lwn.git/include/uapi/linux, branch standardize-docs

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2017-07-13T21:27:32+00:00

Pull SCSI target updates from Nicholas Bellinger: "It's been usually busy for summer, with most of the efforts centered around TCMU developments and various target-core + fabric driver bug fixing activities. Not particularly large in terms of LoC, but lots of smaller patches from many different folks. The highlights include: - ibmvscsis logical partition manager support (Michael Cyr + Bryant Ly) - Convert target/iblock WRITE_SAME to blkdev_issue_zeroout (hch + nab) - Add support for TMR percpu LUN reference counting (nab) - Fix a potential deadlock between EXTENDED_COPY and iscsi shutdown (Bart) - Fix COMPARE_AND_WRITE caw_sem leak during se_cmd quiesce (Jiang Yi) - Fix TMCU module removal (Xiubo Li) - Fix iser-target OOPs during login failure (Andrea Righi + Sagi) - Breakup target-core free_device backend driver callback (mnc) - Perform TCMU add/delete/reconfig synchronously (mnc) - Fix TCMU multiple UIO open/close sequences (mnc) - Fix TCMU CHECK_CONDITION sense handling (mnc) - Fix target-core SAM_STAT_BUSY + TASK_SET_FULL handling (mnc + nab) - Introduce TYPE_ZBC support in PSCSI (Damien Le Moal) - Fix possible TCMU memory leak + OOPs when recalculating cmd base size (Xiubo Li + Bryant Ly + Damien Le Moal + mnc) - Add login_keys_workaround attribute for non RFC initiators (Robert LeBlanc + Arun Easi + nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (68 commits) iscsi-target: Add login_keys_workaround attribute for non RFC initiators Revert "qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT" tcmu: clean up the code and with one small fix tcmu: Fix possbile memory leak / OOPs when recalculating cmd base size target: export lio pgr/alua support as device attr target: Fix return sense reason in target_scsi3_emulate_pr_out target: Fix cmd size for PR-OUT in passthrough_parse_cdb tcmu: Fix dev_config_store target: pscsi: Introduce TYPE_ZBC support target: Use macro for WRITE_VERIFY_32 operation codes target: fix SAM_STAT_BUSY/TASK_SET_FULL handling target: remove transport_complete pscsi: finish cmd processing from pscsi_req_done tcmu: fix sense handling during completion target: add helper to copy sense to se_cmd buffer target: do not require a transport_complete for SCF_TRANSPORT_TASK_SENSE target: make device_mutex and device_list static tcmu: Fix flushing cmd entry dcache page tcmu: fix multiple uio open/close sequences tcmu: drop configured check in destroy ...

include/linux/sem.h: correctly document sem_ctime

2017-07-12T23:26:01+00:00

sem_ctime is initialized to the semget() time and then updated at every semctl() that changes the array. Thus it does not represent the time of the last change. Especially, semop() calls are only stored in sem_otime, not in sem_ctime. This is already described in ipc/sem.c, I just overlooked that there is a comment in include/linux/sem.h and man semctl(2) as well. So: Correct wrong comments. Link: http://lkml.kernel.org/r/20170515171912.6298-4-manfred@colorfullife.com Signed-off-by: Manfred Spraul Cc: Kees Cook Cc: <1vier1@web.de> Cc: Davidlohr Bueso Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Fabian Frederick Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kcmp: add KCMP_EPOLL_TFD mode to compare epoll target files

2017-07-12T23:26:01+00:00

With current epoll architecture target files are addressed with file_struct and file descriptor number, where the last is not unique. Moreover files can be transferred from another process via unix socket, added into queue and closed then so we won't find this descriptor in the task fdinfo list. Thus to checkpoint and restore such processes CRIU needs to find out where exactly the target file is present to add it into epoll queue. For this sake one can use kcmp call where some particular target file from the queue is compared with arbitrary file passed as an argument. Because epoll target files can have same file descriptor number but different file_struct a caller should explicitly specify the offset within. To test if some particular file is matching entry inside epoll one have to - fill kcmp_epoll_slot structure with epoll file descriptor, target file number and target file offset (in case if only one target is present then it should be 0) - call kcmp as kcmp(pid1, pid2, KCMP_EPOLL_TFD, fd, &kcmp_epoll_slot) - the kernel fetch file pointer matching file descriptor @fd of pid1 - lookups for file struct in epoll queue of pid2 and returns traditional 0,1,2 result for sorting purpose Link: http://lkml.kernel.org/r/20170424154423.511592110@gmail.com Signed-off-by: Cyrill Gorcunov Acked-by: Andrey Vagin Cc: Al Viro Cc: Pavel Emelyanov Cc: Michael Kerrisk Cc: Jason Baron Cc: Andy Lutomirski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Fix up over-eager 'wait_queue_t' renaming

2017-07-10T18:40:19+00:00

Commit ac6424b981bc ("sched/wait: Rename wait_queue_t => wait_queue_entry_t") had scripted the renaming incorrectly, and didn't actually check that the 'wait_queue_t' was a full token. As a result, it also triggered on 'wait_queue_token', and renamed that to 'wait_queue_entry_token' entry in the autofs4 packet structure definition too. That was entirely incorrect, and not intended. The end result built fine when building just the kernel - because everything had been renamed consistently there - but caused problems in user space because the "struct autofs_packet_missing" type is exported as part of the uapi. This scripts it all back again: git grep -lw wait_queue_entry_token | xargs sed -i 's/wait_queue_entry_token/wait_queue_token/g' and checks the end result. Reported-by: Florian Fainelli Acked-by: Ingo Molnar Fixes: ac6424b981bc ("sched/wait: Rename wait_queue_t => wait_queue_entry_t") Signed-off-by: Linus Torvalds

Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-07-09T17:52:16+00:00

Pull scheduler fixes from Thomas Gleixner: "This scheduler update provides: - The (hopefully) final fix for the vtime accounting issues which were around for quite some time - Use types known to user space in UAPI headers to unbreak user space builds - Make load balancing respect the current scheduling domain again instead of evaluating unrelated CPUs" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/headers/uapi: Fix linux/sched/types.h userspace compilation errors sched/fair: Fix load_balance() affinity redo path sched/cputime: Accumulate vtime on top of nsec clocksource sched/cputime: Move the vtime task fields to their own struct sched/cputime: Rename vtime fields sched/cputime: Always set tsk->vtime_snap_whence after accounting vtime vtime, sched/cputime: Remove vtime_account_user() Revert "sched/cputime: Refactor the cputime_adjust() code"

Merge tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt

2017-07-09T16:03:31+00:00

Pull fscrypt updates from Ted Ts'o: "Add support for 128-bit AES and some cleanups to fscrypt" * tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: fscrypt: make ->dummy_context() return bool fscrypt: add support for AES-128-CBC fscrypt: inline fscrypt_free_filename()

Merge tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2017-07-08T22:51:57+00:00

Pull PCI updates from Bjorn Helgaas: - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee Khee) - make host bridge IRQ mapping much more generic (Matthew Minter, Lorenzo Pieralisi) - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo Pieralisi) - mutex sriov_configure() (Jakub Kicinski) - mutex pci_error_handlers callbacks (Christoph Hellwig) - split ->reset_notify() into ->reset_prepare()/reset_done() (Christoph Hellwig) - support multiple PCIe portdrv interrupts for MSI as well as MSI-X (Gabriele Paoloni) - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele Paoloni) - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez) - test INTx masking during enumeration, not at run-time (Piotr Gregor) - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki) - restore the status of PCI devices across hibernation (Chen Yu) - keep parent resources that start at 0x0 (Ard Biesheuvel) - enable ECRC only if device supports it (Bjorn Helgaas) - restore PRI and PASID state after Function-Level Reset (CQ Tang) - skip DPC event if device is not present (Keith Busch) - check domain when matching SMBIOS info (Sujith Pandel) - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson) - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng) - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas) - add Switchtec "running" status flag (Logan Gunthorpe) - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav) - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar Gogada) - move VMD SRCU cleanup after bus, child device removal (Jon Derrick) - add Faraday clock handling (Linus Walleij) - configure Rockchip MPS and reorganize (Shawn Lin) - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla) - support Tegra MSI 64-bit addressing (Thierry Reding) - use Rockchip normal (not privileged) register bank (Shawn Lin) - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song) - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc Gonzalez) - add MediaTek PCIe host controller support (Ryder Lee) - add Qualcomm IPQ4019 support (John Crispin) - add HyperV vPCI protocol v1.2 support (Jork Loeser) - add i.MX6 regulator support (Quentin Schulz) * tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller PCI: rockchip: Use normal register bank for config accessors dt-bindings: PCI: Add documentation for MediaTek PCIe PCI: Remove __pci_dev_reset() and pci_dev_reset() PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done() PCI: xilinx: Make of_device_ids const PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts PCI: vmd: Move SRCU cleanup after bus, child device removal PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000 PCI: versatile: Add local struct device pointers PCI: tegra: Do not allocate MSI target memory PCI: tegra: Support MSI 64-bit addressing PCI: rockchip: Use local struct device pointer consistently PCI: rockchip: Check for clk_prepare_enable() errors during resume MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer PCI: rockchip: Configure RC's MPS setting PCI: rockchip: Reconfigure configuration space header type PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses() PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu() ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2017-07-08T19:39:37+00:00

