lwn.git/drivers/media/dvb/ttpci/budget-ci.c, branch v4.0.6

[media] Rename media/dvb as media/pci

2012-08-14T02:30:06+00:00

The remaining dvb drivers are pci, so rename them to match the bus. Signed-off-by: Mauro Carvalho Chehab

[media] tuners: remove dvb_frontend_parameters from set_params()

2011-12-31T10:57:29+00:00

This is a big patch, yet trivial: now that all tuners use the DVBv5 way to pass parameters (e. g. via fe->dtv_property_cache), the extra parameter can be removed from set_params() call. After this change, very few DVBv3 specific stuff are left at the tuners. Signed-off-by: Mauro Carvalho Chehab

[media] budget-ci: use DVBv5 parameters on set_params()

2011-12-31T10:31:55+00:00

Instead of using DVBv3 parameters, rely on DVBv5 parameters to set the tuner Signed-off-by: Mauro Carvalho Chehab

[media] budget-ci: Fix Hauppauge RC-5 IR support

2011-12-18T00:15:02+00:00

Hauppauge RC-5 tables require the full scancodes. The code at budget-ci handles it right, however, it request the rc-code to mask them with 0xff, breaking support for some remote controllers. Fix it by not selecting a scancode mask when the driver is on full_rc5 mode. Reported-by: Brian May Tested-by: Brian May Signed-off-by: Mauro Carvalho Chehab

[media] stb0899: Removed an extra byte sent at init on DiSEqC bus

2011-09-25T11:41:23+00:00

I noticed a stray 0x00 at init on DiSEqC bus (KNC1 DVB-S2) with a DiSEqC tool analyzer. I removed the register from initialization table and all seem to go well (at least for my KNC board). Signed-off-by: Florent Audebert Acked-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab

[media] budget-ci: Add support for TT S-1500 with BSBE1-D01A tuner

2011-05-20T12:28:30+00:00

Add support for TT S-1500 with BSBE1-D01A tuner. Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab

[media] remove the old RC_MAP_HAUPPAUGE_NEW RC map

2011-03-22T22:24:16+00:00

The rc-hauppauge-new map is a messy thing, as it bundles 3 different remote controllers as if they were just one, discarding the address byte. Also, some key maps are wrong. With the conversion to the new rc-core, it is likely that most of the devices won't be working properly, as the i2c driver and the raw decoders are now providing 16 bits for the remote, instead of just 8. delete mode 100644 drivers/media/rc/keymaps/rc-hauppauge-new.c Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jarod Wilson

[media] DVB: Set scanmask for Budget/SAA7146 cards

2010-12-29T10:17:15+00:00

These devices do not return the full command+address, so set scanmask accordingly. Signed-off-by: David Henningsson Signed-off-by: Mauro Carvalho Chehab

[media] Rename all public generic RC functions from ir_ to rc_

2010-12-29T10:16:50+00:00

Those functions are not InfraRed specific. So, rename them to properly reflect it. Signed-off-by: Mauro Carvalho Chehab

[media] rc: rename the remaining things to rc_core

2010-12-29T10:16:50+00:00

The Remote Controller subsystem is meant to be used not only by Infra Red but also for similar types of Remote Controllers. The core is not specific to Infra Red. As such, rename: - ir-core.h to rc-core.h - IR_CORE to RC_CORE - namespace inside rc-core.c/rc-core.h To be consistent with the other changes. No functional change on this patch. Signed-off-by: Mauro Carvalho Chehab