Linux kernel documentation tree maintained by Jonathan Corbet http://mirrors.hust.edu.cn/git/lwn.git/atom?h=master 2026-04-17T14:18:03+00:00 2026-04-17T14:18:03+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-04-17T14:18:03+00:00 urn:sha1:01f492e1817e858d1712f2489d0afbaa552f417b Pull kvm updates from Paolo Bonzini: "Arm: - Add support for tracing in the standalone EL2 hypervisor code, which should help both debugging and performance analysis. This uses the new infrastructure for 'remote' trace buffers that can be exposed by non-kernel entities such as firmware, and which came through the tracing tree - Add support for GICv5 Per Processor Interrupts (PPIs), as the starting point for supporting the new GIC architecture in KVM - Finally add support for pKVM protected guests, where pages are unmapped from the host as they are faulted into the guest and can be shared back from the guest using pKVM hypercalls. Protected guests are created using a new machine type identifier. As the elusive guestmem has not yet delivered on its promises, anonymous memory is also supported This is only a first step towards full isolation from the host; for example, the CPU register state and DMA accesses are not yet isolated. Because this does not really yet bring fully what it promises, it is hidden behind CONFIG_ARM_PKVM_GUEST + 'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is created. Caveat emptor - Rework the dreaded user_mem_abort() function to make it more maintainable, reducing the amount of state being exposed to the various helpers and rendering a substantial amount of state immutable - Expand the Stage-2 page table dumper to support NV shadow page tables on a per-VM basis - Tidy up the pKVM PSCI proxy code to be slightly less hard to follow - Fix both SPE and TRBE in non-VHE configurations so that they do not generate spurious, out of context table walks that ultimately lead to very bad HW lockups - A small set of patches fixing the Stage-2 MMU freeing in error cases - Tighten-up accepted SMC immediate value to be only #0 for host SMCCC calls - The usual cleanups and other selftest churn LoongArch: - Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel() - Add DMSINTC irqchip in kernel support RISC-V: - Fix steal time shared memory alignment checks - Fix vector context allocation leak - Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi() - Fix double-free of sdata in kvm_pmu_clear_snapshot_area() - Fix integer overflow in kvm_pmu_validate_counter_mask() - Fix shift-out-of-bounds in make_xfence_request() - Fix lost write protection on huge pages during dirty logging - Split huge pages during fault handling for dirty logging - Skip CSR restore if VCPU is reloaded on the same core - Implement kvm_arch_has_default_irqchip() for KVM selftests - Factored-out ISA checks into separate sources - Added hideleg to struct kvm_vcpu_config - Factored-out VCPU config into separate sources - Support configuration of per-VM HGATP mode from KVM user space s390: - Support for ESA (31-bit) guests inside nested hypervisors - Remove restriction on memslot alignment, which is not needed anymore with the new gmap code - Fix LPSW/E to update the bear (which of course is the breaking event address register) x86: - Shut up various UBSAN warnings on reading module parameter before they were initialized - Don't zero-allocate page tables that are used for splitting hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in the page table and thus write all bytes - As an optimization, bail early when trying to unsync 4KiB mappings if the target gfn can just be mapped with a 2MiB hugepage x86 generic: - Copy single-chunk MMIO write values into struct kvm_vcpu (more precisely struct kvm_mmio_fragment) to fix use-after-free stack bugs where KVM would dereference stack pointer after an exit to userspace - Clean up and comment the emulated MMIO code to try to make it easier to maintain (not necessarily "easy", but "easier") - Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of VMX and SVM enabling) as it is needed for trusted I/O - Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions - Immediately fail the build if a required #define is missing in one of KVM's headers that is included multiple times - Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected exception, mostly to prevent syzkaller from abusing the uAPI to trigger WARNs, but also because it can help prevent userspace from unintentionally crashing the VM - Exempt SMM from CPUID faulting on Intel, as per the spec - Misc hardening and cleanup changes x86 (AMD): - Fix and optimize IRQ window inhibit handling for AVIC; make it