lwn.git/kernel, branch docs-4.15

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-09-23T15:41:27+00:00

Pull networking fixes from David Miller: 1) Fix NAPI poll list corruption in enic driver, from Christian Lamparter. 2) Fix route use after free, from Eric Dumazet. 3) Fix regression in reuseaddr handling, from Josef Bacik. 4) Assert the size of control messages in compat handling since we copy it in from userspace twice. From Meng Xu. 5) SMC layer bug fixes (missing RCU locking, bad refcounting, etc.) from Ursula Braun. 6) Fix races in AF_PACKET fanout handling, from Willem de Bruijn. 7) Don't use ARRAY_SIZE on spinlock array which might have zero entries, from Geert Uytterhoeven. 8) Fix miscomputation of checksum in ipv6 udp code, from Subash Abhinov Kasiviswanathan. 9) Push the ipv6 header properly in ipv6 GRE tunnel driver, from Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits) inet: fix improper empty comparison net: use inet6_rcv_saddr to compare sockets net: set tb->fast_sk_family net: orphan frags on stand-alone ptype in dev_queue_xmit_nit MAINTAINERS: update git tree locations for ieee802154 subsystem net: prevent dst uses after free net: phy: Fix truncation of large IRQ numbers in phy_attached_print() net/smc: no close wait in case of process shut down net/smc: introduce a delay net/smc: terminate link group if out-of-sync is received net/smc: longer delay for client link group removal net/smc: adapt send request completion notification net/smc: adjust net_device refcount net/smc: take RCU read lock for routing cache lookup net/smc: add receive timeout check net/smc: add missing dev_put net: stmmac: Cocci spatch "of_table" lan78xx: Use default values loaded from EEPROM/OTP after reset lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE lan78xx: Fix for eeprom read/write when device auto suspend ...

Merge tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2017-09-23T02:16:41+00:00

Pull seccomp updates from Kees Cook: "Major additions: - sysctl and seccomp operation to discover available actions (tyhicks) - new per-filter configurable logging infrastructure and sysctl (tyhicks) - SECCOMP_RET_LOG to log allowed syscalls (tyhicks) - SECCOMP_RET_KILL_PROCESS as the new strictest possible action - self-tests for new behaviors" [ This is the seccomp part of the security pull request during the merge window that was nixed due to unrelated problems - Linus ] * tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: samples: Unrename SECCOMP_RET_KILL selftests/seccomp: Test thread vs process killing seccomp: Implement SECCOMP_RET_KILL_PROCESS action seccomp: Introduce SECCOMP_RET_KILL_PROCESS seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD seccomp: Action to log before allowing seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW seccomp: Selftest for detection of filter flag support seccomp: Sysctl to configure actions that are allowed to be logged seccomp: Operation for checking if an action is available seccomp: Sysctl to display available actions seccomp: Provide matching filter for introspection selftests/seccomp: Refactor RET_ERRNO tests selftests/seccomp: Add simple seccomp overhead benchmark selftests/seccomp: Add tests for basic ptrace actions

bpf: one perf event close won't free bpf program attached by another perf event

2017-09-20T21:10:29+00:00

This patch fixes a bug exhibited by the following scenario: 1. fd1 = perf_event_open with attr.config = ID1 2. attach bpf program prog1 to fd1 3. fd2 = perf_event_open with attr.config = ID1 4. user program closes fd2 and prog1 is detached from the tracepoint. 5. user program with fd1 does not work properly as tracepoint no output any more. The issue happens at step 4. Multiple perf_event_open can be called successfully, but only one bpf prog pointer in the tp_event. In the current logic, any fd release for the same tp_event will free the tp_event->prog. The fix is to free tp_event->prog only when the closing fd corresponds to the one which registered the program. Signed-off-by: Yonghong Song Signed-off-by: David S. Miller

Merge tag 'trace-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2017-09-20T16:38:07+00:00

Pull tracing fixes from Steven Rostedt: "This includes three minor fixes. - Have writing to trace file clear the irqsoff (and friends) tracer - trace_pipe behavior for instance buffers was different than top buffer - Show a message of why mmiotrace doesn't start from commandline" * tag 'trace-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix trace_pipe behavior for instance traces tracing: Ignore mmiotrace from kernel commandline tracing: Erase irqsoff trace with empty write

bpf: fix ri->map_owner pointer on bpf_prog_realloc

2017-09-19T23:38:53+00:00

Commit 109980b894e9 ("bpf: don't select potentially stale ri->map from buggy xdp progs") passed the pointer to the prog itself to be loaded into r4 prior on bpf_redirect_map() helper call, so that we can store the owner into ri->map_owner out of the helper. Issue with that is that the actual address of the prog is still subject to change when subsequent rewrites occur that require slow path in bpf_prog_realloc() to alloc more memory, e.g. from patching inlining helper functions or constant blinding. Thus, we really need to take prog->aux as the address we're holding, which also works with prog clones as they share the same aux object. Instead of then fetching aux->prog during runtime, which could potentially incur cache misses due to false sharing, we are going to just use aux for comparison on the map owner. This will also keep the patchlet of the same size, and later check in xdp_map_invalid() only accesses read-only aux pointer from the prog, it's also in the same cacheline already from prior access when calling bpf_func. Fixes: 109980b894e9 ("bpf: don't select potentially stale ri->map from buggy xdp progs") Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller

bpf: do not disable/enable BH in bpf_map_free_id()

