 70 0>; dmas = <&pdma0 7 &pdma0 6>; dma-names = "tx", "rx"; @@ -567,7 +594,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c4_hs_bus>; - clocks = <&clock CLK_I2C4>; + clocks = <&clock CLK_USI0>; clock-names = "hsi2c"; status = "disabled"; }; @@ -580,7 +607,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c5_hs_bus>; - clocks = <&clock CLK_I2C5>; + clocks = <&clock CLK_USI1>; clock-names = "hsi2c"; status = "disabled"; }; @@ -593,7 +620,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c6_hs_bus>; - clocks = <&clock CLK_I2C6>; + clocks = <&clock CLK_USI2>; clock-names = "hsi2c"; status = "disabled"; }; @@ -606,7 +633,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c7_hs_bus>; - clocks = <&clock CLK_I2C7>; + clocks = <&clock CLK_USI3>; clock-names = "hsi2c"; status = "disabled"; }; @@ -619,7 +646,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c8_hs_bus>; - clocks = <&clock CLK_I2C8>; + clocks = <&clock CLK_USI4>; clock-names = "hsi2c"; status = "disabled"; }; @@ -632,7 +659,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c9_hs_bus>; - clocks = <&clock CLK_I2C9>; + clocks = <&clock CLK_USI5>; clock-names = "hsi2c"; status = "disabled"; }; @@ -645,7 +672,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c10_hs_bus>; - clocks = <&clock CLK_I2C10>; + clocks = <&clock CLK_USI6>; clock-names = "hsi2c"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index 3f2400b8560b..3e3f17aa93a1 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -248,7 +248,7 @@ &tve { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_vga_sync_1>; - i2c-ddc-bus = <&i2c3>; + ddc-i2c-bus = <&i2c3>; fsl,tve-mode = "vga"; fsl,hsync-pin = <4>; fsl,vsync-pin = <6>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 375e66fad578..6456a0084388 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -116,7 +116,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-ipu"; - reg = <0x18000000 0x080000000>; + reg = <0x18000000 0x08000000>; interrupts = <11 10>; clocks = <&clks IMX5_CLK_IPU_GATE>, <&clks IMX5_CLK_IPU_DI0_GATE>, diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index 49f9295c7bac..8f76d28759a3 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -31,6 +31,16 @@ stdout-path = &uart0; }; + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pin-controller@10000 { pmx_usb_led: pmx-usb-led { @@ -69,14 +79,6 @@ ehci@50000 { status = "okay"; }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi index 9cb083b72404..2075a2e828f1 100644 --- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi @@ -4,6 +4,16 @@ / { model = "ZyXEL NSA310"; + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pin-controller@10000 { @@ -51,14 +61,6 @@ status = "okay"; nr-ports = <2>; }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio_poweroff { diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi index f577b7df9a29..521c587acaee 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -24,11 +24,10 @@ compatible = "smsc,lan9221", "smsc,lan9115"; bank-width = <2>; gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; + gpmc,cs-on-ns = <1>; + gpmc,cs-rd-off-ns = <180>; + gpmc,cs-wr-off-ns = <180>; + gpmc,adv-rd-off-ns = <18>; gpmc,adv-wr-off-ns = <48>; gpmc,oe-on-ns = <54>; gpmc,oe-off-ns = <168>; @@ -36,12 +35,10 @@ gpmc,we-off-ns = <168>; gpmc,rd-cycle-ns = <186>; gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; + gpmc,access-ns = <144>; + gpmc,page-burst-access-ns = <24>; + gpmc,bus-turnaround-ns = <90>; + gpmc,cycle2cycle-delay-ns = <90>; gpmc,cycle2cycle-samecsen; gpmc,cycle2cycle-diffcsen; vddvario-supply = <&vddvario>; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 22f35ea142c1..8f8c07da4ac1 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -71,13 +71,6 @@ interrupts = <58>; }; - mailbox: mailbox@48094000 { - compatible = "ti,omap2-mailbox"; - ti,hwmods = "mailbox"; - reg = <0x48094000 0x200>; - interrupts = <26>; - }; - intc: interrupt-controller@1 { compatible = "ti,omap2-intc"; interrupt-controller; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index db0f1293579c..e83b0468080c 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -151,6 +151,14 @@ dma-names = "tx", "rx"; }; + mailbox: mailbox@48094000 { + compatible = "ti,omap2-mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>, <34>; + interrupt-names = "dsp", "iva"; + ti,hwmods = "mailbox"; + }; + timer1: timer@48028000 { compatible = "ti,omap2420-timer"; reg = <0x48028000 0x400>; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 8ff8d15184ad..c4e8013801ee 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -242,6 +242,13 @@ dma-names = "tx", "rx"; }; + mailbox: mailbox@48094000 { + compatible = "ti,omap2-mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>; + ti,hwmods = "mailbox"; + }; + timer1: timer@49018000 { compatible = "ti,omap2420-timer"; reg = <0x49018000 0x400>; diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi index d00055809e31..25ba08331d88 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi @@ -10,18 +10,6 @@ cpu0-supply = <&vcc>; }; }; - - vddvario: regulator-vddvario { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; - }; - - vdd33a: regulator-vdd33a { - compatible = "regulator-fixed"; - regulator-name = "vdd33a"; - regulator-always-on; - }; }; &omap3_pmx_core { @@ -35,58 +23,34 @@ hsusb0_pins: pinmux_hsusb0_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ - OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ - OMAP3_CORE1_IOPAD(0x21a4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ - OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ - OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */ - OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ - OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ - OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */ - OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */ - OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */ - OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */ - OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ + OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ + OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ + OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ + OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ + OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */ + OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ + OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ + OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */ + OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */ + OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */ + OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */ + OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ >; }; }; +#include "omap-gpmc-smsc911x.dtsi" + &gpmc { ranges = <5 0 0x2c000000 0x01000000>; - smsc1: ethernet@5,0 { + smsc1: ethernet@gpmc { compatible = "smsc,lan9221", "smsc,lan9115"; pinctrl-names = "default"; pinctrl-0 = <&smsc1_pins>; interrupt-parent = <&gpio6>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; reg = <5 0 0xff>; - bank-width = <2>; - gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; - vddvario-supply = <&vddvario>; - vdd33a-supply = <&vdd33a>; - reg-io-width = <4>; - smsc,save-mac-address; }; }; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 4df68ad3736a..9cba94bed7ad 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -89,7 +89,16 @@ status = "disabled"; }; +&uart1 { + interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; +}; + +&uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; +}; + &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index b97736d98a64..e2d163bf0619 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -107,7 +107,7 @@ >; }; - smsc911x_pins: pinmux_smsc911x_pins { + smsc9221_pins: pinmux_smsc9221_pins { pinctrl-single,pins = < 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ >; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 7abd64f6ae21..b22caaaf774b 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -10,7 +10,7 @@ */ #include "omap3-igep.dtsi" -#include "omap-gpmc-smsc911x.dtsi" +#include "omap-gpmc-smsc9221.dtsi" / { model = "IGEPv2 (TI OMAP AM/DM37x)"; @@ -248,7 +248,7 @@ ethernet@gpmc { pinctrl-names = "default"; - pinctrl-0 = <&smsc911x_pins>; + pinctrl-0 = <&smsc9221_pins>; reg = <5 0 0xff>; interrupt-parent = <&gpio6>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 0abe986a4ecc..476ff158ddb3 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -234,6 +234,10 @@ }; }; +&uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; +}; + &usb_otg_hs { pinctrl-names = "default"; pinctrl-0 = <&musb_pins>; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index a289910ec362..059a8ff1e6ac 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -22,6 +22,17 @@ }; }; + leds { + compatible = "gpio-leds"; + heartbeat { + label = "debug::sleep"; + gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */ + linux,default-trigger = "default-on"; + pinctrl-names = "default"; + pinctrl-0 = <&debug_leds>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ @@ -144,6 +155,12 @@ >; }; + debug_leds: pinmux_debug_led_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */ + >; + }; + mcspi4_pins: pinmux_mcspi4_pins { pinctrl-single,pins = < 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ @@ -696,11 +713,13 @@ }; &uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index 7909c51b05a5..d59e3de1441e 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -2,20 +2,6 @@ * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730 */ -/ { - vddvario_sb_t35: regulator-vddvario-sb-t35 { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; - }; - - vdd33a_sb_t35: regulator-vdd33a-sb-t35 { - compatible = "regulator-fixed"; - regulator-name = "vdd33a"; - regulator-always-on; - }; -}; - &omap3_pmx_core { smsc2_pins: pinmux_smsc2_pins { pinctrl-single,pins = < @@ -37,11 +23,10 @@ reg = <4 0 0xff>; bank-width = <2>; gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; + gpmc,cs-on-ns = <1>; + gpmc,cs-rd-off-ns = <180>; + gpmc,cs-wr-off-ns = <180>; + gpmc,adv-rd-off-ns = <18>; gpmc,adv-wr-off-ns = <48>; gpmc,oe-on-ns = <54>; gpmc,oe-off-ns = <168>; @@ -49,16 +34,14 @@ gpmc,we-off-ns = <168>; gpmc,rd-cycle-ns = <186>; gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; + gpmc,access-ns = <144>; + gpmc,page-burst-access-ns = <24>; + gpmc,bus-turnaround-ns = <90>; + gpmc,cycle2cycle-delay-ns = <90>; gpmc,cycle2cycle-samecsen; gpmc,cycle2cycle-diffcsen; - vddvario-supply = <&vddvario_sb_t35>; - vdd33a-supply = <&vdd33a_sb_t35>; + vddvario-supply = <&vddvario>; + vdd33a-supply = <&vdd33a>; reg-io-width = <4>; smsc,save-mac-address; }; diff --git a/arch/arm/boot/dts/omap3-sbc-t3517.dts b/arch/arm/boot/dts/omap3-sbc-t3517.dts index 024c9c6c682d..42189b65d393 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3517.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3517.dts @@ -8,6 +8,19 @@ / { model = "CompuLab SBC-T3517 with CM-T3517"; compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3"; + + /* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */ + vddvario: regulator-vddvario-sb-t35 { + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; + }; + + vdd33a: regulator-vdd33a-sb-t35 { + compatible = "regulator-fixed"; + regulator-name = "vdd33a"; + regulator-always-on; + }; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index b8cd2d78347b..b2891a9a6975 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -61,7 +61,7 @@ ti,hwmods = "mpu"; }; - iva { + iva: iva { compatible = "ti,iva2.2"; ti,hwmods = "iva"; @@ -267,7 +267,7 @@ uart1: serial@4806a000 { compatible = "ti,omap3-uart"; reg = <0x4806a000 0x2000>; - interrupts = <72>; + interrupts-extended = <&intc 72>; dmas = <&sdma 49 &sdma 50>; dma-names = "tx", "rx"; ti,hwmods = "uart1"; @@ -277,7 +277,7 @@ uart2: serial@4806c000 { compatible = "ti,omap3-uart"; reg = <0x4806c000 0x400>; - interrupts = <73>; + interrupts-extended = <&intc 73>; dmas = <&sdma 51 &sdma 52>; dma-names = "tx", "rx"; ti,hwmods = "uart2"; @@ -287,7 +287,7 @@ uart3: serial@49020000 { compatible = "ti,omap3-uart"; reg = <0x49020000 0x400>; - interrupts = <74>; + interrupts-extended = <&intc 74>; dmas = <&sdma 53 &sdma 54>; dma-names = "tx", "rx"; ti,hwmods = "uart3"; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index d2c45bfaaa2c..8cfa3c8a72b0 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -481,6 +481,21 @@ usb-supply = <&vusb>; }; +&uart2 { + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; +}; + +&uart3 { + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; +}; + +&uart4 { + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART4_RX>; +}; + &usb_otg_hs { interface-type = <1>; mode = <3>; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 48983c8d56c2..3e1da43068f6 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -570,16 +570,22 @@ }; &uart2 { + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; &uart3 { + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; &uart4 { + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART4_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 203131ebb581..43a587e097d4 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -312,7 +312,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -320,7 +320,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -328,7 +328,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index fc9299ed1074..e58be57984ab 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -636,6 +636,13 @@ status = "disabled"; }; + mailbox: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox"; + }; + timer1: timer@4ae18000 { compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 65d7d151cdc7..3df7ba860282 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -201,6 +201,7 @@ compatible = "sirf,prima2-tick"; reg = <0xb0020000 0x1000>; interrupts = <0>; + clocks = <&clks 11>; }; nand@b0030000 { diff --git a/arch/arm/boot/dts/r7s72100-genmai-reference.dts b/arch/arm/boot/dts/r7s72100-genmai-reference.dts deleted file mode 100644 index e664611a47c8..000000000000 --- a/arch/arm/boot/dts/r7s72100-genmai-reference.dts +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Device Tree Source for the Genmai board - * - * Copyright (C) 2013 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "r7s72100.dtsi" - -/ { - model = "Genmai"; - compatible = "renesas,genmai-reference", "renesas,r7s72100"; - - chosen { - bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; - }; - - memory { - device_type = "memory"; - reg = <0x08000000 0x08000000>; - }; - - lbsc { - #address-cells = <1>; - #size-cells = <1>; - }; -}; - -&i2c2 { - status = "okay"; - clock-frequency = <400000>; - - eeprom@50 { - compatible = "renesas,24c128"; - reg = <0x50>; - pagesize = <64>; - }; -}; diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index b1deaf7e2e06..56849b55e1c2 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -1,7 +1,8 @@ /* * Device Tree Source for the Genmai board * - * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013-14 Renesas Solutions Corp. + * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com> * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -15,6 +16,10 @@ model = "Genmai"; compatible = "renesas,genmai", "renesas,r7s72100"; + aliases { + serial2 = &scif2; + }; + chosen { bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; }; @@ -29,3 +34,26 @@ #size-cells = <1>; }; }; + +&extal_clk { + clock-frequency = <13330000>; +}; + +&usb_x1_clk { + clock-frequency = <48000000>; +}; + +&i2c2 { + status = "okay"; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "renesas,24c128"; + reg = <0x50>; + pagesize = <64>; + }; +}; + +&scif2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index ee700717a34b..f50fbc8f3bd9 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -1,13 +1,15 @@ /* * Device Tree Source for the r7s72100 SoC * - * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013-14 Renesas Solutions Corp. + * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com> * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any * kind, whether express or implied. */ +#include <dt-bindings/clock/r7s72100-clock.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -28,6 +30,112 @@ spi4 = &spi4; }; + clocks { + ranges; + #address-cells = <1>; + #size-cells = <1>; + + /* External clocks */ + extal_clk: extal_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* If clk present, value must be set by board */ + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + usb_x1_clk: usb_x1_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* If clk present, value must be set by board */ + clock-frequency = <0>; + clock-output-names = "usb_x1"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@fcfe0000 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-cpg-clocks", + "renesas,rz-cpg-clocks"; + reg = <0xfcfe0000 0x18>; + clocks = <&extal_clk>, <&usb_x1_clk>; + clock-output-names = "pll", "i", "g"; + }; + + /* Fixed factor clocks */ + b_clk: b_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R7S72100_CLK_PLL>; + clock-mult = <1>; + clock-div = <3>; + clock-output-names = "b"; + }; + p1_clk: p1_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R7S72100_CLK_PLL>; + clock-mult = <1>; + clock-div = <6>; + clock-output-names = "p1"; + }; + p0_clk: p0_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R7S72100_CLK_PLL>; + clock-mult = <1>; + clock-div = <12>; + clock-output-names = "p0"; + }; + + /* MSTP clocks */ + mstp3_clks: mstp3_clks@fcfe0420 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0420 4>; + clocks = <&p0_clk>; + clock-indices = <R7S72100_CLK_MTU2>; + clock-output-names = "mtu2"; + }; + + mstp4_clks: mstp4_clks@fcfe0424 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0424 4>; + clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>, + <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>; + clock-indices = < + R7S72100_CLK_SCIF0 R7S72100_CLK_SCIF1 R7S72100_CLK_SCIF2 R7S72100_CLK_SCIF3 + R7S72100_CLK_SCIF4 R7S72100_CLK_SCIF5 R7S72100_CLK_SCIF6 R7S72100_CLK_SCIF7 + >; + clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7"; + }; + + mstp9_clks: mstp9_clks@fcfe0438 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0438 4>; + clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>; + clock-indices = < + R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3 + >; + clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3"; + }; + + mstp10_clks: mstp10_clks@fcfe043c { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe043c 4>; + clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>, + <&p1_clk>; + clock-indices = < + R7S72100_CLK_SPI0 R7S72100_CLK_SPI1 R7S72100_CLK_SPI2 R7S72100_CLK_SPI3 + R7S72100_CLK_SPI4 + >; + clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4"; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -61,6 +169,7 @@ <0 162 IRQ_TYPE_LEVEL_HIGH>, <0 163 IRQ_TYPE_LEVEL_HIGH>, <0 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C0>; clock-frequency = <100000>; status = "disabled"; }; @@ -78,6 +187,7 @@ <0 170 IRQ_TYPE_LEVEL_HIGH>, <0 171 IRQ_TYPE_LEVEL_HIGH>, <0 172 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C1>; clock-frequency = <100000>; status = "disabled"; }; @@ -95,6 +205,7 @@ <0 178 IRQ_TYPE_LEVEL_HIGH>, <0 179 IRQ_TYPE_LEVEL_HIGH>, <0 180 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C2>; clock-frequency = <100000>; status = "disabled"; }; @@ -112,10 +223,107 @@ <0 186 IRQ_TYPE_LEVEL_HIGH>, <0 187 IRQ_TYPE_LEVEL_HIGH>, <0 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C3>; clock-frequency = <100000>; status = "disabled"; }; + scif0: serial@e8007000 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8007000 64>; + interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>, + <0 191 IRQ_TYPE_LEVEL_HIGH>, + <0 192 IRQ_TYPE_LEVEL_HIGH>, + <0 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif1: serial@e8007800 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8007800 64>; + interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>, + <0 195 IRQ_TYPE_LEVEL_HIGH>, + <0 196 IRQ_TYPE_LEVEL_HIGH>, + <0 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif2: serial@e8008000 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8008000 64>; + interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, + <0 199 IRQ_TYPE_LEVEL_HIGH>, + <0 200 IRQ_TYPE_LEVEL_HIGH>, + <0 197 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif3: serial@e8008800 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8008800 64>; + interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>, + <0 203 IRQ_TYPE_LEVEL_HIGH>, + <0 204 IRQ_TYPE_LEVEL_HIGH>, + <0 201 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF3>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif4: serial@e8009000 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8009000 64>; + interrupts = <0 206 IRQ_TYPE_LEVEL_HIGH>, + <0 207 IRQ_TYPE_LEVEL_HIGH>, + <0 208 IRQ_TYPE_LEVEL_HIGH>, + <0 205 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF4>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif5: serial@e8009800 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8009800 64>; + interrupts = <0 210 IRQ_TYPE_LEVEL_HIGH>, + <0 211 IRQ_TYPE_LEVEL_HIGH>, + <0 212 IRQ_TYPE_LEVEL_HIGH>, + <0 209 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF5>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif6: serial@e800a000 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe800a000 64>; + interrupts = <0 214 IRQ_TYPE_LEVEL_HIGH>, + <0 215 IRQ_TYPE_LEVEL_HIGH>, + <0 216 IRQ_TYPE_LEVEL_HIGH>, + <0 213 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF6>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif7: serial@e800a800 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe800a800 64>; + interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>, + <0 219 IRQ_TYPE_LEVEL_HIGH>, + <0 220 IRQ_TYPE_LEVEL_HIGH>, + <0 217 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF7>; + clock-names = "sci_ick"; + status = "disabled"; + }; + spi0: spi@e800c800 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800c800 0x24>; @@ -123,6 +331,7 @@ <0 239 IRQ_TYPE_LEVEL_HIGH>, <0 240 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; + clocks = <&mstp10_clks R7S72100_CLK_SPI0>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -136,6 +345,7 @@ <0 242 IRQ_TYPE_LEVEL_HIGH>, <0 243 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; + clocks = <&mstp10_clks R7S72100_CLK_SPI1>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -149,6 +359,7 @@ <0 245 IRQ_TYPE_LEVEL_HIGH>, <0 246 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; + clocks = <&mstp10_clks R7S72100_CLK_SPI2>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -162,6 +373,7 @@ <0 248 IRQ_TYPE_LEVEL_HIGH>, <0 249 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; + clocks = <&mstp10_clks R7S72100_CLK_SPI3>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -175,6 +387,7 @@ <0 251 IRQ_TYPE_LEVEL_HIGH>, <0 252 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; + clocks = <&mstp10_clks R7S72100_CLK_SPI4>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 636251b2afb3..55d29f4d2ed6 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -23,6 +23,7 @@ compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0x0>; + clock-frequency = <800000000>; }; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 86d676f62942..dd2fe46073f2 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -18,6 +18,11 @@ model = "Lager"; compatible = "renesas,lager", "renesas,r8a7790"; + aliases { + serial6 = &scif0; + serial7 = &scif1; + }; + chosen { bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; }; @@ -146,7 +151,7 @@ }; &pfc { - pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>; + pinctrl-0 = <&du_pins>; pinctrl-names = "default"; du_pins: du { @@ -264,6 +269,20 @@ }; }; +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &msiof1 { pinctrl-0 = <&msiof1_pins>; pinctrl-names = "default"; @@ -277,7 +296,6 @@ spi-cpol; spi-cpha; }; - }; &sdhi0 { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index e6130d6ff28e..7ff29601f962 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -728,7 +728,7 @@ renesas,clock-indices = < R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 - R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_RT R8A7790_CLK_VSP1_SY + R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S >; clock-output-names = "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 0d69813def85..05d44f9b202f 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -19,6 +19,11 @@ model = "Koelsch"; compatible = "renesas,koelsch", "renesas,r8a7791"; + aliases { + serial6 = &scif0; + serial7 = &scif1; + }; + chosen { bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; }; @@ -230,7 +235,7 @@ }; &pfc { - pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>; + pinctrl-0 = <&du_pins>; pinctrl-names = "default"; i2c2_pins: i2c2 { @@ -310,6 +315,20 @@ status = "okay"; }; +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 5eea08fb3722..8d7ffaeff6e0 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -733,7 +733,7 @@ renesas,clock-indices = < R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 - R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_SY + R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S >; clock-output-names = "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 048c5de00551..4387cfd420ba 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -24,6 +24,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "rockchip,rk3066-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index a494fb0cff64..238c996d4a7f 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -24,6 +24,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "rockchip,rk3066-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index 59594cf15998..ea92fd69529a 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -19,6 +19,19 @@ reg = <0x30000000 0x4000000>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + xti: xti { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "xti"; + #clock-cells = <0>; + }; + }; + serial@50000000 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index e6555bdd81b8..955e4a4f8c31 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/clock/s3c2443.h> #include "s3c24xx.dtsi" #include "s3c2416-pinctrl.dtsi" @@ -28,26 +29,53 @@ compatible = "samsung,s3c2416-irq"; }; + clocks: clock-controller@0x4c000000 { + compatible = "samsung,s3c2416-clock"; + reg = <0x4c000000 0x40>; + #clock-cells = <1>; + }; + pinctrl@56000000 { compatible = "samsung,s3c2416-pinctrl"; }; + timer@51000000 { + clocks = <&clocks PCLK_PWM>; + clock-names = "timers"; + }; + serial@50000000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; }; serial@50004000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, + <&clocks SCLK_UART>; }; serial@50008000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, + <&clocks SCLK_UART>; }; serial@5000C000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>, + <&clocks SCLK_UART>; status = "disabled"; }; @@ -55,6 +83,10 @@ compatible = "samsung,s3c6410-sdhci"; reg = <0x4AC00000 0x100>; interrupts = <0 0 21 3>; + clock-names = "hsmmc", "mmc_busclk.0", + "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>, + <&clocks MUX_HSMMC0>; status = "disabled"; }; @@ -62,18 +94,28 @@ compatible = "samsung,s3c6410-sdhci"; reg = <0x4A800000 0x100>; interrupts = <0 0 20 3>; + clock-names = "hsmmc", "mmc_busclk.0", + "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>, + <&clocks MUX_HSMMC1>; status = "disabled"; }; watchdog@53000000 { interrupts = <1 9 27 3>; + clocks = <&clocks PCLK_WDT>; + clock-names = "watchdog"; }; rtc@57000000 { compatible = "samsung,s3c2416-rtc"; + clocks = <&clocks PCLK_RTC>; + clock-names = "rtc"; }; i2c@54000000 { compatible = "samsung,s3c2440-i2c"; + clocks = <&clocks PCLK_I2C0>; + clock-names = "i2c"; }; }; diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts index 7f3baf51a3a9..32dd55e5f4e6 100644 --- a/arch/arm/boot/dts/ste-ccu8540.dts +++ b/arch/arm/boot/dts/ste-ccu8540.dts @@ -18,6 +18,7 @@ compatible = "st-ericsson,ccu8540", "st-ericsson,u8540"; memory@0 { + device_type = "memory"; reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>; }; diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts index 229508750890..651c56d400a4 100644 --- a/arch/arm/boot/dts/ste-ccu9540.dts +++ b/arch/arm/boot/dts/ste-ccu9540.dts @@ -38,8 +38,8 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; - mmc-cap-sd-highspeed; - mmc-cap-mmc-highspeed; + cap-sd-highspeed; + cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; cd-gpios = <&gpio7 6 0x4>; // 230 @@ -63,7 +63,7 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; - mmc-cap-mmc-highspeed; + cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; status = "okay"; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 6cb9b68e2188..bf8f0eddc2c0 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -116,8 +116,15 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; - mmc-cap-sd-highspeed; - mmc-cap-mmc-highspeed; + cap-sd-highspeed; + cap-mmc-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + full-pwr-cycle; + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-cmd; + st,sig-pin-fbclk; vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; pinctrl-names = "default", "sleep"; @@ -132,6 +139,7 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; + non-removable; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdi1_default_mode>; pinctrl-1 = <&sdi1_sleep_mode>; @@ -144,7 +152,9 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; - mmc-cap-mmc-highspeed; + cap-mmc-highspeed; + non-removable; + vmmc-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdi2_default_mode>; pinctrl-1 = <&sdi2_sleep_mode>; @@ -157,7 +167,8 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; - mmc-cap-mmc-highspeed; + cap-mmc-highspeed; + non-removable; vmmc-supply = <&ab8500_ldo_aux2_reg>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdi4_default_mode>; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 5acc0449676a..d316c955bd5f 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -840,8 +840,8 @@ interrupts = <22>; max-frequency = <48000000>; bus-width = <4>; - mmc-cap-mmc-highspeed; - mmc-cap-sd-highspeed; + cap-mmc-highspeed; + cap-sd-highspeed; cd-gpios = <&gpio3 15 0x1>; cd-inverted; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index a2f632d0be2a..474ef83229cd 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -156,7 +156,7 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; - mmc-cap-mmc-highspeed; + cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; pinctrl-names = "default", "sleep"; @@ -195,7 +195,7 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; - mmc-cap-mmc-highspeed; + cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdi4_default_mode>; diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts index 6fe688e9e4da..82a661677e97 100644 --- a/arch/arm/boot/dts/ste-u300.dts +++ b/arch/arm/boot/dts/ste-u300.dts @@ -442,8 +442,8 @@ clock-names = "apb_pclk", "mclk"; max-frequency = <24000000>; bus-width = <4>; // SD-card slot - mmc-cap-mmc-highspeed; - mmc-cap-sd-highspeed; + cap-mmc-highspeed; + cap-sd-highspeed; cd-gpios = <&gpio 12 0x4>; cd-inverted; vmmc-supply = <&ab3100_ldo_g_reg>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 56df970ffe25..385933bac114 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -93,7 +93,7 @@ pll4: clk@01c20018 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; + compatible = "allwinner,sun7i-a20-pll4-clk"; reg = <0x01c20018 0x4>; clocks = <&osc24M>; clock-output-names = "pll4"; @@ -115,6 +115,14 @@ clock-output-names = "pll6_sata", "pll6_other", "pll6"; }; + pll8: clk@01c20040 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-pll4-clk"; + reg = <0x01c20040 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll8"; + }; + cpu: cpu@01c20054 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-cpu-clk"; @@ -898,9 +906,9 @@ #size-cells = <0>; }; - i2c4: i2c@01c2bc00 { + i2c4: i2c@01c2c000 { compatible = "allwinner,sun4i-i2c"; - reg = <0x01c2bc00 0x400>; + reg = <0x01c2c000 0x400>; interrupts = <0 89 4>; clocks = <&apb1_gates 15>; clock-frequency = <100000>; diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi index c353ef0a6ac7..3537ae5b2146 100644 --- a/arch/arm/boot/dts/twl4030_omap3.dtsi +++ b/arch/arm/boot/dts/twl4030_omap3.dtsi @@ -8,7 +8,7 @@ &twl { pinctrl-names = "default"; - pinctrl-0 = <&twl4030_pins>; + pinctrl-0 = <&twl4030_pins &twl4030_vpins>; }; &omap3_pmx_core { @@ -23,3 +23,20 @@ >; }; }; + +/* + * If your board is not using the I2C4 pins with twl4030, then don't include + * this file. For proper idle mode signaling with sys_clkreq and sys_off_mode + * pins we need to configure I2C4, or else use the legacy sys_nvmode1 and + * sys_nvmode2 signaling. + */ +&omap3_pmx_wkup { + twl4030_vpins: pinmux_twl4030_vpins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0) /* i2c4_scl.i2c4_scl */ + OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0) /* i2c4_sda.i2c4_sda */ + OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0) /* sys_clkreq.sys_clkreq */ + OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0) /* sys_off_mode.sys_off_mode */ + >; + }; +}; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index ac870fb3fa0d..756c986995a3 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -74,8 +74,24 @@ v2m_sysreg: sysreg@010000 { compatible = "arm,vexpress-sysreg"; reg = <0x010000 0x1000>; - gpio-controller; - #gpio-cells = <2>; + + v2m_led_gpios: sys_led@08 { + compatible = "arm,vexpress-sysreg,sys_led"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_mmc_gpios: sys_mci@48 { + compatible = "arm,vexpress-sysreg,sys_mci"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_flash_gpios: sys_flash@4c { + compatible = "arm,vexpress-sysreg,sys_flash"; + gpio-controller; + #gpio-cells = <2>; + }; }; v2m_sysctl: sysctl@020000 { @@ -113,8 +129,8 @@ compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; interrupts = <9 10>; - cd-gpios = <&v2m_sysreg 0 0>; - wp-gpios = <&v2m_sysreg 1 0>; + cd-gpios = <&v2m_mmc_gpios 0 0>; + wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; vmmc-supply = <&v2m_fixed_3v3>; clocks = <&v2m_clk24mhz>, <&smbclk>; @@ -265,6 +281,58 @@ clock-output-names = "v2m:refclk32khz"; }; + leds { + compatible = "gpio-leds"; + + user@1 { + label = "v2m:green:user1"; + gpios = <&v2m_led_gpios 0 0>; + linux,default-trigger = "heartbeat"; + }; + + user@2 { + label = "v2m:green:user2"; + gpios = <&v2m_led_gpios 1 0>; + linux,default-trigger = "mmc0"; + }; + + user@3 { + label = "v2m:green:user3"; + gpios = <&v2m_led_gpios 2 0>; + linux,default-trigger = "cpu0"; + }; + + user@4 { + label = "v2m:green:user4"; + gpios = <&v2m_led_gpios 3 0>; + linux,default-trigger = "cpu1"; + }; + + user@5 { + label = "v2m:green:user5"; + gpios = <&v2m_led_gpios 4 0>; + linux,default-trigger = "cpu2"; + }; + + user@6 { + label = "v2m:green:user6"; + gpios = <&v2m_led_gpios 5 0>; + linux,default-trigger = "cpu3"; + }; + + user@7 { + label = "v2m:green:user7"; + gpios = <&v2m_led_gpios 6 0>; + linux,default-trigger = "cpu4"; + }; + + user@8 { + label = "v2m:green:user8"; + gpios = <&v2m_led_gpios 7 0>; + linux,default-trigger = "cpu5"; + }; + }; + mcc { compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index f1420368355b..ba856d604fb7 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -73,8 +73,24 @@ v2m_sysreg: sysreg@00000 { compatible = "arm,vexpress-sysreg"; reg = <0x00000 0x1000>; - gpio-controller; - #gpio-cells = <2>; + + v2m_led_gpios: sys_led@08 { + compatible = "arm,vexpress-sysreg,sys_led"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_mmc_gpios: sys_mci@48 { + compatible = "arm,vexpress-sysreg,sys_mci"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_flash_gpios: sys_flash@4c { + compatible = "arm,vexpress-sysreg,sys_flash"; + gpio-controller; + #gpio-cells = <2>; + }; }; v2m_sysctl: sysctl@01000 { @@ -112,8 +128,8 @@ compatible = "arm,pl180", "arm,primecell"; reg = <0x05000 0x1000>; interrupts = <9 10>; - cd-gpios = <&v2m_sysreg 0 0>; - wp-gpios = <&v2m_sysreg 1 0>; + cd-gpios = <&v2m_mmc_gpios 0 0>; + wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; vmmc-supply = <&v2m_fixed_3v3>; clocks = <&v2m_clk24mhz>, <&smbclk>; @@ -264,6 +280,58 @@ clock-output-names = "v2m:refclk32khz"; }; + leds { + compatible = "gpio-leds"; + + user@1 { + label = "v2m:green:user1"; + gpios = <&v2m_led_gpios 0 0>; + linux,default-trigger = "heartbeat"; + }; + + user@2 { + label = "v2m:green:user2"; + gpios = <&v2m_led_gpios 1 0>; + linux,default-trigger = "mmc0"; + }; + + user@3 { + label = "v2m:green:user3"; + gpios = <&v2m_led_gpios 2 0>; + linux,default-trigger = "cpu0"; + }; + + user@4 { + label = "v2m:green:user4"; + gpios = <&v2m_led_gpios 3 0>; + linux,default-trigger = "cpu1"; + }; + + user@5 { + label = "v2m:green:user5"; + gpios = <&v2m_led_gpios 4 0>; + linux,default-trigger = "cpu2"; + }; + + user@6 { + label = "v2m:green:user6"; + gpios = <&v2m_led_gpios 5 0>; + linux,default-trigger = "cpu3"; + }; + + user@7 { + label = "v2m:green:user7"; + gpios = <&v2m_led_gpios 6 0>; + linux,default-trigger = "cpu4"; + }; + + user@8 { + label = "v2m:green:user8"; + gpios = <&v2m_led_gpios 7 0>; + linux,default-trigger = "cpu5"; + }; + }; + mcc { compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 15f98cbcb75a..a25c262326dc 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -312,6 +312,7 @@ arm,vexpress-sysreg,func = <12 0>; label = "A15 Pcore"; }; + power@1 { /* Total power for the three A7 cores */ compatible = "arm,vexpress-power"; @@ -322,14 +323,14 @@ energy@0 { /* Total energy for the two A15 cores */ compatible = "arm,vexpress-energy"; - arm,vexpress-sysreg,func = <13 0>; + arm,vexpress-sysreg,func = <13 0>, <13 1>; label = "A15 Jcore"; }; energy@2 { /* Total energy for the three A7 cores */ compatible = "arm,vexpress-energy"; - arm,vexpress-sysreg,func = <13 2>; + arm,vexpress-sysreg,func = <13 2>, <13 3>; label = "A7 Jcore"; }; }; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index d13cdc322e17..760bbc463c5b 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -186,6 +186,11 @@ }; }; + devcfg: devcfg@f8007000 { + compatible = "xlnx,zynq-devcfg-1.0"; + reg = <0xf8007000 0x100>; + } ; + global_timer: timer@f8f00200 { compatible = "arm,cortex-a9-global-timer"; reg = <0xf8f00200 0x20>; |