per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple vCPUs have to-be-injected IRQs - Clean up and optimize the OSVW handling, avoiding a bug in which KVM would overwrite state when enabling virtualization on multiple CPUs in parallel. This should not be a problem because OSVW should usually be the same for all CPUs - Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains about a "too large" size based purely on user input - Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION - Disallow synchronizing a VMSA of an already-launched/encrypted vCPU, as doing so for an SNP guest will crash the host due to an RMP violation page fault - Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped queries are required to hold kvm->lock, and enforce it by lockdep. Fix various bugs where sev_guest() was not ensured to be stable for the whole duration of a function or ioctl - Convert a pile of kvm->lock SEV code to guard() - Play nicer with userspace that does not enable KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6 as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the payload would end up in EXITINFO2 rather than CR2, for example). Only set CR2 and DR6 when consumption of the payload is imminent, but on the other hand force delivery of the payload in all paths where userspace retrieves CR2 or DR6 - Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT instead of vmcb02->save.cr2. The value is out of sync after a save/restore or after a #PF is injected into L2 - Fix a class of nSVM bugs where some fields written by the CPU are not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so are not up-to-date when saved by KVM_GET_NESTED_STATE - Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly initialized after save+restore - Add a variety of missing nSVM consistency checks - Fix several bugs where KVM failed to correctly update VMCB fields on nested #VMEXIT - Fix several bugs where KVM failed to correctly synthesize #UD or #GP for SVM-related instructions - Add support for save+restore of virtualized LBRs (on SVM) - Refactor various helpers and macros to improve clarity and (hopefully) make the code easier to maintain - Aggressively sanitize fields when copying from vmcb12, to guard against unintentionally allowing L1 to utilize yet-to-be-defined features - Fix several bugs where KVM botched rAX legality checks when emulating SVM instructions. There are remaining issues in that KVM doesn't handle size prefix overrides for 64-bit guests - Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails instead of somewhat arbitrarily synthesizing #GP (i.e. don't double down on AMD's architectural but sketchy behavior of generating #GP for "unsupported" addresses) - Cache all used vmcb12 fields to further harden against TOCTOU bugs x86 (Intel): - Drop obsolete branch hint prefixes from the VMX instruction macros - Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a register input when appropriate - Code cleanups guest_memfd: - Don't mark guest_memfd folios as accessed, as guest_memfd doesn't support reclaim, the memory is unevictable, and there is no storage to write back to LoongArch selftests: - Add KVM PMU test cases s390 selftests: - Enable more memory selftests x86 selftests: - Add support for Hygon CPUs in KVM selftests - Fix a bug in the MSR test where it would get false failures on AMD/Hygon CPUs with exactly one of RDPID or RDTSCP - Add an MADV_COLLAPSE testcase for guest_memfd as a regression test for a bug where the kernel would attempt to collapse guest_memfd folios against KVM's will" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits) KVM: x86: use inlines instead of macros for is_sev_*guest x86/virt: Treat SVM as unsupported when running as an SEV+ guest KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper KVM: SEV: use mutex guard in snp_handle_guest_req() KVM: SEV: use mutex guard in sev_mem_enc_unregister_region() KVM: SEV: use mutex guard in sev_mem_enc_ioctl() KVM: SEV: use mutex guard in snp_launch_update() KVM: SEV: Assert that kvm->lock is held when querying SEV+ support KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe" KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y KVM: SEV: WARN on unhandled VM type when initializing VM KVM: LoongArch: selftests: Add PMU overflow interrupt test KVM: LoongArch: selftests: Add basic PMU event counting test KVM: LoongArch: selftests: Add cpucfg read/write helpers LoongArch: KVM: Add DMSINTC inject msi to vCPU LoongArch: KVM: Add DMSINTC device support LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch ... 