lwn.git/include/linux/usb, branch docs-mw

Merge tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2026-04-19T15:47:40+00:00

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 7.1-rc1. Lots of little things in here, nothing major, just constant improvements, updates, and new features. Highlights are: - new USB power supply driver support. These changes did touch outside of drivers/usb/ but got acks from the relevant mantainers for them. - dts file updates and conversions - string function conversions into "safer" ones - new device quirks - xhci driver updates - usb gadget driver minor fixes - typec driver additions and updates - small number of thunderbolt driver changes - dwc3 driver updates and additions of new hardware support - other minor driver updates All of these have been in the linux-next tree for a while with no reported issues" * tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits) usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller dt-bindings: usb: dwc3: add support for StarFive JHB100 dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node drivers/usb/host: Fix spelling error 'seperate' -> 'separate' usbip: tools: add hint when no exported devices are found USB: serial: iuu_phoenix: fix iuutool author name usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb() usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete() usb: gadget: f_hid: Add missing error code usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding USB: of: Simplify with scoped for each OF child loop usbip: validate number_of_packets in usbip_pack_ret_submit() usb: gadget: renesas_usb3: validate endpoint index in standard request handlers usb: core: config: reverse the size check of the SSP isoc endpoint descriptor usb: typec: ucsi: Set usb mode on partner change ...

Merge tag 'media/v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2026-04-15T15:32:10+00:00

Pull media updates from Mauro Carvalho Chehab: - new CSI tegra support, covering Tegra20 and Tegra30 - new camera sensor drivers: T4ka3 and ov2732 - m88ds3103: add 3103c chip support - uvcvideo: add support for Intel RealSense D436/D555 and P010 pixel format - synopsys csi2rx: add i.MX93 support - imx8-isi: add i.MX95 support - imx8mq-mipi-csi2: add i.MX8ULP support - dw100: add V4L2 requests support - support for DTV devices from Hauppauge got some improvements - media staging: dropped starfive-camss driver - media docs: document multi-committers model and improve maint profile - media core: - add v4l2_subdev_get_frame_desc_passthrough() helper - improve error handling in fwnode parsing - lots of driver fixes, cleanups and improvements * tag 'media/v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (251 commits) Revert "media: cx231xx: add USB ID 2040:8360 for Hauppauge WinTV-HVR-935" media: synopsys: csi2rx: add i.MX93 support media: dt-bindings: add NXP i.MX93 compatible string media: synopsys: csi2rx: Use enum and u32 array for register offsets media: synopsys: csi2rx: implement .get_frame_desc() callback media: synopsys: csi2rx: only check errors from devm_clk_bulk_get_all() media: synopsys: csi2rx: use devm_reset_control_get_optional_exclusive() media: i2c: imx283: add support for non-continuous MIPI clock mode media: i2c: ov08d10: add support for 24 MHz input clock media: i2c: ov08d10: add support for reset and power management media: i2c: ov08d10: add support for binding via device tree dt-bindings: media: i2c: document Omnivision OV08D10 CMOS image sensor media: i2c: ov08d10: add missing newline to prints media: i2c: ov08d10: fix some typos in comments media: i2c: ov08d10: remove duplicate register write media: i2c: ov08d10: fix image vertical start setting media: i2c: ov08d10: fix runtime PM handling in probe staging: media: ipu7: Update TODO media: Add t4ka3 camera sensor driver media: i2c: Add ov2732 image sensor driver ...

media: uvcvideo: Add support for P010 pixel format

2026-03-25T08:40:28+00:00

Add support for the P010 (10-bit Y/UV 4:2:0) pixel format to the uvcvideo driver. This format is exposed by USB capture devices such as the Magewell USB Capture HDMI 4K Pro when capturing HDR10 content. P010 stores 10-bit Y and interleaved UV samples in 16-bit little-endian words, with data in the upper 10 bits and zeros in the lower 6 bits. This requires 2 bytes per sample, so bytesperline is wWidth * 2. V4L2_PIX_FMT_P010 was added to the V4L2 core in commit 5374d8fb75f3 ("media: Add P010 video format"). Based on the community DKMS patch from awawa-dev/P010_for_V4L2. Link: https://github.com/awawa-dev/P010_for_V4L2 Signed-off-by: Oliver Collyer Reviewed-by: Laurent Pinchart Link: https://patch.msgid.link/20251226065718.95504-1-ovcollyer@mac.com Signed-off-by: Laurent Pinchart Signed-off-by: Hans Verkuil

tcpm: Implement sink support for PD SPR AVS negotiation

2026-03-18T15:08:39+00:00

Add support to enable TCPM to negotiate with USB PD Standard Power Range Adjustable Voltage Supply (SPR AVS) when acting as a power sink. * Added support to the tcpm power supply properties, allowing userspace to enable and control the dynamic limits (voltage and current) specific to the SPR AVS contract. * Implemented tcpm_pd_select_spr_avs_apdo() to select the appropriate APDO and validate the requested voltage/current against both the Source and Sink capabilities. * Implemented tcpm_pd_build_spr_avs_request() to construct the Request Data Object (RDO) for SPR AVS. * Added SNK_NEGOTIATE_SPR_AVS_CAPABILITIES state to the state machine to handle negotiation for SPR AVS. * Updated the SNK_TRANSITION_SINK state to implement the SPR AVS-specific VBUS transition rules, including reducing current draw to PD_I_SNK_STBY_MA for large voltage changes, as required by USB PD spec. Log stub captured when enabling AVS: $ echo 3 > /sys/class/power_supply/tcpm-source-psy-1-0025/online $ cat /d/usb/tcpm-1-0025/log [ 358.895775] request to set AVS online [ 358.895792] AMS POWER_NEGOTIATION start [ 358.895806] state change SNK_READY -> AMS_START [rev3 POWER_NEGOTIATION] [ 358.895850] state change AMS_START -> SNK_NEGOTIATE_SPR_AVS_CAPABILITIES [rev3 POWER_NEGOTIATION] [ 358.895866] SPR AVS src_pdo_index:4 snk_pdo_index:2 req_op_curr_ma roundup:2200 req_out_volt_mv roundup:9000 [ 358.895880] Requesting APDO SPR AVS 4: 9000 mV, 2200 mA [ 358.896405] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:0 pps_apdo_min_volt:0 ret:0 [ 358.896422] PD TX, header: 0x1a82 [ 358.900158] PD TX complete, status: 0 [ 358.900205] pending state change SNK_NEGOTIATE_SPR_AVS_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev3 POWER_NEGOTIATION] [ 358.904832] PD RX, header: 0x1a3 [1] [ 358.904854] state change SNK_NEGOTIATE_SPR_AVS_CAPABILITIES -> SNK_TRANSITION_SINK [rev3 POWER_NEGOTIATION] [ 358.904888] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 700 ms [rev3 POWER_NEGOTIATION] [ 359.021530] PD RX, header: 0x3a6 [1] [ 359.021546] Setting voltage/current limit 9000 mV 2200 mA [ 359.023035] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9000 pps_apdo_min_volt:0 ret:0 [ 359.023053] state change SNK_TRANSITION_SINK -> SNK_READY [rev3 POWER_NEGOTIATION] [ 359.023090] AMS POWER_NEGOTIATION finished $ cat /sys/class/power_supply/tcpm-source-psy-1-0025/online 3 Log stub captured when increasing voltage: $ echo 9100000 > /sys/class/power_supply/tcpm-source-psy-1-0025/voltage_now $ cat /d/usb/tcpm-1-0025/log [ 632.116714] AMS POWER_NEGOTIATION start [ 632.116728] state change SNK_READY -> AMS_START [rev3 POWER_NEGOTIATION] [ 632.116779] state change AMS_START -> SNK_NEGOTIATE_SPR_AVS_CAPABILITIES [rev3 POWER_NEGOTIATION] [ 632.116798] SPR AVS src_pdo_index:4 snk_pdo_index:2 req_op_curr_ma roundup:2200 req_out_volt_mv roundup:9100 [ 632.116811] Requesting APDO SPR AVS 4: 9100 mV, 2200 mA [ 632.117315] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:0 pps_apdo_min_volt:0 ret:0 [ 632.117328] PD TX, header: 0x1c82 [ 632.121007] PD TX complete, status: 0 [ 632.121052] pending state change SNK_NEGOTIATE_SPR_AVS_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev3 POWER_NEGOTIATION] [ 632.124572] PD RX, header: 0x5a3 [1] [ 632.124594] state change SNK_NEGOTIATE_SPR_AVS_CAPABILITIES -> SNK_TRANSITION_SINK [rev3 POWER_NEGOTIATION] [ 632.124623] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 700 ms [rev3 POWER_NEGOTIATION] [ 632.149256] PD RX, header: 0x7a6 [1] [ 632.149271] Setting voltage/current limit 9100 mV 2200 mA [ 632.150770] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9100 pps_apdo_min_volt:0 ret:0 [ 632.150787] state change SNK_TRANSITION_SINK -> SNK_READY [rev3 POWER_NEGOTIATION] [ 632.150823] AMS POWER_NEGOTIATION finished $ cat /sys/class/power_supply/tcpm-source-psy-1-0025/voltage_now 9100000 Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Amit Sunil Dhamne Acked-by: Heikki Krogerus Link: https://patch.msgid.link/20260316150301.3892223-4-badhri@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: Document priority and mode_selection fields in struct typec_altmode

