lwn.git/drivers/scsi/esp_scsi.c, branch docs-5.2a-merge

treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively

2019-04-09T12:19:06+00:00

%pF and %pf are functionally equivalent to %pS and %ps conversion specifiers. The former are deprecated, therefore switch the current users to use the preferred variant. The changes have been produced by the following command: git grep -l '%p[fF]' | grep -v '^$tools\|Documentation$/' | \ while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done And verifying the result. Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com Cc: Andy Shevchenko Cc: linux-arm-kernel@lists.infradead.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: xen-devel@lists.xenproject.org Cc: linux-acpi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvdimm@lists.01.org Cc: linux-pci@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-btrfs@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: linux-mm@kvack.org Cc: ceph-devel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Sakari Ailus Acked-by: David Sterba (for btrfs) Acked-by: Mike Rapoport (for mm/memblock.c) Acked-by: Bjorn Helgaas (for drivers/pci) Acked-by: Rafael J. Wysocki Signed-off-by: Petr Mladek

scsi: flip the default on use_clustering

2018-12-19T04:13:12+00:00

Most SCSI drivers want to enable "clustering", that is merging of segments so that they might span more than a single page. Remove the ENABLE_CLUSTERING define, and require drivers to explicitly set DISABLE_CLUSTERING to disable this feature. Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

scsi: esp_scsi: Optimize PIO loops

2018-10-18T01:38:29+00:00

Avoid function calls in the inner PIO loops. On a Centris 660av this improves throughput for sequential read transfers by about 40% and sequential write by about 10%. Unfortunately it is not possible to have methods like .esp_write8 placed inline so this is always going to be slow, even with LTO. Tested-by: Stan Johnson Signed-off-by: Finn Thain Tested-by: Michael Schmitz Signed-off-by: Martin K. Petersen

scsi: esp_scsi: De-duplicate PIO routines

2018-10-18T01:38:20+00:00

As a temporary measure, the code to implement PIO transfers was duplicated in zorro_esp and mac_esp. Now that it has stabilized move the common code into the core driver but don't build it unless needed. This replaces the inline assembler with more portable writesb() calls. Optimizing the m68k writesb() implementation is a separate patch. [mkp: applied by hand] Signed-off-by: Finn Thain Tested-by: Stan Johnson Tested-by: Michael Schmitz Signed-off-by: Martin K. Petersen

scsi: esp_scsi: Eliminate ESP_FLAG_DOING_SLOWCMD

2018-10-18T01:37:31+00:00

The concept of a 'slow command' as it appears in esp_scsi is confusing because it could refer to an ESP command or a SCSI command. It turns out that it refers to a particular ESP select command which the driver also tracks as 'ESP_SELECT_MSGOUT'. For readability, it is better to use the terminology from the datasheets. The global ESP_FLAG_DOING_SLOWCMD flag is redundant anyway, as it can be inferred from esp->select_state. Remove the ESP_FLAG_DOING_SLOWCMD cruft and just use a boolean local variable. Tested-by: Stan Johnson Signed-off-by: Finn Thain Tested-by: Michael Schmitz Signed-off-by: Martin K. Petersen

scsi: esp_scsi: Grant disconnect privilege for untagged commands

2018-10-18T01:37:26+00:00

A SCSI device is not granted disconnect privilege by an esp_scsi host unless that device has its simple_tags flag set. However, a device may support disconnect/reselect and not support command queueing. Allow such devices to disconnect and thereby improve bus utilization. Drop the redundant 'lp' check. The mid-layer invokes .slave_alloc and .slave_destroy in such a way that we may rely on scmd->device->hostdata for as long as scmd belongs to the low-level driver. Tested-by: Stan Johnson Signed-off-by: Finn Thain Tested-by: Michael Schmitz Signed-off-by: Martin K. Petersen

scsi: esp_scsi: Track residual for PIO transfers

2018-10-18T01:34:20+00:00

If a target disconnects during a PIO data transfer the command may fail when the target reconnects: scsi host1: DMA length is zero! scsi host1: cur adr[04380000] len[00000000] The scsi bus is then reset. This happens because the residual reached zero before the transfer was completed. The usual residual calculation relies on the Transfer Count registers. That works for DMA transfers but not for PIO transfers. Fix the problem by storing the PIO transfer residual and using that to correctly calculate bytes_sent. Fixes: 6fe07aaffbf0 ("[SCSI] m68k: new mac_esp scsi driver") Tested-by: Stan Johnson Signed-off-by: Finn Thain Tested-by: Michael Schmitz Signed-off-by: Martin K. Petersen

scsi: esp_scsi: remove union in esp_cmd_priv

2018-10-16T03:00:39+00:00

The dma_addr_t member is unused ever since we switched the SCSI layer to send down single-segement command using a scatterlist as well many years ago. Signed-off-by: Christoph Hellwig Tested-by: Finn Thain Signed-off-by: Martin K. Petersen

scsi: esp_scsi: move dma mapping into the core code

2018-10-16T03:00:38+00:00

Except for the mac_esp driver, which uses PIO or pseudo DMA, all drivers share the same dma mapping calls. Move the dma mapping into the core code using the scsi_dma_map / scsi_dma_unmap helpers, with a special identify mapping variant triggered off a new ESP_FLAG_NO_DMA_MAP flag for mac_esp. Signed-off-by: Christoph Hellwig Tested-by: Finn Thain Signed-off-by: Martin K. Petersen

scsi: esp_scsi: remove the dev argument to scsi_esp_register

2018-10-16T03:00:38+00:00

We can simplify use esp->dev now. Signed-off-by: Christoph Hellwig Tested-by: Finn Thain Signed-off-by: Martin K. Petersen