lwn.git/drivers/mfd/sec-irq.c, branch docs-5.3

mfd: sec: Add support for the RTC on S2MPA01

2019-05-14T07:13:25+00:00

The RTC portion of the S2MPA01 appears to have the same register layout as the S2MPS14. Signed-off-by: Stuart Menefy Reviewed-by: Krzysztof Kozlowski Signed-off-by: Lee Jones

mfd: sec-core: Allow building as module

2018-10-23T07:58:34+00:00

The main MFD driver for Samsung PMICs (S2MPSXX, S5M876X) used with Exynos SoCs can be compiled and used as a module. The dependent clock, regulator and RTC drivers already can be built as a module. Building entire set of drivers as modules might require using initial ramdisk and can make booting process longer (due to probe deferrals). However adding such option is useful for testing and for multi-platform configurations. This also add required module authors to sec-irq.c file based on recent main contributors. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones

mfd: sec-core: Add SPDX license identifiers

2018-10-23T07:58:34+00:00

Replace GPL v2.0+ license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones

mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chip

2016-05-09T12:27:38+00:00

Use devm_mfd_add_devices() for adding MFD child devices and devm_regmap_add_irq_chip() for IRQ chip registration. This reduces the error code path and .remove callback for removing MFD child devices and deleting IRQ chip data. Signed-off-by: Laxman Dewangan Tested-by: Krzysztof Kozlowski Reviewed-by: Krzysztof Kozlowski Signed-off-by: Lee Jones

mfd: sec: Add support for S2MPS15 PMIC

2015-11-23T10:33:16+00:00

Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15 PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz clock outputs and battery charger. This patch adds initial support for LDO and buck regulators of S2MPS15 device. Signed-off-by: Thomas Abraham Signed-off-by: Alim Akhtar Reviewed-by: Krzysztof Kozlowski [Alim: Added s2mps15_devs like rtc and clk and related changes] Signed-off-by: Lee Jones

mfd: sec: Fix RTC alarm interrupt number on S2MPS11

2015-04-09T09:26:54+00:00

The RTC on S2MPS11 is the same as S2MPS14. However interrupt numbers of RTC alarms 0 and 1 were inversed between these two devices. So when rtc-s5m driver requested S2MPS14_IRQ_RTCA0 interrupt, it matched to S2MPS11_IRQ_RTCA1, not RTCA0. Fix this by using consistent RTC alarm interrupt numbers and adding a BUILD_BUG_ON for future generations. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones

mfd: sec-core: Add support for S2MPS13 device

2014-11-25T15:55:01+00:00

This patch adds the support for Samsung S2MPS13 PMIC device to the sec-core MFD driver. The S2MPS13 is very similar with existing S2MPS14 and includes PMIC/ RTC/CLOCK devices. Signed-off-by: Chanwoo Choi Acked-by: Sangbeom Kim Signed-off-by: Lee Jones

mfd: sec-core: Add support for S2MPU02 device

2014-07-09T13:58:11+00:00

Add support for Samsung S2MPU02 PMIC device to the MFD sec-core driver. The S2MPU02 device includes PMIC/RTC/Clock devices. Signed-off-by: Chanwoo Choi Reviewed-by: Krzysztof Kozlowski Signed-off-by: Lee Jones

mfd: sec-core: Remove duplicated device type from sec_pmic_dev

2014-06-03T07:11:21+00:00

The device type was stored in sec_pmic_dev state container twice: - unsigned long type (initialized from of_device_id or i2c_device_id) - int device_type (initialized as above or from board files when there is no DTS) The 'type' field was never used outside of probe so it can be safely removed. Change also the device_type in sec_pmic_dev and sec_platform_data to unsigned long to avoid any casts. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones

mfd: sec: Add support for S2MPS14

2014-03-18T10:50:09+00:00

Add support for S2MPS14 PMIC device to the MFD sec-core driver. The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two clocks instead of three and a little different registers layout. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones