Linux kernel documentation tree maintained by Jonathan Corbet http://mirrors.hust.edu.cn/git/lwn.git/atom?h=v5.10-rc5 2020-11-17T20:00:40+00:00 2020-11-17T20:00:40+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-11-17T20:00:40+00:00 urn:sha1:0fa8ee0d9ab95c9350b8b84574824d9a384a9f7d Pull input fixes from Dmitry Torokhov: "A fix for use-after-free in the Sun keyboard driver, a fix to firmware updates on newer ICs in the Elan touchpad diver, and a couple misc driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - fix firmware update on newer ICs Input: resistive-adc-touch - fix kconfig dependency on IIO_BUFFER Input: sunkbd - avoid use-after-free in teardown paths Input: i8042 - allow insmod to succeed on devices without an i8042 controller Input: adxl34x - clean up a data type in adxl34x_probe() 2020-11-12T04:13:12+00:00 jingle.wu jingle.wu@emc.com.tw 2020-11-12T04:06:24+00:00 urn:sha1:ae3d6083acf60116d4f409677452399547ed2009 The argument to iap page type command depends on the firmware page size. Fixes: bfd9b92bc8f9 ("Input: elan_i2c - handle firmware updated on newer ICs") Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2020-11-12T01:50:12+00:00 Necip Fazil Yildiran fazilyildiran@gmail.com 2020-11-12T01:48:52+00:00 urn:sha1:676650d007e06fddcf3fe38238251d71bd179641 When TOUCHSCREEN_ADC is enabled and IIO_BUFFER is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for IIO_BUFFER_CB Depends on [n]: IIO [=y] && IIO_BUFFER [=n] Selected by [y]: - TOUCHSCREEN_ADC [=y] && !UML && INPUT [=y] && INPUT_TOUCHSCREEN [=y] && IIO [=y] The reason is that TOUCHSCREEN_ADC selects IIO_BUFFER_CB without depending on or selecting IIO_BUFFER while IIO_BUFFER_CB depends on IIO_BUFFER. This can also fail building the kernel. Honor the kconfig dependency to remove unmet direct dependency warnings and avoid any potential build failures. Fixes: aa132ffb6b0a ("input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20201102221504.541279-1-fazilyildiran@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2020-11-09T05:59:07+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2020-10-26T20:36:17+00:00 urn:sha1:77e70d351db7de07a46ac49b87a6c3c7a60fca7e We need to make sure we cancel the reinit work before we tear down the driver structures. Reported-by: Bodong Zhao <nopitydays@gmail.com> Tested-by: Bodong Zhao <nopitydays@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2020-10-27T03:56:28+00:00 Hans de Goede hdegoede@redhat.com 2020-10-27T03:53:57+00:00 urn:sha1:b1884583fcd17d6a1b1bba94bbb5826e6b5c6e17 The i8042 module exports several symbols which may be used by other modules. Before this commit it would refuse to load (when built as a module itself) on systems without an i8042 controller. This is a problem specifically for the asus-nb-wmi module. Many Asus laptops support the Asus WMI interface. Some of them have an i8042 controller and need to use i8042_install_filter() to filter some kbd events. Other models do not have an i8042 controller (e.g. they use an USB attached kbd). Before this commit the asus-nb-wmi driver could not be loaded on Asus models without an i8042 controller, when the i8042 code was built as a module (as Arch Linux does) because the module_init function of the i8042 module would fail with -ENODEV and thus the i8042_install_filter symbol could not be loaded. This commit fixes this by exiting from module_init with a return code of 0 if no controller is found. It also adds a i8042_present bool to make the module_exit function a no-op in this case and also adds a check for i8042_present to the exported i8042_command function. The latter i8042_present check should not really be necessary because when builtin that function can already be used on systems without an i8042 controller, but better safe then sorry. Reported-and-tested-by: Marius Iacob <themariusus@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201008112628.3979-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2020-10-27T03:56:27+00:00 Dan Carpenter dan.carpenter@oracle.com 2020-10-27T00:10:09+00:00 urn:sha1:33b6c39e747c552fa770eecebd1776f1f4a222b1 The "revid" is used to store negative error codes so it should be an int type. Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20201026072824.GA1620546@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2020-10-25T17:59:34+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-25T17:59:34+00:00 urn:sha1:f9c25d98645ec4af00c01a70681d2d4ab71622d0 Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time 2020-10-24T17:33:08+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-24T17:33:08+00:00 urn:sha1:e731f3146ff3bba5424b40140e1a7e6f92e94964 Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ... 2020-10-23T23:16:31+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-23T23:16:31+00:00 urn:sha1:bd7e8c996f5aba542f416ee6d19e91fd3668674f Pull input updates from Dmitry Torokhov: - a new driver for ADC driven joysticks - a new Zintix touchscreen driver - enhancements to Intel SoC button array driver - support for F3A "function" in Synaptics RMI4 driver - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: Add MAINTAINERS entry for SiS i2c touch input driver Input: evdev - per-client waitgroups Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1 Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2 Input: synaptics-rmi4 - support bootloader v8 in f34v7 Input: synaptics-rmi4 - add support for F3A Input: synaptics-rmi4 - rename f30_data to gpio_data Input: add zinitix touchscreen driver dt-bindings: input/touchscreen: add bindings for zinitix Input: joystick - add ADC attached joystick driver. dt-bindings: input: Add docs for ADC driven joystick Input: sun4i-ps2 - fix handling of platform_get_irq() error Input: twl4030_keypad - fix handling of platform_get_irq() error Input: omap4-keypad - fix handling of platform_get_irq() error Input: ep93xx_keypad - fix handling of platform_get_irq() error Input: stmfts - fix a & vs && typo Input: imx6ul_tsc - unify open/close and PM paths Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume() Input: elants_i2c - fix typo for an attribute to show calibration count Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information. ... 2020-10-23T17:54:13+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-23T17:54:13+00:00 urn:sha1:090a7d046fedaaaf41fcdd84ca11764fa5d35233 Pull chrome platform updates from Benson Leung: "cros-ec: - Error code cleanup across cros-ec by Guenter - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status cros_ec_typec: - Landed initial USB4 support in typec connector class driver for cros_ec - Role switch bugfix on disconnect, and reordering configuration steps cros_ec_lightbar: - Fix buffer outsize and result for get_lightbar_version misc: - Remove config MFD_CROS_EC, now that transition from MFD is complete - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard keymap" * tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA platform/chrome: Use kobj_to_dev() instead of container_of() platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer() platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command platform/chrome: cros_ec_trace: Add fields to command traces platform/chrome: cros_ec_typec: Re-order connector configuration steps platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role() platform/chrome: cros_ec_typec: USB4 support pwm: cros-ec: Simplify EC error handling platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status platform/chrome: cros_ec_sysfs: Report range of error codes from EC cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code