lwn.git/drivers/media/video/cx88/cx88-i2c.c, branch v3.4.74

[media] video: Drop undue references to i2c-algo-bit

2011-11-24T17:11:17+00:00

There's one comment that has been copied from bttv to many other media/video drivers: /* init + register i2c algo-bit adapter */ Meanwhile, many drivers use hardware I2C implementations instead of relying on i2c-algo-bit, so this comment is misleading. Remove the reference to "algo-bit" from all drivers, to avoid any confusion. This is the best way to ensure that the comments won't go out of sync again. Anyone interested in the implementation details would rather look at the code itself. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab

[media] cx88: Remove the obsolete i2c_adapter.id field

2010-12-30T14:17:19+00:00

Signed-off-by: Mauro Carvalho Chehab

V4L/DVB: Remove the usage of I2C_HW_B_CX2388x on ir-kbd-i2c.c

2010-10-21T03:06:07+00:00

Move the cx88 specific initialization for Hauppauge XVR remotes into cx88-input, removing the need for test it inside ir-kbd-i2c. The reference at cx88 for this symbol, at: drivers/media/video/cx88/cx88-i2c.c: core->i2c_adap.id = I2C_HW_B_CX2388x; drivers/media/video/cx88/cx88-vp3054-i2c.c: vp3054_i2c->adap.id = I2C_HW_B_CX2388x; Can't be removed yet, since lirc-i2c still uses it. Signed-off-by: Mauro Carvalho Chehab

V4L/DVB: drivers/media: Make static data tables and strings const

2010-10-21T03:04:52+00:00

Making static data const avoids allocation of additional r/w memory and reduces initialisation time. It also provides some additional opportunities for compiler optimisations. Signed-off-by: Lawrence Rust Signed-off-by: Mauro Carvalho Chehab

V4L/DVB: Use custom I2C probing function mechanism

2010-08-11T16:20:57+00:00

Now that i2c-core offers the possibility to provide custom probing function for I2C devices, let's make use of it. Signed-off-by: Jean Delvare Acked-by: Mauro Carvalho Chehab

V4L/DVB: cx88: Move I2C IR initialization

2010-08-02T18:32:25+00:00

Move I2C IR initialization from just after I2C bus setup to right before non-I2C IR initialization. This is the same as was done for the bttv driver several months ago. Might solve bugs which have not yet been reported for some cards. It makes both drivers consistent, and makes it easier to disable IR support (coming soon.) Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab

V4L/DVB: FusionHDTV: Use quick reads for I2C IR device probing

2010-06-01T04:23:19+00:00

IR support on FusionHDTV cards is broken since kernel 2.6.31. One side effect of the switch to the standard binding model for IR I2C devices was to let i2c-core do the probing instead of the ir-kbd-i2c driver. There is a slight difference between the two probe methods: i2c-core uses 0-byte writes, while the ir-kbd-i2c was using 0-byte reads. As some IR I2C devices only support reads, the new probe method fails to detect them. For now, revert to letting the driver do the probe, using 0-byte reads. In the future, i2c-core will be extended to let callers of i2c_new_probed_device() provide a custom probing function. Signed-off-by: Jean Delvare Tested-by: "Timothy D. Lenz" Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11844): ir-kbd-i2c: Switch to the new-style device binding model

2009-06-16T21:21:11+00:00

Let card drivers probe for IR receiver devices and instantiate them if found. Ultimately it would be better if we could stop probing completely, but I suspect this won't be possible for all card types. There's certainly room for cleanups. For example, some drivers are sharing I2C adapter IDs, so they also had to share the list of I2C addresses being probed for an IR receiver. Now that each driver explicitly says which addresses should be probed, maybe some addresses can be dropped from some drivers. Also, the special cases in saa7134-i2c should probably be handled on a per-board basis. This would be more efficient and less risky than always probing extra addresses on all boards. I'll give it a try later. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11300): cx88: convert to v4l2_subdev.

2009-03-30T15:43:48+00:00

Convert cx88 to use v4l2_subdev since the old i2c autoprobing mechanism will be removed. Added code to explicitly load tvaudio where needed. Also fix the rtc-isl1208 support: since that driver no longer supports autoprobing it has to be loaded using the new i2c API. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11047): cx88: convert to v4l2_device.

2009-03-30T15:43:23+00:00

Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab