lwn.git/drivers/net/mlx4/fw.h, branch docs-next

mlx4: Move the Mellanox driver

2011-08-11T09:41:35+00:00

Moves the Mellanox driver into drivers/net/ethernet/mellanox/ and make the necessary Kconfig and Makefile changes. CC: Roland Dreier Signed-off-by: Jeff Kirsher

mlx4_core: Add network flow counters

2011-07-19T04:04:34+00:00

ConnectX devices support a set of flow counters that can be attached to a set containing one or more QPs. Each such counter tracks receive and transmit packets and bytes of these QPs. This patch queries the device to check support for counters, handles initialization of the HCA to enable counters, and initializes a bitmap allocator to control counter allocations. Derived from patch by Eli Cohen . Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

mlx4_core: Read extended capabilities into the flags field

2011-07-19T04:04:32+00:00

Query another dword containing up to 32 extended device capabilities and merge it into struct mlx4_caps.flags. Update the code that handles the current extended device capabilities (e.g UDP RSS, WoL, vep steering, etc) to use the extended device cap flags field instead of a field per extended capability. Initial patch done by Eli Cohen . Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

mlx4_core: Extend capability flags to 64 bits

2011-07-19T04:04:32+00:00

The latest firmware adds a second dword containing more device flags, so extend the device capabilities flags field from 32 to 64 bits. Derived from patch by Eli Cohen Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

mlx4: generalization of multicast steering.

2011-03-23T19:24:21+00:00

The same packet steering mechanism would be used both for IB and Ethernet, Both multicasts and unicasts. This commit prepares the general infrastructure for this. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller

mlx4: Wake on LAN support

2011-03-23T19:24:19+00:00

The driver queries the FW for WOL support. Ethtool get/set_wol is implemented accordingly. Only magic packets are supported at the time. Signed-off-by: Igor Yarovinsky Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller

mlx4_en: UDP RSS support

2010-08-24T21:57:09+00:00

Adding capability for RSS for UDP traffic, hashing is done based on IP addresses and UDP port number. The support depends on HW/FW capabilities. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller

mlx4_en: Fixing report in Ethtool get_settings

2010-08-24T21:54:51+00:00

The report now based on query from FW, giving the correct tranciever type and link speed. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller

mlx4_en: Added self diagnostics test implementation

2010-08-24T21:54:51+00:00

The selftest includes 5 features: 1. Interrupt test: Executing commands and receiving command completion on all our interrupt vectors. 2. Link test: Verifying we are connected to valid link partner. 3. Speed test: Check that we negotiated link speed correctly. 4. Registers test: Activate HW health check command. 5. Loopback test: Send a packet on loopback interface and catch it on RX side. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller

mlx4_core: Multiple port type support

2008-10-22T22:38:42+00:00

Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin Signed-off-by: Roland Dreier