2026-04-17T03:11:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-04-17T03:11:56+00:00 urn:sha1:440d6635b20037bc9ad46b20817d7b61cef0fc1b Pull non-MM updates from Andrew Morton: - "pid: make sub-init creation retryable" (Oleg Nesterov) Make creation of init in a new namespace more robust by clearing away some historical cruft which is no longer needed. Also some documentation fixups - "selftests/fchmodat2: Error handling and general" (Mark Brown) Fix and a cleanup for the fchmodat2() syscall selftest - "lib: polynomial: Move to math/ and clean up" (Andy Shevchenko) - "hung_task: Provide runtime reset interface for hung task detector" (Aaron Tomlin) Give administrators the ability to zero out /proc/sys/kernel/hung_task_detect_count - "tools/getdelays: use the static UAPI headers from tools/include/uapi" (Thomas Weißschuh) Teach getdelays to use the in-kernel UAPI headers rather than the system-provided ones - "watchdog/hardlockup: Improvements to hardlockup" (Mayank Rungta) Several cleanups and fixups to the hardlockup detector code and its documentation - "lib/bch: fix undefined behavior from signed left-shifts" (Josh Law) A couple of small/theoretical fixes in the bch code - "ocfs2/dlm: fix two bugs in dlm_match_regions()" (Junrui Luo) - "cleanup the RAID5 XOR library" (Christoph Hellwig) A quite far-reaching cleanup to this code. I can't do better than to quote Christoph: "The XOR library used for the RAID5 parity is a bit of a mess right now. The main file sits in crypto/ despite not being cryptography and not using the crypto API, with the generic implementations sitting in include/asm-generic and the arch implementations sitting in an asm/ header in theory. The latter doesn't work for many cases, so architectures often build the code directly into the core kernel, or create another module for the architecture code. Change this to a single module in lib/ that also contains the architecture optimizations, similar to the library work Eric Biggers has done for the CRC and crypto libraries later. After that it changes to better calling conventions that allow for smarter architecture implementations (although none is contained here yet), and uses static_call to avoid indirection function call overhead" - "lib/list_sort: Clean up list_sort() scheduling workarounds" (Kuan-Wei Chiu) Clean up this library code by removing a hacky thing which was added for UBIFS, which UBIFS doesn't actually need - "Fix bugs in extract_iter_to_sg()" (Christian Ehrhardt) Fix a few bugs in the scatterlist code, add in-kernel tests for the now-fixed bugs and fix a leak in the test itself - "kdump: Enable LUKS-encrypted dump target support in ARM64 and PowerPC" (Coiby Xu) Enable support of the LUKS-encrypted device dump target on arm64 and powerpc - "ocfs2: consolidate extent list validation into block read callbacks" (Joseph Qi) Cleanup, simplify, and make more robust ocfs2's validation of extent list fields (Kernel test robot loves mounting corrupted fs images!) * tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (127 commits) ocfs2: validate group add input before caching ocfs2: validate bg_bits during freefrag scan ocfs2: fix listxattr handling when the buffer is full doc: watchdog: fix typos etc update Sean's email address ocfs2: use get_random_u32() where appropriate ocfs2: split transactions in dio completion to avoid credit exhaustion ocfs2: remove redundant l_next_free_rec check in __ocfs2_find_path() ocfs2: validate extent block list fields during block read ocfs2: remove empty extent list check in ocfs2_dx_dir_lookup_rec() ocfs2: validate dx_root extent list fields during block read ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY ocfs2: handle invalid dinode in ocfs2_group_extend .get_maintainer.ignore: add Askar ocfs2: validate bg_list extent bounds in discontig groups checkpatch: exclude forward declarations of const structs tools/accounting: handle truncated taskstats netlink messages taskstats: set version in TGID exit notifications ocfs2/heartbeat: fix slot mapping rollback leaks on error paths arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel ... 