2017-09-19T22:42:54+00:00

syzkaller reported following splat [1] Since hard irq are disabled by the caller, bpf_map_free_id() should not try to enable/disable BH. Another solution would be to change htab_map_delete_elem() to defer the free_htab_elem() call after raw_spin_unlock_irqrestore(&b->lock, flags), but this might be not enough to cover other code paths. [1] WARNING: CPU: 1 PID: 8052 at kernel/softirq.c:161 __local_bh_enable_ip +0x1e/0x160 kernel/softirq.c:161 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 8052 Comm: syz-executor1 Not tainted 4.13.0-next-20170915+ #23 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x417 kernel/panic.c:181 __warn+0x1c4/0x1d9 kernel/panic.c:542 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:178 do_trap_no_signal arch/x86/kernel/traps.c:212 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:261 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:298 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:311 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:__local_bh_enable_ip+0x1e/0x160 kernel/softirq.c:161 RSP: 0018:ffff8801cdcd7748 EFLAGS: 00010046 RAX: 0000000000000082 RBX: 0000000000000201 RCX: 0000000000000000 RDX: 1ffffffff0b5933c RSI: 0000000000000201 RDI: ffffffff85ac99e0 RBP: ffff8801cdcd7758 R08: ffffffff85b87158 R09: 1ffff10039b9aec6 R10: ffff8801c99f24c0 R11: 0000000000000002 R12: ffffffff817b0b47 R13: dffffc0000000000 R14: ffff8801cdcd77e8 R15: 0000000000000001 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:176 [inline] _raw_spin_unlock_bh+0x30/0x40 kernel/locking/spinlock.c:207 spin_unlock_bh include/linux/spinlock.h:361 [inline] bpf_map_free_id kernel/bpf/syscall.c:197 [inline] __bpf_map_put+0x267/0x320 kernel/bpf/syscall.c:227 bpf_map_put+0x1a/0x20 kernel/bpf/syscall.c:235 bpf_map_fd_put_ptr+0x15/0x20 kernel/bpf/map_in_map.c:96 free_htab_elem+0xc3/0x1b0 kernel/bpf/hashtab.c:658 htab_map_delete_elem+0x74d/0x970 kernel/bpf/hashtab.c:1063 map_delete_elem kernel/bpf/syscall.c:633 [inline] SYSC_bpf kernel/bpf/syscall.c:1479 [inline] SyS_bpf+0x2188/0x46a0 kernel/bpf/syscall.c:1451 entry_SYSCALL_64_fastpath+0x1f/0xbe Fixes: f3f1c054c288 ("bpf: Introduce bpf_map ID") Signed-off-by: Eric Dumazet Cc: Martin KaFai Lau Acked-by: Martin KaFai Lau Acked-by: Daniel Borkmann Signed-off-by: David S. Miller

tracing: Fix trace_pipe behavior for instance traces

2017-09-19T22:33:42+00:00

When reading data from trace_pipe, tracing_wait_pipe() performs a check to see if tracing has been turned off after some data was read. Currently, this check always looks at global trace state, but it should be checking the trace instance where trace_pipe is located at. Because of this bug, cat instances/i1/trace_pipe in the following script will immediately exit instead of waiting for data: cd /sys/kernel/debug/tracing echo 0 > tracing_on mkdir -p instances/i1 echo 1 > instances/i1/tracing_on echo 1 > instances/i1/events/sched/sched_process_exec/enable cat instances/i1/trace_pipe Link: http://lkml.kernel.org/r/20170917102348.1615-1-tahsin@google.com Cc: stable@vger.kernel.org Fixes: 10246fa35d4f ("tracing: give easy way to clear trace buffer") Signed-off-by: Tahsin Erdogan Signed-off-by: Steven Rostedt (VMware)

tracing: Ignore mmiotrace from kernel commandline

2017-09-19T16:36:01+00:00

The mmiotrace tracer cannot be enabled with ftrace=mmiotrace in kernel commandline. With this patch, noboot is added to the tracer struct, and when system boot with a tracer that has noboot=true, it will print out a warning message and continue booting. Link: http://lkml.kernel.org/r/1505111195-31942-1-git-send-email-zsun@redhat.com Signed-off-by: Ziqian SUN (Zamir) Signed-off-by: Steven Rostedt (VMware)

tracing: Erase irqsoff trace with empty write

2017-09-19T16:25:28+00:00

One convenient way to erase trace is "echo > trace". However, this is currently broken if the current tracer is irqsoff tracer. This is because irqsoff tracer use max_buffer as the default trace buffer. Set the max_buffer as the one to be cleared when it's the trace buffer currently in use. Link: http://lkml.kernel.org/r/1505754215-29411-1-git-send-email-byan@nvidia.com Cc: Cc: stable@vger.kernel.org Fixes: 4acd4d00f ("tracing: give easy way to clear trace buffer") Signed-off-by: Bo Yan Signed-off-by: Steven Rostedt (VMware)

bpf: devmap: pass on return value of bpf_map_precharge_memlock

2017-09-18T23:53:30+00:00

If bpf_map_precharge_memlock in dev_map_alloc, -ENOMEM is returned regardless of the actual error produced by bpf_map_precharge_memlock. Fix it by passing on the error returned by bpf_map_precharge_memlock. Also return -EINVAL instead of -ENOMEM if the page count overflow check fails. This makes dev_map_alloc match the behavior of other bpf maps' alloc functions wrt. return values. Signed-off-by: Tobias Klauser Acked-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller