lwn.git/drivers/scsi/aacraid/src.c, branch standardize-docs

scsi: aacraid: Add reset debugging statements

2017-06-13T00:48:00+00:00

Added info and error messages in controller reset function to log information about the status of the IOP/SOFT reset. Signed-off-by: Raghava Aditya Renukunta Reviewed-by: David Carroll Signed-off-by: Martin K. Petersen

scsi: aacraid: Rework aac_src_restart

2017-06-13T00:48:00+00:00

Removed switch case and replaced with if mask checks. Moved KERNEL_PANIC check to when bled is less than 0. Signed-off-by: Raghava Aditya Renukunta Reviewed-by: David Carroll Signed-off-by: Martin K. Petersen

scsi: aacraid: Rework SOFT reset code

2017-06-13T00:48:00+00:00

Now the driver issues a soft reset and waits for the controller to be up and running by periodically checking on the status of the controller health registers. Also prevents ARC adapters from issuing soft reset if IOP resets failed. Signed-off-by: Raghava Aditya Renukunta Reviewed-by: David Carroll Signed-off-by: Martin K. Petersen

scsi: aacraid: Add periodic checks to see IOP reset status

2017-06-13T00:47:59+00:00

Added function that waits with a timeout for the ctrl to be up and running after triggering an IOP reset. Also removed 30 sec sleep as it is not needed. Signed-off-by: Raghava Aditya Renukunta Reviewed-by: David Carroll Signed-off-by: Martin K. Petersen

scsi: aacraid: Rework IOP reset

2017-06-13T00:47:59+00:00

Reworked IOP reset to remove unneeded variable and created a helper function to notify fw of an imminent IOP reset. Signed-off-by: Raghava Aditya Renukunta Reviewed-by: David Carroll Signed-off-by: Martin K. Petersen

scsi: aacraid: Using single reset mask for IOP reset

2017-06-13T00:47:59+00:00

The driver can now trigger IOP reset with a single reset mask. Removed code that retrieves a reset_mask from the firmware. Signed-off-by: Raghava Aditya Renukunta Reviewed-by: David Carroll Signed-off-by: Martin K. Petersen

scsi: aacraid: Fix typo in blink status

2017-03-07T03:23:27+00:00

The return status of the adapter check on KERNEL_PANIC is supposed to be the upper 16 bits of the OMR status register. Fixes: c421530bf848604e (scsi: aacraid: Reorder Adpater status check) Reported-by: Dan Carpenter Signed-off-by: Raghava Aditya Renukunta Reviewed-by: Dave Carroll Signed-off-by: Martin K. Petersen

scsi: aacraid: Save adapter fib log before an IOP reset

2017-02-22T23:41:42+00:00

Currently the adapter firmware does not save outstanding I/O's log information when an IOP reset is triggered. This is problematic when trying to root cause and debug issues. Fixed by adding sync command to trigger I/O log file save in the adapter firmware before issuing an IOP reset. Signed-off-by: Raghava Aditya Renukunta Reviewed-by: David Carroll Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen

scsi: aacraid: Reorder Adapter status check

2017-02-22T23:41:42+00:00

The driver currently checks the SELF_TEST_FAILED first and then KERNEL_PANIC next. Under error conditions(boot code failure) both SELF_TEST_FAILED and KERNEL_PANIC can be set at the same time. The driver has the capability to reset the controller on an KERNEL_PANIC, but not on SELF_TEST_FAILED. Fixed by first checking KERNEL_PANIC and then the others. Cc: stable@vger.kernel.org Fixes: e8b12f0fb835223752 ([SCSI] aacraid: Add new code for PMC-Sierra's SRC base controller family) Signed-off-by: Raghava Aditya Renukunta Reviewed-by: David Carroll Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen

scsi: aacraid: Skip IOP reset on controller panic(SMART Family)

2017-02-22T23:41:42+00:00

When the SMART family of controller panic (KERNEL_PANIC) , they do not honor IOP resets. So better to skip it and directly perform a IWBR reset. Signed-off-by: Raghava Aditya Renukunta Reviewed-by: David Carroll Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen