lwn.git/drivers/mtd/chips/jedec_probe.c, branch docs-5.3

Merge tag 'mtd/for-4.17' of git://git.infradead.org/linux-mtd

2018-04-06T19:15:41+00:00

Pull MTD updates from Boris Brezillon: "MTD Core: - Remove support for asynchronous erase (not implemented by any of the existing drivers anyway) - Remove Cyrille from the list of SPI NOR and MTD maintainers - Fix kernel doc headers - Allow users to define the partitions parsers they want to test through a DT property (compatible of the partitions subnode) - Remove the bfin-async-flash driver (the only architecture using it has been removed) - Fix pagetest test - Add extra checks in mtd_erase() - Simplify the MTD partition creation logic and get rid of mtd_add_device_partitions() MTD Drivers: - Add endianness information to the physmap DT binding - Add Eon EN29LV400A IDs to JEDEC probe logic - Use %*ph where appropriate SPI NOR Drivers: - Make fsl-quaspi assign different names to MTD devices connected to the same QSPI controller - Remove an unneeded driver.bus assigned in the fsl-qspi driver NAND Core: - Prepare arrival of the SPI NAND subsystem by implementing a generic (interface-agnostic) layer to ease manipulation of NAND devices - Move onenand code base to the drivers/mtd/nand/ dir - Rework timing mode selection - Provide a generic way for NAND chip drivers to flag a specific GET/SET FEATURE operation as supported/unsupported - Stop embedding ONFI/JEDEC param page in nand_chip NAND Drivers: - Rework/cleanup of the mxc driver - Various cleanups in the vf610 driver - Migrate the fsmc and vf610 to ->exec_op() - Get rid of the pxa driver (replaced by marvell_nand) - Support ->setup_data_interface() in the GPMI driver - Fix probe error path in several drivers - Remove support for unused hw_syndrome mode in sunxi_nand - Various minor improvements" * tag 'mtd/for-4.17' of git://git.infradead.org/linux-mtd: (89 commits) dt-bindings: fsl-quadspi: Add the example of two SPI NOR mtd: fsl-quadspi: Distinguish the mtd device names mtd: nand: Fix some function description mismatches in core.c mtd: fsl-quadspi: Remove unneeded driver.bus assignment mtd: rawnand: marvell: Rename ->ecc_clk into ->core_clk mtd: rawnand: s3c2410: enhance the probe function error path mtd: rawnand: tango: fix probe function error path mtd: rawnand: sh_flctl: fix the probe function error path mtd: rawnand: omap2: fix the probe function error path mtd: rawnand: mxc: fix probe function error path mtd: rawnand: denali: fix probe function error path mtd: rawnand: davinci: fix probe function error path mtd: rawnand: cafe: fix probe function error path mtd: rawnand: brcmnand: fix probe function error path mtd: rawnand: sunxi: Stop supporting ECC_HW_SYNDROME mode mtd: rawnand: marvell: Fix clock resource by adding a register clock mtd: ftl: Use DIV_ROUND_UP() mtd: Fix some function description mismatches in mtdcore.c mtd: physmap_of: update struct map_info's swap as per map requirement dt-bindings: mtd-physmap: Add endianness supports ...

mtd: jedec_probe: Fix crash in jedec_read_mfr()

2018-03-29T17:29:06+00:00

It turns out that the loop where we read manufacturer jedec_read_mfd() can under some circumstances get a CFI_MFR_CONTINUATION repeatedly, making the loop go over all banks and eventually hit the end of the map and crash because of an access violation: Unable to handle kernel paging request at virtual address c4980000 pgd = (ptrval) [c4980000] *pgd=03808811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] PREEMPT ARM CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc1+ #150 Hardware name: Gemini (Device Tree) PC is at jedec_probe_chip+0x6ec/0xcd0 LR is at 0x4 pc : [] lr : [<00000004>] psr: 60000013 sp : c382dd18 ip : 0000ffff fp : 00000000 r10: c0626388 r9 : 00020000 r8 : c0626340 r7 : 00000000 r6 : 00000001 r5 : c3a71afc r4 : c382dd70 r3 : 00000001 r2 : c4900000 r1 : 00000002 r0 : 00080000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 0000397f Table: 00004000 DAC: 00000053 Process swapper (pid: 1, stack limit = 0x(ptrval)) Fix this by breaking the loop with a return 0 if the offset exceeds the map size. Fixes: 5c9c11e1c47c ("[MTD] [NOR] Add support for flash chips with ID in bank other than 0") Cc: Signed-off-by: Linus Walleij Signed-off-by: Boris Brezillon

mtd: jedec_probe: add Eon EN29LV400A IDs

2018-03-29T07:29:31+00:00

This adds the JEDEC IDs for Eon EN29LV400A variants EN29LV400AB and EN29LV400AT. This chip is found in the D-Link DNS-313. Signed-off-by: Linus Walleij Signed-off-by: Boris Brezillon

mtd: jedec_probe: fix LH28F640BF definition

2013-08-05T20:04:17+00:00

Zaurus 5500 contains 2 LH28F640BFHE-PTTL90 (64M 4Mx16) and the LH28F640BFHE-PTTL90.pdf datasheet available on the net shows the exact erasesize and the OTP support. At the moment only jedec_probe can discover the chip and the NOR is mounted read only probably because of wrong vpp. Signed-off-by: Andrea Adami Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse

mtd: replace DEBUG() with pr_debug()

2011-09-11T12:02:16+00:00

Start moving away from the MTD_DEBUG_LEVEL messages. The dynamic debugging feature is a generic kernel feature that provides more flexibility. (See Documentation/dynamic-debug-howto.txt) Also fix some punctuation, indentation, and capitalization that went along with the affected lines. Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy

mtd: spelling, capitalization, uniformity

2011-09-11T12:02:13+00:00

Therefor -> Therefore [Intern], [Internal] -> [INTERN] [REPLACABLE] -> [REPLACEABLE] syndrom, syndom -> syndrome ecc -> ECC buswith -> buswidth endianess -> endianness dont -> don't occures -> occurs independend -> independent wihin -> within erease -> erase blockes -> blocks ... Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy

Fix common misspellings

2011-03-31T14:26:23+00:00

Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi

mtd: jedec_probe: initialise make sector erase command variable

2011-03-11T12:05:54+00:00

In the commit 08968041bef437ec363623cd3218c2b083537ada (mtd: cfi_cmdset_0002: make sector erase command variable) introdused a field sector_erase_cmd. In the same commit initialisation of cfi->sector_erase_cmd made in cfi_chip_setup() (file drivers/mtd/chips/cfi_probe.c), so the CFI chip has no problem: ... cfi->cfi_mode = CFI_MODE_CFI; cfi->sector_erase_cmd = CMD(0x30); ... But for the JEDEC chips this initialisation is not carried out, so the JEDEC chips have sector_erase_cmd == 0. This patch adds the missing initialisation. Signed-off-by: Antony Pavlov Acked-by: Guillaume LECERF Signed-off-by: David Woodhouse CC: stable@kernel.org

mtd: jedec_probe: Change variable name from cfi_p to cfi

2011-03-11T12:05:24+00:00

In the following commit, we'll need to use the CMD() macro in order to fix the initialisation of the sector_erase_cmd field. That requires the local variable to be called 'cfi', so change it first in a simple patch. Signed-off-by: Antony Pavlov Acked-by: Guillaume LECERF Signed-off-by: David Woodhouse CC: stable@kernel.org

mtd: chips: add SST39WF160x NOR-flashes

2010-05-14T01:27:46+00:00

Due to a broken CFI, they have to be added to jedec_probe. Signed-off-by: Wolfram Sang Signed-off-by: David Woodhouse