2026-04-15T02:59:25+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-04-15T02:59:25+00:00 urn:sha1:7c8a4671dc3247a26a702e5f5996e9f453d7070d Pull vfs mount updates from Christian Brauner: - Add FSMOUNT_NAMESPACE flag to fsmount() that creates a new mount namespace with the newly created filesystem attached to a copy of the real rootfs. This returns a namespace file descriptor instead of an O_PATH mount fd, similar to how OPEN_TREE_NAMESPACE works for open_tree(). This allows creating a new filesystem and immediately placing it in a new mount namespace in a single operation, which is useful for container runtimes and other namespace-based isolation mechanisms. This accompanies OPEN_TREE_NAMESPACE and avoids a needless detour via OPEN_TREE_NAMESPACE to get the same effect. Will be especially useful when you mount an actual filesystem to be used as the container rootfs. - Currently, creating a new mount namespace always copies the entire mount tree from the caller's namespace. For containers and sandboxes that intend to build their mount table from scratch this is wasteful: they inherit a potentially large mount tree only to immediately tear it down. This series adds support for creating a mount namespace that contains only a clone of the root mount, with none of the child mounts. Two new flags are introduced: - CLONE_EMPTY_MNTNS (0x400000000) for clone3(), using the 64-bit flag space - UNSHARE_EMPTY_MNTNS (0x00100000) for unshare() Both flags imply CLONE_NEWNS. The resulting namespace contains a single nullfs root mount with an immutable empty directory. The intended workflow is to then mount a real filesystem (e.g., tmpfs) over the root and build the mount table from there. - Allow MOVE_MOUNT_BENEATH to target the caller's rootfs, allowing to switch out the rootfs without pivot_root(2). The traditional approach to switching the rootfs involves pivot_root(2) or a chroot_fs_refs()-based mechanism that atomically updates fs->root for all tasks sharing the same fs_struct. This has consequences for fork(), unshare(CLONE_FS), and setns(). This series instead decomposes root-switching into individually atomic, locally-scoped steps: fd_tree = open_tree(-EBADF, "/newroot", OPEN_TREE_CLONE | OPEN_TREE_CLOEXEC); fchdir(fd_tree); move_mount(fd_tree, "", AT_FDCWD, "/", MOVE_MOUNT_BENEATH | MOVE_MOUNT_F_EMPTY_PATH); chroot("."); umount2(".", MNT_DETACH); Since each step only modifies the caller's own state, the fork/unshare/setns races are eliminated by design. A key step to making this possible is to remove the locked mount restriction. Originally MOVE_MOUNT_BENEATH doesn't support mounting beneath a mount that is locked. The locked mount protects the underlying mount from being revealed. This is a core mechanism of unshare(CLONE_NEWUSER | CLONE_NEWNS). The mounts in the new mount namespace become locked. That effectively makes the new mount table useless as the caller cannot ever get rid of any of the mounts no matter how useless they are. We can lift this restriction though. We simply transfer the locked property from the top mount to the mount beneath. This works because what we care about is to protect the underlying mount aka the parent. The mount mounted between the parent and the top mount takes over the job of protecting the parent mount from the top mount mount. This leaves us free to remove the locked property from the top mount which can consequently be unmounted: unshare(CLONE_NEWUSER | CLONE_NEWNS) and we inherit a clone of procfs on /proc then currently we cannot unmount it as: umount -l /proc will fail with EINVAL because the procfs mount is locked. After this series we can now do: mount --beneath -t tmpfs tmpfs /proc umount -l /proc after which a tmpfs mount has been placed beneath the procfs mount. The tmpfs mount has become locked and the procfs mount has become unlocked. This means you can safely modify an inherited mount table after unprivileged namespace creation. Afterwards we simply make it possible to move a mount beneath the rootfs allowing to upgrade the rootfs. Removing the locked restriction makes this very useful for containers created with unshare(CLONE_NEWUSER | CLONE_NEWNS) to reshuffle an inherited mount table safely and MOVE_MOUNT_BENEATH makes it possible to switch out the rootfs instead of using the costly pivot_root(2). * tag 'vfs-7.1-rc1.mount.v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: selftests/namespaces: remove unused utils.h include from listns_efault_test selftests/fsmount_ns: add missing TARGETS and fix cap test selftests/empty_mntns: fix wrong CLONE_EMPTY_MNTNS hex value in comment selftests/empty_mntns: fix statmount_alloc() signature mismatch selftests/statmount: remove duplicate wait_for_pid() mount: always duplicate mount selftests/filesystems: add MOVE_MOUNT_BENEATH rootfs tests move_mount: allow MOVE_MOUNT_BENEATH on the rootfs move_mount: transfer MNT_LOCKED selftests/filesystems: add clone3 tests for empty mount namespaces selftests/filesystems: add tests for empty mount namespaces namespace: allow creating empty mount namespaces selftests: add FSMOUNT_NAMESPACE tests selftests/statmount: add statmount_alloc() helper tools: update mount.h header mount: add FSMOUNT_NAMESPACE mount: simplify __do_loopback() mount: start iterating from start