1 files changed, 0 insertions, 61 deletions
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
deleted file mode 100644
index db8e0d71c5bc..000000000000
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-NVIDIA Tegra114 SPI controller.
-
-Required properties:
-- compatible : For Tegra114, must contain "nvidia,tegra114-spi".
-  Otherwise, must contain '"nvidia,<chip>-spi", "nvidia,tegra114-spi"' where
-  <chip> is tegra124, tegra132, or tegra210.
-- reg: Should contain SPI registers location and length.
-- interrupts: Should contain SPI interrupts.
-- clock-names : Must include the following entries:
-  - spi
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - spi
-- dmas : Must contain an entry for each entry in clock-names.
-  See ../dma/dma.txt for details.
-- dma-names : Must include the following entries:
-  - rx
-  - tx
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-
-Recommended properties:
-- spi-max-frequency: Definition as per
-                     Documentation/devicetree/bindings/spi/spi-bus.txt
-Optional properties:
-- nvidia,tx-clk-tap-delay: Delays the clock going out to the external device
-  with this tap value. This property is used to tune the outgoing data from
-  Tegra SPI master with respect to outgoing Tegra SPI master clock.
-  Tap values vary based on the platform design trace lengths from Tegra SPI
-  to corresponding slave devices. Valid tap values are from 0 thru 63.
-- nvidia,rx-clk-tap-delay: Delays the clock coming in from the external device
-  with this tap value. This property is used to adjust the Tegra SPI master
-  clock with respect to the data from the SPI slave device.
-  Tap values vary based on the platform design trace lengths from Tegra SPI
-  to corresponding slave devices. Valid tap values are from 0 thru 63.
-
-Example:
-
-spi@7000d600 {
-	compatible = "nvidia,tegra114-spi";
-	reg = <0x7000d600 0x200>;
-	interrupts = <0 82 0x04>;
-	spi-max-frequency = <25000000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&tegra_car 44>;
-	clock-names = "spi";
-	resets = <&tegra_car 44>;
-	reset-names = "spi";
-	dmas = <&apbdma 16>, <&apbdma 16>;
-	dma-names = "rx", "tx";
-	<spi-client>@<bus_num> {
-		...
-		...
-		nvidia,rx-clk-tap-delay = <0>;
-		nvidia,tx-clk-tap-delay = <16>;
-		...
-	};
-
-};