lwn.git/fs/ocfs2/stack_o2cb.c, branch docs-5.6

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 286

2019-06-05T15:36:37+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 97 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.025053186@linutronix.de Signed-off-by: Greg Kroah-Hartman

ocfs2: avoid a pointless delay in o2cb_cluster_check()

2015-04-14T23:48:57+00:00

Fix an off-by-one when attempting to avoid an msleep() on the final loop iteration. Signed-off-by: Daeseok Youn Cc: Mark Fasheh Cc: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ocfs2: pass ocfs2_cluster_connection to ocfs2_this_node

2014-01-22T00:19:41+00:00

This is done to differentiate between using and not using controld and use the connection information accordingly. We need to be backward compatible. So, we use a new enum ocfs2_connection_type to identify when controld is used and when it is not. Signed-off-by: Goldwyn Rodrigues Reviewed-by: Mark Fasheh Cc: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ocfs2: remove kfree() redundant null checks

2013-02-22T01:22:19+00:00

smatch analysis indicates a number of redundant NULL checks before calling kfree(), eg: fs/ocfs2/alloc.c:6138 ocfs2_begin_truncate_log_recovery() info: redundant null check on *tl_copy calling kfree() fs/ocfs2/alloc.c:6755 ocfs2_zero_range_for_truncate() info: redundant null check on pages calling kfree() etc.... [akpm@linux-foundation.org: revert dubious change in ocfs2_begin_truncate_log_recovery()] Signed-off-by: Tim Gardner Cc: Mark Fasheh Acked-by: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ocfs2/cluster: Cluster up now includes network connections too

2011-07-24T17:33:54+00:00

The cluster up check only checks to see if the node is heartbeating or not. If yes it continues assuming that the node is connected to all the nodes. But if that is not the case, the cluster join aborts with a stack of errors that are not easy to comprehend. This patch adds the network connect check upfront and prints the nodes that the node is not yet connected to, before aborting. Signed-off-by: Sunil Mushran

ocfs2: Clean up messages in stack_o2cb.c

2011-07-24T17:24:54+00:00

o2cb messages needed a facelift. Signed-off-by: Sunil Mushran

ocfs2: Print message if user mounts without starting global heartbeat

2010-10-07T00:55:29+00:00

In global heartbeat mode, the heartbeat is started by the user. This patch prints an error if the user attempts to mount a volume without starting the heartbeat. Signed-off-by: Sunil Mushran

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

ocfs2: Hang the locking proto on the cluster conn and use it in asts.

2010-02-26T23:41:16+00:00

With the ocfs2_cluster_connection hanging off of the ocfs2_dlm_lksb, we have access to it in the ast and bast wrapper functions. Attach the ocfs2_locking_protocol to the conn. Now, instead of refering to a static variable for ast/bast pointers, the wrappers can look at the connection. This means different connections can have different ast/bast pointers, and it reduces the need for the static pointer. Signed-off-by: Joel Becker

ocfs2: Attach the connection to the lksb

2010-02-26T23:41:14+00:00

We're going to want it in the ast functions, so we convert union ocfs2_dlm_lksb to struct ocfs2_dlm_lksb and let it carry the connection. Signed-off-by: Joel Becker