of rbtree 2026-04-15T01:36:10+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-04-15T01:36:10+00:00 urn:sha1:91a4855d6c03e770e42f17c798a36a3c46e63de2 Pull networking updates from Jakub Kicinski: "Core & protocols: - Support HW queue leasing, allowing containers to be granted access to HW queues for zero-copy operations and AF_XDP - Number of code moves to help the compiler with inlining. Avoid output arguments for returning drop reason where possible - Rework drop handling within qdiscs to include more metadata about the reason and dropping qdisc in the tracepoints - Remove the rtnl_lock use from IP Multicast Routing - Pack size information into the Rx Flow Steering table pointer itself. This allows making the table itself a flat array of u32s, thus making the table allocation size a power of two - Report TCP delayed ack timer information via socket diag - Add ip_local_port_step_width sysctl to allow distributing the randomly selected ports more evenly throughout the allowed space - Add support for per-route tunsrc in IPv6 segment routing - Start work of switching sockopt handling to iov_iter - Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid buffer size drifting up - Support MSG_EOR in MPTCP - Add stp_mode attribute to the bridge driver for STP mode selection. This addresses concerns about call_usermodehelper() usage - Remove UDP-Lite support (as announced in 2023) - Remove support for building IPv6 as a module. Remove the now unnecessary function calling indirection Cross-tree stuff: - Move Michael MIC code from generic crypto into wireless, it's considered insecure but some WiFi networks still need it Netfilter: - Switch nft_fib_ipv6 module to no longer need temporary dst_entry object allocations by using fib6_lookup() + RCU. Florian W reports this gets us ~13% higher packet rate - Convert IPVS's global __ip_vs_mutex to per-net service_mutex and switch the service tables to be per-net. Convert some code that walks the service lists to use RCU instead of the service_mutex - Add more opinionated input validation to lower security exposure - Make IPVS hash tables to be per-netns and resizable Wireless: - Finished assoc frame encryption/EPPKE/802.1X-over-auth - Radar detection improvements - Add 6 GHz incumbent signal detection APIs - Multi-link support for FILS, probe response templates and client probing - New APIs and mac80211 support for NAN (Neighbor Aware Networking, aka Wi-Fi Aware) so less work must be in firmware Driver API: - Add numerical ID for devlink instances (to avoid having to create fake bus/device pairs just to have an ID). Support shared devlink instances which span multiple PFs - Add standard counters for reporting pause storm events (implement in mlx5 and fbnic) - Add configuration API for completion writeback buffering (implement in mana) - Support driver-initiated change of RSS context sizes - Support DPLL monitoring input frequency (implement in zl3073x) - Support per-port resources in devlink (implement in mlx5) Misc: - Expand the YAML spec for Netfilter Drivers - Software: - macvlan: support multicast rx for bridge ports with shared source MAC address - team: decouple receive and transmit enablement for IEEE 802.3ad LACP "independent control" - Ethernet high-speed NICs: - nVidia/Mellanox: - support high order pages in zero-copy mode (for payload coalescing) - support multiple packets in a page (for systems with 64kB pages) - Broadcom 25-400GE (bnxt): - implement XDP RSS hash metadata extraction - add software fallback for UDP GSO, lowering the IOMMU cost - Broadcom 800GE (bnge): - add link status and configuration handling - add various HW and SW statistics - Marvell/Cavium: - NPC HW block support for cn20k - Huawei (hinic3): - add mailbox / control queue - add rx VLAN offload - add driver info and link management - Ethernet NICs: - Marvell/Aquantia: - support reading SFP module info on some AQC100 cards - Realtek PCI (r8169): - add support for RTL8125cp - Realtek USB (r8152): - support for the RTL8157 5Gbit chip - add 2500baseT EEE status/configuration support - Ethernet NICs embedded and off-the-shelf IP: - Synopsys (stmmac): - cleanup and reorganize SerDes handling and PCS support - cleanup descriptor handling and per-platform data - cleanup and consolidate MDIO defines and handling - shrink driver memory use for internal structures - improve Tx IRQ coalescing - improve TCP segmentation handling - add support for Spacemit K3 - Cadence (macb): - support PHYs that have inband autoneg disabled with GEM - support IEEE 802.3az EEE - rework usrio capabilities and handling - AMD (xgbe): - improve power management for S0i3 - improve TX resilience