Pull input updates from Dmitry Torokhov: - a new driver for STM FingerTip touchscreen - a new driver for D-Link DIR-685 touch keys - updated list of supported devices in xpad driver - other assorted updates and fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (23 commits) MAINTAINERS: update input subsystem patterns Input: introduce KEY_ASSISTANT Input: xpad - sync supported devices with XBCD Input: xpad - sync supported devices with 360Controller Input: xen-kbdfront - use string constants from PV protocol Input: stmfts - mark all PM functions as __maybe_unused Input: add support for the STMicroelectronics FingerTip touchscreen Input: add D-Link DIR-685 touchkeys driver Input: s3c2410_ts - handle return value of clk_prepare_enable Input: axp20x-pek - add wakeup support Input: synaptics-rmi4 - use %phN to form F34 configuration ID Input: synaptics-rmi4 - change a char type to u8 Input: sparse-keymap - remove sparse_keymap_free() Input: tsc2007 - move header file out of I2C realm Input: mms114 - move header file out of I2C realm Input: mcs - move header file out of I2C realm Input: lm8323 - move header file out of I2C realm Input: elantech - force relative mode on a certain module Input: elan_i2c - add support for fetching chip type on newer hardware Input: elan_i2c - check if device is there before really probing ...

sched/headers/uapi: Fix linux/sched/types.h userspace compilation errors

2017-07-08T09:17:55+00:00

Consistently use types provided by to fix the following linux/sched/types.h userspace compilation errors: /usr/include/linux/sched/types.h:57:2: error: unknown type name 'u32' u32 size; ... u64 sched_period; Signed-off-by: Dmitry V. Levin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: stable@vger.kernel.org # v4.12 Fixes: e2d1e2aec572 ("sched/headers: Move various ABI definitions to ") Link: http://lkml.kernel.org/r/20170705162328.GA11026@altlinux.org Signed-off-by: Ingo Molnar

Merge tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

2017-07-07T16:44:06+00:00

Pull libnvdimm updates from Dan Williams: "libnvdimm updates for the latest ACPI and UEFI specifications. This pull request also includes new 'struct dax_operations' enabling to undo the abuse of copy_user_nocache() for copy operations to pmem. The dax work originally missed 4.12 to address concerns raised by Al. Summary: - Introduce the _flushcache() family of memory copy helpers and use them for persistent memory write operations on x86. The _flushcache() semantic indicates that the cache is either bypassed for the copy operation (movnt) or any lines dirtied by the copy operation are written back (clwb, clflushopt, or clflush). - Extend dax_operations with ->copy_from_iter() and ->flush() operations. These operations and other infrastructure updates allow all persistent memory specific dax functionality to be pushed into libnvdimm and the pmem driver directly. It also allows dax-specific sysfs attributes to be linked to a host device, for example: /sys/block/pmem0/dax/write_cache - Add support for the new NVDIMM platform/firmware mechanisms introduced in ACPI 6.2 and UEFI 2.7. This support includes the v1.2 namespace label format, extensions to the address-range-scrub command set, new error injection commands, and a new BTT (block-translation-table) layout. These updates support inter-OS and pre-OS compatibility. - Fix a longstanding memory corruption bug in nfit_test. - Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2) capable. - Miscellaneous fixes and small updates across libnvdimm and the nfit driver. Acknowledgements that came after the branch was pushed: commit 6aa734a2f38e ("libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime") was reviewed by Toshi Kani " * tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (42 commits) libnvdimm, namespace: record 'lbasize' for pmem namespaces acpi/nfit: Issue Start ARS to retrieve existing records libnvdimm: New ACPI 6.2 DSM functions acpi, nfit: Show bus_dsm_mask in sysfs libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru. acpi, nfit: Enable DSM pass thru for root functions. libnvdimm: passthru functions clear to send libnvdimm, btt: convert some info messages to warn/err libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime libnvdimm: fix the clear-error check in nsio_rw_bytes libnvdimm, btt: fix btt_rw_page not returning errors acpi, nfit: quiet invalid block-aperture-region warnings libnvdimm, btt: BTT updates for UEFI 2.7 format acpi, nfit: constify *_attribute_group libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile region libnvdimm, pmem, dax: export a cache control attribute dax: convert to bitmask for flags dax: remove default copy_from_iter fallback libnvdimm, nfit: enable support for volatile ranges libnvdimm, pmem: fix persistence warning ...