lwn.git/drivers/scsi/aacraid/linit.c, branch v5.3-rc1

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18

2019-05-21T09:28:46+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program see the file copying if not write to the free software foundation 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 52 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Jilayne Lovejoy Reviewed-by: Steve Winslow Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154042.342335923@linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2019-03-16T19:51:50+00:00

Pull more SCSI updates from James Bottomley: "This is the final round of mostly small fixes and performance improvements to our initial submit. The main regression fix is the ia64 simscsi build failure which was missed in the serial number elimination conversion" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: ia64: simscsi: use request tag instead of serial_number scsi: aacraid: Fix performance issue on logical drives scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup() scsi: libiscsi: Hold back_lock when calling iscsi_complete_task scsi: hisi_sas: Change SERDES_CFG init value to increase reliability of HiLink scsi: hisi_sas: Send HARD RESET to clear the previous affiliation of STP target port scsi: hisi_sas: Set PHY linkrate when disconnected scsi: hisi_sas: print PHY RX errors count for later revision of v3 hw scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO scsi: hisi_sas: Change return variable type in phy_up_v3_hw() scsi: qla2xxx: check for kstrtol() failure scsi: lpfc: fix 32-bit format string warning scsi: lpfc: fix unused variable warning scsi: target: tcmu: Switch to bitmap_zalloc() scsi: libiscsi: fall back to sendmsg for slab pages scsi: qla2xxx: avoid printf format warning scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset scsi: lpfc: Correct __lpfc_sli_issue_iocb_s4 lockdep check scsi: ufs: hisi: fix ufs_hba_variant_ops passing scsi: qla2xxx: Fix panic in qla_dfs_tgt_counters_show ...

scsi: aacraid: Fix performance issue on logical drives

2019-03-14T11:16:36+00:00

Fix performance issue where the queue depth for SmartIOC logical volumes is set to 1, and allow the usual logical volume code to be executed Fixes: a052865fe287 (aacraid: Set correct Queue Depth for HBA1000 RAW disks) Cc: stable@vger.kernel.org Signed-off-by: Sagar Biradar Reviewed-by: Dave Carroll Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2019-03-10T00:53:47+00:00

Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...

scsi: ata: Use unsigned int for cmd's type in ioctls in scsi_host_template

2019-02-08T22:33:00+00:00

Clang warns several times in the scsi subsystem (trimmed for brevity): drivers/scsi/hpsa.c:6209:7: warning: overflow converting case value to switch condition type (2147762695 to 18446744071562347015) [-Wswitch] case CCISS_GETBUSTYPES: ^ drivers/scsi/hpsa.c:6208:7: warning: overflow converting case value to switch condition type (2147762694 to 18446744071562347014) [-Wswitch] case CCISS_GETHEARTBEAT: ^ The root cause is that the _IOC macro can generate really large numbers, which don't fit into type 'int', which is used for the cmd parameter in the ioctls in scsi_host_template. My research into how GCC and Clang are handling this at a low level didn't prove fruitful. However, looking at the rest of the kernel tree, all ioctls use an 'unsigned int' for the cmd parameter, which will fit all of the _IOC values in the scsi/ata subsystems. Make that change because none of the ioctls expect a negative value for any command, it brings the ioctls inline with the reset of the kernel, and it removes ambiguity, which is never good when dealing with compilers. Link: https://github.com/ClangBuiltLinux/linux/issues/85 Link: https://github.com/ClangBuiltLinux/linux/issues/154 Link: https://github.com/ClangBuiltLinux/linux/issues/157 Signed-off-by: Nathan Chancellor Acked-by: Bradley Grove Acked-by: Don Brace Reviewed-by: Bart Van Assche Tested-by: Nick Desaulniers Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

scsi: aacraid: clean up some indentation and formatting issues

2019-02-05T03:18:41+00:00

There are several issues with badly indented statements. Fix these and clean up the formatting. Signed-off-by: Colin Ian King Acked-by: Mahesh Rajashekhara Signed-off-by: Martin K. Petersen

scsi: communicate max segment size to the DMA mapping code

2019-01-23T01:40:59+00:00

When a host driver sets a maximum segment size we should not only propagate that setting to the block layer, which can merge segments, but also to the DMA mapping layer which can merge segments as well. Fixes: 50c2e9107f ("scsi: introduce a max_segment_size host_template parameters") Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

scsi: flip the default on use_clustering

2018-12-19T04:13:12+00:00

Most SCSI drivers want to enable "clustering", that is merging of segments so that they might span more than a single page. Remove the ENABLE_CLUSTERING define, and require drivers to explicitly set DISABLE_CLUSTERING to disable this feature. Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

scsi: aacraid: change event_wait to a completion

2018-12-13T01:35:33+00:00

The event_wait semaphore has completion semantics, so we can change it over to the completion interface for clarity without changing the behavior. Signed-off-by: Arnd Bergmann Reviewed-by: Johannes Thumshirn Reviewed-by: Dave Carroll Signed-off-by: Martin K. Petersen

scsi: aacraid: Mark expected switch fall-through

2018-11-29T02:47:30+00:00

In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva Reviewed-by: Dave Carroll Signed-off-by: Martin K. Petersen