for link-down handling - Virtual: - Google cloud vNIC: - support larger ring sizes in DQO-QPL mode - improve HW-GRO handling - support UDP GSO for DQO format - PCIe NTB: - support queue count configuration - Ethernet PHYs: - automatically disable PHY autonomous EEE if MAC is in charge - Broadcom: - add BCM84891/BCM84892 support - Micrel: - support for LAN9645X internal PHY - Realtek: - add RTL8224 pair order support - support PHY LEDs on RTL8211F-VD - support spread spectrum clocking (SSC) - Maxlinear: - add PHY-level statistics via ethtool - Ethernet switches: - Maxlinear (mxl862xx): - support for bridge offloading - support for VLANs - support driver statistics - Bluetooth: - large number of fixes and new device IDs - Mediatek: - support MT6639 (MT7927) - support MT7902 SDIO - WiFi: - Intel (iwlwifi): - UNII-9 and continuing UHR work - MediaTek (mt76): - mt7996/mt7925 MLO fixes/improvements - mt7996 NPU support (HW eth/wifi traffic offload) - Qualcomm (ath12k): - monitor mode support on IPQ5332 - basic hwmon temperature reporting - support IPQ5424 - Realtek: - add USB RX aggregation to improve performance - add USB TX flow control by tracking in-flight URBs - Cellular: - IPA v5.2 support" * tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits) net: pse-pd: fix kernel-doc function name for pse_control_find_by_id() wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit wireguard: allowedips: remove redundant space tools: ynl: add sample for wireguard wireguard: allowedips: Use kfree_rcu() instead of call_rcu() MAINTAINERS: Add netkit selftest files selftests/net: Add additional test coverage in nk_qlease selftests/net: Split netdevsim tests from HW tests in nk_qlease tools/ynl: Make YnlFamily closeable as a context manager net: airoha: Add missing PPE configurations in airoha_ppe_hw_init() net: airoha: Fix VIP configuration for AN7583 SoC net: caif: clear client service pointer on teardown net: strparser: fix skb_head leak in strp_abort_strp() net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete() selftests/bpf: add test for xdp_master_redirect with bond not up net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration sctp: disable BH before calling udp_tunnel_xmit_skb() sctp: fix missing encap_port propagation for GSO fragments net: airoha: Rely on net_device pointer in ETS callbacks ... 2026-04-15T01:04:04+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-04-15T01:04:04+00:00 urn:sha1:f5ad4101009e7f5f5984ffea6923d4fcd470932a Pull bpf updates from Alexei Starovoitov: - Welcome new BPF maintainers: Kumar Kartikeya Dwivedi, Eduard Zingerman while Martin KaFai Lau reduced his load to Reviwer. - Lots of fixes everywhere from many first time contributors. Thank you All. - Diff stat is dominated by mechanical split of verifier.c into multiple components: - backtrack.c: backtracking logic and jump history - states.c: state equivalence - cfg.c: control flow graph, postorder, strongly connected components - liveness.c: register and stack liveness - fixups.c: post-verification passes: instruction patching, dead code removal, bpf_loop inlining, finalize fastcall 8k line were moved. verifier.c still stands at 20k lines. Further refactoring is planned for the next release. - Replace dynamic stack liveness with static stack liveness based on data flow analysis. This improved the verification time by 2x for some programs and equally reduced memory consumption. New logic is in liveness.c and supported by constant folding in const_fold.c (Eduard Zingerman, Alexei Starovoitov) - Introduce BTF layout to ease addition of new BTF kinds (Alan Maguire) - Use kmalloc_nolock() universally in BPF local storage (Amery Hung) - Fix several bugs in linked registers delta tracking (Daniel Borkmann) - Improve verifier support of arena pointers (Emil Tsalapatis) - Improve verifier tracking of register bounds in min/max and tnum domains (Harishankar Vishwanathan, Paul Chaignon, Hao Sun) - Further extend support for implicit arguments in the verifier (Ihor Solodrai) - Add support for nop,nop5 instruction combo for USDT probes in libbpf (Jiri Olsa) - Support merging multiple module BTFs (Josef Bacik) - Extend applicability of bpf_kptr_xchg (Kaitao Cheng) - Retire rcu_trace_implies_rcu_gp() (Kumar Kartikeya Dwivedi) - Support variable offset context access for 'syscall' programs (Kumar Kartikeya Dwivedi) - Migrate bpf_task_work and dynptr to kmalloc_nolock() (Mykyta Yatsenko) - Fix UAF in in open-coded task_vma iterator (Puranjay Mohan) * tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (241 commits) selftests/bpf: cover short IPv4/IPv6 inputs with adjust_room bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb selftests/bpf: Use memfd_create instead of shm_open in cgroup_iter_memcg selftests/bpf: Add test for cgroup storage OOB read bpf: Fix OOB in pcpu_init_value selftests/bpf: Fix reg_bounds to match new tnum-based refinement selftests/bpf: Add tests for non-arena/arena operations bpf: Allow instructions with arena source and non-arena dest registers bpftool: add missing fsession to the usage and docs of bpftool docs/bpf: add missing fsession attach type to docs bpf: add missing fsession to the verifier log bpf: Move BTF checking logic into check_btf.c bpf: Move backtracking logic to backtrack.c bpf: Move state equivalence logic to states.c bpf: Move check_cfg() into cfg.c bpf: Move compute_insn_live_regs() into liveness.c bpf: Move fixup/post-processing logic from verifier.c into fixups.c bpf: Simplify do_check_insn() bpf: Move checks for reserved fields out of the main pass bpf: Delete unused variable ... 2026-04-15T00:16:38+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-04-15T00:16:38+00:00 urn:sha1:88b29f3f579987fff0d2bd726d5fa95a53f857fa Pull module updates from Sami Tolvanen: "Kernel symbol flags: - Replace the separate *_gpl symbol sections (__ksymtab_gpl and __kcrctab_gpl) with a unified symbol table and a new __kflagstab section. This section stores symbol flags, such as the GPL-only flag, as an 8-bit bitset for each exported symbol. This is a cleanup that simplifies symbol lookup in the module loader by avoiding table fragmentation and will allow a cleaner way to add more flags later if needed. Module signature UAPI: - Move struct module_signature to the UAPI headers to allow reuse by tools outside the kernel proper, such as kmod and scripts/sign-file. This also renames a few constants for clarity and drops unused signature types as preparation for hash-based module integrity checking work that's in progress. Sysfs: - Add a /sys/module/<module>/import_ns sysfs attribute to show the symbol namespaces imported by loaded modules. This makes it easier to verify driver API access at runtime on systems that care about such things (e.g. Android). Cleanups and fixes: - Force sh_addr to 0 for all sections in module.lds. This prevents non-zero section addresses when linking modules with 'ld.bfd -r', which confused elfutils. - Fix a memory leak of charp module parameters on module unload when the kernel is configured with CONFIG_SYSFS=n. - Override the -EEXIST error code returned by module_init() to userspace. This prevents confusion with the errno reserved by the module loader to indicate that a module is already loaded. - Simplify the warning message and drop the stack dump on positive returns from module_init(). - Drop unnecessary extern keywords from function declarations and synchronize parse_args() arguments with their implementation" * tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (23 commits) module: Simplify warning on positive returns from module_init() module: Override -EEXIST module return documentation: remove references to *_gpl sections module: remove *_gpl sections from vmlinux and modules module: deprecate usage of *_gpl sections in module loader module: use kflagstab instead of *_gpl sections module: populate kflagstab in modpost module: add kflagstab section to vmlinux and modules module: define ksym_flags enumeration to represent kernel symbol flags selftests/bpf: verify_pkcs7_sig: Use 'struct module_signature' from the UAPI headers sign-file: use 'struct module_signature' from the UAPI headers tools uapi headers: add linux/module_signature.h module: Move 'struct module_signature' to UAPI module: Give MODULE_SIG_STRING a more descriptive name module: Give 'enum pkey_id_type' a more specific name module: Drop unused signature types extract-cert: drop unused definition of PKEY_ID_PKCS7 docs: symbol-namespaces: mention sysfs attribute module: expose imported namespaces via sysfs module: Remove extern keyword from param prototypes ... 2026-04-13T09:49:54+00:00 Paolo Bonzini pbonzini@redhat.com 2026-04-13T09:49:54+00:00 urn:sha1:e74c3a8891c05f88eeb87121de7e12dc95766a4a KVM/arm64 updates for 7.1 * New features: - Add support for tracing in the standalone EL2 hypervisor code, which should help both debugging and performance analysis. This comes with a full infrastructure for 'remote' trace buffers that can be exposed by non-kernel entities such as firmware. - Add support for GICv5 Per Processor Interrupts (PPIs), as the starting point for supporting the new GIC architecture in KVM. - Finally add support for pKVM protected guests, with anonymous memory being used as a backing store. About time! * Improvements and bug fixes: - Rework the dreaded user_mem_abort() function to make it more maintainable, reducing the amount of state being exposed to the various helpers and rendering a substantial amount of state immutable. - Expand the Stage-2 page table dumper to support NV shadow page tables on a per-VM basis. - Tidy up the pKVM PSCI proxy code to be slightly less hard to follow. - Fix both SPE and TRBE in non-VHE configurations so that they do not generate spurious, out of context table walks that ultimately lead to very bad HW lockups. - A small set of patches fixing the Stage-2 MMU freeing in error cases. - Tighten-up accepted SMC immediate value to be only #0 for host SMCCC calls. - The usual cleanups and other selftest churn. 2026-04-10T01:21:45+00:00 Daniel Borkmann daniel@iogearbox.net 2026-04-02T23:10:18+00:00 urn:sha1:7789c6bb76acf21539c2c74b0cc869bb57de99e6 Add a ynl netdev family operation called queue-create that creates a new queue on a netdevice: name: queue-create attribute-set: queue flags: [admin-perm] do: request: attributes: - ifindex - type - lease reply: &queue-create-op attributes: - id This is a generic operation such that it can be extended for various use cases in future. Right now it is mandatory to specify ifindex, the queue type which is enforced to rx and a lease. The newly created queue id is returned to the caller. A queue from a virtual device can have a lease which refers to another queue from a physical device. This is useful for memory providers and AF_XDP operations which take an ifindex and queue id to allow applications to bind against virtual devices in containers. The lease couples both queues together and allows to proxy the operations from a virtual device in a container to the physical device. In future, the nested lease attribute can be lifted and made optional for other use-cases such as dynamic queue creation for physical netdevs. The lack of lease and the specification of the physical device as an ifindex will imply that we need a real queue to be allocated. Similarly, the queue type enforcement to rx can then be lifted as well to support tx. An early implementation had only driver-specific integration [0], but in order for other virtual devices to reuse, it makes sense to have this as a generic API in core net. For leasing queues, the virtual netdev must have real_num_rx_queues less than num_rx_queues at the time of calling queue-create. The queue-type must be rx as only rx queues are supported for leasing for now. We also enforce that the queue-create ifindex must point to a virtual device, and that the nested lease attribute's ifindex must point to a physical device. The nested lease attribute set contains a netns-id attribute which is optional and can specify a netns-id relative to the caller's netns. It requires cap_net_admin and if the netns-id attribute is not specified, the lease ifindex will be retrieved from the current netns. Also, it is modeled as an s32 type similarly as done elsewhere in the stack. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Co-developed-by: David Wei <dw@davidwei.uk> Signed-off-by: David Wei <dw@davidwei.uk> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://bpfconf.ebpf.io/bpfconf2025/bpfconf2025_material/lsfmmbpf_2025_netkit_borkmann.pdf [0] Link: https://patch.msgid.link/20260402231031.447597-2-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2026-04-03T15:14:13+00:00 Alexei Starovoitov ast@kernel.org 2026-04-03T15:12:58+00:00 urn:sha1:891a05ccba927050cee17eb90c74692fe083ddaf Cross-merge BPF and other fixes after downstream PR. Minor conflict in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@kernel.org> 2026-03-31T22:46:34+00:00 Eyal Birger eyal.birger@gmail.com 2026-03-31T13:06:12+00:00 urn:sha1:f9a80c7ce49e2a77b769264712fe2f59479b5f5a Clarify bpf_ringbuf_discard() documentation for BPF_RB_NO_WAKEUP. Discarded ring buffer records are still left in the ring buffer and are only skipped when user space consumes them. This can matter when BPF_RB_NO_WAKEUP is used: a later submit relying on adaptive wakeup might not wake the consumer, because the discarded record still needs to be consumed first. Scenario: epoll_wait(rb_fd); // blocks rec = bpf_ringbuf_reserve(&rb, ...); bpf_ringbuf_discard(rec, BPF_RB_NO_WAKEUP); rec = bpf_ringbuf_reserve(&rb, ...); bpf_ringbuf_submit(rec, 0); // valid record, but no wakeup Document this in bpf_ringbuf_discard() to make the interaction between discarded records, user-space consumption, and adaptive wakeups explicit. Reported-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20260331130612.3762433-1-eyal.birger@gmail.com ---- v2: adapt wording per feedback from Andrii.