2026-03-18T15:07:29+00:00

The fields 'priority' and 'mode_selection' in struct typec_altmode are missing from the kernel-doc comment, which results in warnings when building the documentation with 'make htmldocs'. WARNING: ./include/linux/usb/typec_altmode.h:44 struct member 'priority' not described in 'typec_altmode' WARNING: ./include/linux/usb/typec_altmode.h:44 struct member 'mode_selection' not described in 'typec_altmode' Document both fields to keep the kernel-doc comment aligned with the structure definition. Signed-off-by: Aldo Conte Reviewed-by: Heikki Krogerus Link: https://patch.msgid.link/20260311163320.61534-1-aldocontelk@gmail.com Signed-off-by: Greg Kroah-Hartman

Merge 7.0-rc4 into usb-next

2026-03-16T10:50:48+00:00

We need the USB fixes in this branch as well to build on top of Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2026-03-14T16:43:12+00:00

Pull USB fixes from Greg KH: "Here is a large chunk of USB driver fixes for 7.0-rc4. Included in here are: - usb gadget reverts due to reported issues, and then a follow-on fix to hopefully resolve the reported overall problem - xhci driver fixes - dwc3 driver fixes - usb core "killable" bulk message api addition to fix a usbtmc driver bug where userspace could hang the driver for forever - small USB driver fixes for reported issues - new usb device quirks All except the last USB device quirk change have been in linux-next with no reported issues. That one came in too late, and is 'obviously correct' :)" * tag 'usb-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits) USB: ezcap401 needs USB_QUIRK_NO_BOS to function on 10gbs usb speed usb: roles: get usb role switch from parent only for usb-b-connector Revert "tcpm: allow looking for role_sw device in the main node" usb: gadget: f_ncm: Fix net_device lifecycle with device_move Revert "usb: gadget: u_ether: add gether_opts for config caching" Revert "usb: gadget: u_ether: use header file" Revert "usb: gadget: u_ether: Add auto-cleanup helper for freeing net_device" Revert "usb: gadget: f_ncm: align net_device lifecycle with bind/unbind" Revert "usb: legacy: ncm: Fix NPE in gncm_bind" Revert "usb: gadget: f_ncm: Fix atomic context locking issue" usb: typec: altmode/displayport: set displayport signaling rate in configure message usb: dwc3: pci: add support for the Intel Nova Lake -H usb/core/quirks: Add Huawei ME906S-device to wakeup quirk usb: gadget: uvc: fix interval_duration calculation xhci: Fix NULL pointer dereference when reading portli debugfs files usb: xhci: Prevent interrupt storm on host controller error (HCE) usb: xhci: Fix memory leak in xhci_disable_slot() usb: class: cdc-wdm: fix reordering issue in read code path usb: renesas_usbhs: fix use-after-free in ISR during device removal usb: cdc-acm: Restore CAP_BRK functionnality to CH343 ...

usb: core: new quirk to handle devices with zero configurations

2026-03-11T15:17:19+00:00

Some USB devices incorrectly report bNumConfigurations as 0 in their device descriptor, which causes the USB core to reject them during enumeration. logs: usb 1-2: device descriptor read/64, error -71 usb 1-2: no configurations usb 1-2: can't read configurations, error -22 However, these devices actually work correctly when treated as having a single configuration. Add a new quirk USB_QUIRK_FORCE_ONE_CONFIG to handle such devices. When this quirk is set, assume the device has 1 configuration instead of failing with -EINVAL. This quirk is applied to the device with VID:PID 5131:2007 which exhibits this behavior. Signed-off-by: Jie Deng Link: https://patch.msgid.link/20260227084931.1527461-1-dengjie03@kylinos.cn Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: add support for Sink Cap Extended msg response

2026-03-11T14:48:52+00:00

Add support for responding to Sink Cap Extended msg request. To achieve this, include parsing support for DT properties related to Sink Cap Extended. The request for Sink Cap Ext is a control message while the response is an extended message (chunked). As the Sink Caps Extended Data Block size (24 Byte) is less than MaxExtendedMsgChunkLen (26 Byte), a single chunk is sufficient to complete this AMS. Supporting sink cap extended messages while responding to a Get_Sink_Caps_Extended request when port is in Sink role is required in order to be compliant with at least USB PD Rev3.1 Ver1.8. Signed-off-by: Amit Sunil Dhamne Reviewed-by: Badhri Jagan Sridharan Reviewed-by: Heikki Krogerus Link: https://patch.msgid.link/20260223-skedb-v2-2-60675765bc7e@google.com Signed-off-by: Greg Kroah-Hartman

net: cdc-ncm: cleanup device descriptor

2026-03-11T13:59:48+00:00

Flags are boolean values, hence they should be typed as bool, not as u8. Signed-off-by: Oliver Neukum Link: https://patch.msgid.link/20260210122208.29244-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman