Linux kernel documentation tree maintained by Jonathan Corbet http://mirrors.hust.edu.cn/git/lwn.git/atom?h=docs-4.16-2 2018-01-29T19:30:16+00:00 2018-01-29T19:30:16+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-01-29T19:30:16+00:00 urn:sha1:8e3264710c1c5a3052618bb1b5ef11e13c67a932 Pull spi updates from Mark Brown: "Quite a quiet release for SPI, there are no changes at all to the core and not that many changes to drivers. Highlights of those driver changes include: - SH MSIOF support for GPIO chip selects contributed by Geert Uytterhoeven. - Full duplex support for a3700 contributed by Maxime Chevallier. - Support for DMA transfers on Atmel devices that require a bounce buffer contributed by Radu Pirea" * tag 'spi-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (31 commits) spi: dw: Remove unused members from struct chip_data spi: orion: Fix a resource leak if the optional "axi" clk is deferred spi: a3700: Remove endianness swapping for full-duplex transfers spi: a3700: Remove endianness swapping functions when accessing FIFOs spi: a3700: Add full-duplex support spi: a3700: Allow to enable or disable FIFO mode spi: a3700: Set frequency limits at startup spi: a3700: Clear DATA_OUT when performing a read spi: orion: Fix clock resource by adding an optional bus clock spi: s3c64xx: add SPDX identifier spi: imx: do not access registers while clocks disabled spi: atmel: Implements transfers with bounce buffer spi: sh-msiof: Fix timeout failures for TX-only DMA transfers spi: spi-fsl-dspi: account for const type of of_device_id.data spi: bcm53xx: simplify reading SPI data spi: sirf: account for const type of of_device_id.data spi: pxa2xx: Use gpiod_put() not gpiod_free() spi: pxa2xx: avoid redundant gpio_to_desc(desc_to_gpio()) round-trip spi: sh-msiof: Document hardware limitations related to chip selects spi: sh-msiof: Implement cs-gpios configuration ... 2018-01-12T15:41:15+00:00 Ladislav Michl ladis@linux-mips.org 2018-01-12T13:18:00+00:00 urn:sha1:2514830b8b8ca966fae35103070984c2e847b2b9 As OneNAND driver is now using devicetree gpmc-onenand and its platform data is unused and can be removed. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> 2018-01-08T15:38:06+00:00 Andi Shyti andi.shyti@samsung.com 2017-12-14T06:28:27+00:00 urn:sha1:78b5d705b51bc175fb67e4f5209f55e5ec581eec Replace the original license statement with the SPDX identifier. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Mark Brown <broonie@kernel.org> 2017-11-23T06:46:06+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-11-23T06:46:06+00:00 urn:sha1:14b661ebb6cfa386afa5a5247eb09e24d420af3a Pull MTD updates from Richard Weinberger: "General changes: - Unconfuse get_unmapped_area and point/unpoint driver methods - New partition parser: sharpslpart - Kill GENERIC_IO - Various fixes NAND changes: - Add a flag to mark NANDs that require 3 address cycles to encode a page address - Set a default ECC/free layout when NAND_ECC_NONE is requested - Fix a bug in panic_nand_write() - Another batch of cleanups for the denali driver - Fix PM support in the atmel driver - Remove support for platform data in the omap driver - Fix subpage write in the omap driver - Fix irq handling in the mtk driver - Change link order of mtk_ecc and mtk_nand drivers to speed up boot time - Change log level of ECC error messages in the mxc driver - Patch the pxa3xx driver to support Armada 8k platforms - Add BAM DMA support to the qcom driver - Convert gpio-nand to the GPIO desc API - Fix ECC handling in the mt29f driver SPI-NOR changes: - Introduce system power management support - New mechanism to select the proper .quad_enable() hook by JEDEC ID, when needed, instead of only by manufacturer ID - Add support to new memory parts from Gigadevice, Winbond, Macronix and Everspin - Maintainance for Cadence, Intel, Mediatek and STM32 drivers" * tag 'for-linus-20171120' of git://git.infradead.org/linux-mtd: (85 commits) mtd: Avoid probe failures when mtd->dbg.dfs_dir is invalid mtd: sharpslpart: Add sharpslpart partition parser mtd: Add sanity checks in mtd_write/read_oob() mtd: remove the get_unmapped_area method mtd: implement mtd_get_unmapped_area() using the point method mtd: chips/map_rom.c: implement point and unpoint methods mtd: chips/map_ram.c: implement point and unpoint methods mtd: mtdram: properly handle the phys argument in the point method mtd: mtdswap: fix spelling mistake: 'TRESHOLD' -> 'THRESHOLD' mtd: slram: use memremap() instead of ioremap() kconfig: kill off GENERIC_IO option mtd: Fix C++ comment in include/linux/mtd/mtd.h mtd: constify mtd_partition mtd: plat-ram: Replace manual resource management by devm mtd: nand: Fix writing mtdoops to nand flash. mtd: intel-spi: Add Intel Lewisburg PCH SPI super SKU PCI ID mtd: nand: mtk: fix infinite ECC decode IRQ issue mtd: spi-nor: Add support for mr25h128 mtd: nand: mtk: change the compile sequence of mtk_nand.o and mtk_ecc.o mtd: spi-nor: enable 4B opcodes for mx66l51235l ... 2017-11-17T00:05:01+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-11-17T00:05:01+00:00 urn:sha1:cf9b0772f2e410645fece13b749bd56505b998b8 Pull ARM SoC driver updates from Arnd Bergmann: "This branch contains platform-related driver updates for ARM and ARM64, these are the areas that bring the changes: New drivers: - driver support for Renesas R-Car V3M (R8A77970) - power management support for Amlogic GX - a new driver for the Tegra BPMP thermal sensor - a new bus driver for Technologic Systems NBUS Changes for subsystems that prefer to merge through arm-soc: - the usual updates for reset controller drivers from Philipp Zabel, with five added drivers for SoCs in the arc, meson, socfpa, uniphier and mediatek families - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla, Heiner Kallweit and Lorenzo Pieralisi Changes specific to some ARM-based SoC - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on ARM as well - several changes for power management on Broadcom SoCs - various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek - minor Cleanups for Samsung, TI OMAP SoCs" [ NOTE! This doesn't work without the previous ARM SoC device-tree pull, because the R8A77970 driver is missing a header file that came from that pull. The fact that this got merged afterwards only fixes it at this point, and bisection of that driver will fail if/when you walk into the history of that driver. - Linus ] * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits) soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader bus: add driver for the Technologic Systems NBUS memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg() soc: qcom: remove unused label soc: amlogic: gx pm domain: add PM and OF dependencies drivers/firmware: psci_checker: Add missing destroy_timer_on_stack() dt-bindings: power: add amlogic meson power domain bindings soc: amlogic: add Meson GX VPU Domains driver soc: qcom: Remote filesystem memory driver dt-binding: soc: qcom: Add binding for rmtfs memory of: reserved_mem: Accessor for acquiring reserved_mem of/platform: Generalize /reserved-memory handling soc: mediatek: pwrap: fix fatal compiler error soc: mediatek: pwrap: fix compiler errors arm64: mediatek: cleanup message for platform selection soc: Allow test-building of MediaTek drivers soc: mediatek: place Kconfig for all SoC drivers under menu soc: mediatek: pwrap: add support for MT7622 SoC soc: mediatek: pwrap: add common way for setup CS timing extenstion soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap .. 2017-11-16T04:30:12+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-11-16T04:30:12+00:00 urn:sha1:5d352e69c60e54b5f04d6e337a1d2bf0dbf3d94a Pull media updates from Mauro Carvalho Chehab: - Documentation for digital TV (both kAPI and uAPI) are now in sync with the implementation (except for legacy/deprecated ioctls). This is a major step, as there were always a gap there - New sensor driver: imx274 - New cec driver: cec-gpio - New platform driver for rockship rga and tegra CEC - New RC driver: tango-ir - Several cleanups at atomisp driver - Core improvements for RC, CEC, V4L2 async probing support and DVB - Lots of drivers cleanup, fixes and improvements. * tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits) dvb_frontend: don't use-after-free the frontend struct media: dib0700: fix invalid dvb_detach argument media: v4l2-ctrls: Don't validate BITMASK twice media: s5p-mfc: fix lockdep warning media: dvb-core: always call invoke_release() in fe_free() media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep media: au0828: make const array addr_list static media: cx88: make const arrays default_addr_list and pvr2000_addr_list static media: drxd: make const array fastIncrDecLUT static media: usb: fix spelling mistake: "synchronuously" -> "synchronously" media: ddbridge: fix build warnings media: av7110: avoid 2038 overflow in debug print media: Don't do DMA on stack for firmware upload in the AS102 driver media: v4l: async: fix unregister for implicitly registered sub-device notifiers media: v4l: async: fix return of unitialized variable ret media: imx274: fix missing return assignment from call to imx274_mode_regs media: camss-vfe: always initialize reg at vfe_set_xbar_cfg() media: atomisp: make function calls cleaner media: atomisp: get rid of storage_class.h media: atomisp: get rid of wrong stddef.h include ... 