lwn.git/net/bluetooth/hci_event.c, branch v4.5.3

Bluetooth: Change eir_has_data_type() to more generic eir_get_data()

2016-01-05T16:02:49+00:00

To make the EIR parsing helper more general purpose, make it return the found data and its length rather than just saying whether the data was present or not. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann

Bluetooth: Move advertising instance management to hci_request.c

2015-12-09T23:51:47+00:00

This paves the way for eventually performing advertising changes through the hdev->req_workqueue. Some new APIs need to be exposed from mgmt.c to hci_request.c and vice-versa, but many of them will go away once hdev->req_workqueue gets used. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann

Bluetooth: Run page scan updates through hdev->req_workqueue

2015-12-09T23:51:47+00:00

Since Add/Remove Device perform the page scan updates independently from the HCI command completion we've introduced a potential race when multiple mgmt commands are queued. Doing the page scan updates through the req_workqueue ensures that the state changes are performed in a race-free manner. At the same time, to make the request helper more widely usable, extend it to also cover Inquiry Scan changes since those are behind the same HCI command. This is also reflected in the new name of the API as well as the work struct name. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann

Bluetooth: Rename bt_cb()->req into bt_cb()->hci

2015-10-26T06:21:03+00:00

The SKB context buffer for HCI request is really not just for requests, information in their are preserved for the whole HCI layer. So it makes more sense to actually rename it into bt_cb()->hci and also call it then struct hci_ctrl. In addition that allows moving the decoded opcode for outgoing packets into that struct. So far it was just consuming valuable space from the main shared items. And opcode are not valid for L2CAP packets. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg

Bluetooth: Use hci_conn_hash_lookup_le() when possible

2015-10-21T16:38:22+00:00

Use the new hci_conn_hash_lookup_le() API to look up LE connections. This way we're guaranteed exact matches that also take into account the address type. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-10-20T13:08:27+00:00

Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller

Bluetooth: Fix LE reconnection logic

2015-10-16T07:24:41+00:00

We can't use hci_explicit_connect_lookup() since that would only cover explicit connections, leaving normal reconnections completely untouched. Not using it in turn means leaving out entries in pend_le_reports. To fix this and simplify the logic move conn params from the reports list to the pend_le_conns list for the duration of an explicit connect. Once the connect is complete move the params back to the pend_le_reports list. This also means that the explicit connect lookup function only needs to look into the pend_le_conns list. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann

Bluetooth: Fix double scan updates

2015-10-16T07:24:41+00:00

When disable/enable scan command is issued twice, some controllers will return an error for the second request, i.e. requests with this command will fail on some controllers, and succeed on others. This patch makes sure that unnecessary scan disable/enable commands are not issued. When adding device to the auto connect whitelist when there is pending connect attempt, there is no need to update scan. hci_connect_le_scan_cleanup is conditionally executing hci_conn_params_del, that is calling hci_update_background_scan. Make the other case also update scan, and remove reduntand call from hci_connect_le_scan_remove. When stopping interleaved discovery the state should be set to stopped only when both LE scanning and discovery has stopped. Signed-off-by: Jakub Pawlowski Acked-by: Johan Hedberg Signed-off-by: Marcel Holtmann

Bluetooth: Fix reporting incorrect EIR in device found mgmt event

2015-09-18T07:53:20+00:00

Some remote devices (ie Gigaset G-Tag) misbehave with ADV data length. This can lead to incorrect EIR format in device found event when ADV_DATA and SCAN_RSP are merged (terminator field before SCAN_RSP part). Fix this by inspecting ADV_DATA and correct its length if terminator is found. > HCI Event: LE Meta Event (0x3e) plen 42 [hci0] 32.172182 LE Advertising Report (0x02) Num reports: 1 Event type: Connectable undirected - ADV_IND (0x00) Address type: Public (0x00) Address: 7C:2F:80:94:97:5A (Gigaset Communications GmbH) Data length: 30 Flags: 0x06 LE General Discoverable Mode BR/EDR Not Supported Company: Gigaset Communications GmbH (384) Data: 021512348094975abbc5 16-bit Service UUIDs (partial): 1 entry Battery Service (0x180f) RSSI: -65 dBm (0xbf) > HCI Event: LE Meta Event (0x3e) plen 27 [hci0] 32.172191 LE Advertising Report (0x02) Num reports: 1 Event type: Scan response - SCAN_RSP (0x04) Address type: Public (0x00) Address: 7C:2F:80:94:97:5A (Gigaset Communications GmbH) Data length: 15 Name (complete): Gigaset G-tag RSSI: -59 dBm (0xc5) Note "Data length: 30" in ADV_DATA which results in 9 extra zero bytes after Battery Service UUID. Terminator field present in the middle of EIR in Device Found event resulted in userspace stop parsing EIR and skipping device name. @ Device Found: 7C:2F:80:94:97:5A (1) rssi -59 flags 0x0000 02 01 06 0d ff 80 01 02 15 12 34 80 94 97 5a bb ..........4...Z. c5 03 02 0f 18 00 00 00 00 00 00 00 00 00 0e 09 ................ 47 69 67 61 73 65 74 20 47 2d 74 61 67 Gigaset G-tag With this fix EIR with merged ADV_DATA and SCAN_RSP in device found event is properly formatted: @ Device Found: 7C:2F:80:94:97:5A (1) rssi -59 flags 0x0000 02 01 06 0d ff 80 01 02 15 12 34 80 94 97 5a bb ..........4...Z. c5 03 02 0f 18 0e 09 47 69 67 61 73 65 74 20 47 .......Gigaset G 2d 74 61 67 -tag Signed-off-by: Szymon Janc Signed-off-by: Marcel Holtmann

Bluetooth: Fix SCO link type handling on connection complete

2015-08-28T19:03:00+00:00

Synchronous connections are initially created with type eSCO. Link manager may reject proposed link parameters, which triggers connection setup retry with a different set. Link type embedded in responses should be disregarded until Synchronous Connect Complete returns Success (0x00). Current code updates link type every time which creates an issue when link type changes to SCO and back to eSCO on further attepts. Issue happens with BlackBerry 9100 and 9700 with Intel WilkinsPeak on third connection setup attept 2015-05-18 01:27:57.332242 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x0380 2015-05-18 01:27:57.333604 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2015-05-18 01:27:57.334614 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x1a handle 0 bdaddr 30:7C:30:B3:A8:86 type SCO Error: Unsupported Remote Feature / Unsupported LMP Feature 2015-05-18 01:27:57.334895 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x0380 2015-05-18 01:27:57.335601 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2015-05-18 01:27:57.336610 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x1a handle 0 bdaddr 30:7C:30:B3:A8:86 type SCO Error: Unsupported Remote Feature / Unsupported LMP Feature 2015-05-18 01:27:57.336685 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x03c8 2015-05-18 01:27:57.337603 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2015-05-18 01:27:57.342608 > HCI Event: Max Slots Change (0x1b) plen 3 handle 256 slots 1 2015-05-18 01:27:57.377631 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x00 handle 257 bdaddr 30:7C:30:B3:A8:86 type eSCO Air mode: CVSD Signed-off-by: Kuba Pawlak Signed-off-by: Marcel Holtmann