2017-11-15T02:07:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-11-15T02:07:18+00:00 urn:sha1:9f7a9b1191b0252184b1971c7248c304d4e38e5e Pull input updates from Dmitry Torokhov: - three new touchscreen drivers: EETI EXC3000, HiDeep, and Samsung S6SY761 - the timer API conversion (setup_timer() -> timer_setup()) - a few drivers swiytched to using managed API for creating custom device attributes - other assorted fixed and cleanups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits) Input: gamecon - mark expected switch fall-throughs Input: sidewinder - mark expected switch fall-throughs Input: spaceball - mark expected switch fall-throughs Input: uinput - unlock on allocation failure in ioctl Input: add support for the Samsung S6SY761 touchscreen Input: add support for HiDeep touchscreen Input: st1232 - remove obsolete platform device support Input: convert autorepeat timer to use timer_setup() media: ttpci: remove autorepeat handling and use timer_setup Input: cyttsp4 - avoid overflows when calculating memory sizes Input: mxs-lradc - remove redundant assignment to pointer input Input: add I2C attached EETI EXC3000 multi touch driver Input: goodix - support gt1151 touchpanel Input: ps2-gpio - actually abort probe when connected to sleeping GPIOs Input: hil_mlc - convert to using timer_setup() Input: hp_sdc - convert to using timer_setup() Input: touchsceen - convert timers to use timer_setup() Input: keyboard - convert timers to use timer_setup() Input: uinput - fold header into the driver proper Input: uinput - remove uinput_allocate_device() ... 2017-11-15T01:52:21+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-11-15T01:52:21+00:00 urn:sha1:4008e6a9bcee2f3b61bb11951de0fb0ed764cb91 Pull i2c updates from Wolfram Sang: "This contains two bigger than usual tree-wide changes this time. They all have proper acks, caused no merge conflicts in linux-next where they have been for a while. They are namely: - to-gpiod conversion of the i2c-gpio driver and its users (touching arch/* and drivers/mfd/*) - adding a sbs-manager based on I2C core updates to SMBus alerts (touching drivers/power/*) Other notable changes: - i2c_boardinfo can now carry a dev_name to be used when the device is created. This is because some devices in ACPI world need fixed names to find the regulators. - the designware driver got a long discussed overhaul of its PM handling. img-scb and davinci got PM support, too. - at24 driver has way better OF support. And it has a new maintainer. Thanks Bartosz for stepping up! The rest is regular driver updates and fixes" * 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits) ARM: sa1100: simpad: Correct I2C GPIO offsets i2c: aspeed: Deassert reset in probe eeprom: at24: Add OF device ID table MAINTAINERS: new maintainer for AT24 driver i2c: nuc900: remove platform_data, too i2c: thunderx: Remove duplicate NULL check i2c: taos-evm: Remove duplicate NULL check i2c: Make i2c_unregister_device() NULL-aware i2c: xgene-slimpro: Support v2 i2c: mpc: remove useless variable initialization i2c: omap: Trigger bus recovery in lockup case i2c: gpio: Add support for named gpios in DT dt-bindings: i2c: i2c-gpio: Add support for named gpios i2c: gpio: Local vars in probe i2c: gpio: Augment all boardfiles to use open drain i2c: gpio: Enforce open drain through gpiolib gpio: Make it possible for consumers to enforce open drain i2c: gpio: Convert to use descriptors power: supply: sbs-message: fix some code style issues power: supply: sbs-battery: remove unchecked return var ... 2017-11-13T16:55:46+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-11-13T16:55:46+00:00 urn:sha1:1e19bded7f5d5152b7f53ee7356241ecb18905b0 Pull hwmon updates from Guenter Roeck: - drivers for MAX31785 and MAX6621 - support for AMD family 17h (Ryzen, Threadripper) temperature sensors - various driver cleanups and minor improvements * tag 'hwmon-for-linus-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (30 commits) dt-bindings: pmbus: Add Maxim MAX31785 documentation pmbus: Add driver for Maxim MAX31785 Intelligent Fan Controller hwmon: (aspeed-pwm-tacho) Sort headers hwmon: (xgene) Minor clean up of ifdef and acpi_match_table reference hwmon: (max6621) Inverted if condition in max6621_read() hwmon: (asc7621) remove redundant assignment to newval hwmon: (xgene) Support hwmon v2 hwmon: (gpio-fan) Fix null pointer dereference at probe hwmon: (gpio-fan) Convert to use GPIO descriptors hwmon: (gpio-fan) Rename GPIO line state variables hwmon: (gpio-fan) Get rid of the gpio alarm struct hwmon: (gpio-fan) Get rid of platform data struct hwmon: (gpio-fan) Mandate OF_GPIO and cut pdata path hwmon: (gpio-fan) Send around device pointer hwmon: (gpio-fan) Localize platform data hwmon: (gpio-fan) Use local variable pointers hwmon: (gpio-fan) Move DT bindings to the right place Documentation: devicetree: add max6621 device hwmon: (max6621) Add support for Maxim MAX6621 temperature sensor hwmon: (w83793) make const array watchdog_minors static, reduces object code size ... 2017-11-08T02:13:42+00:00 Geert Uytterhoeven geert+renesas@glider.be 2017-10-31T16:47:28+00:00 urn:sha1:4a1a57df97636b9323c4221cc75a35694b6d34c7 Commit 1fa59bda21c7fa36 ("ARM: shmobile: Remove legacy board code for Armadillo-800 EVA"), removed the last user of st1232_pdata and the "st1232-ts" platform device. All remaining users use DT. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>