lwn.git/drivers/infiniband, branch v6.6-rc3

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2023-09-02T19:02:41+00:00

Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas) and the usual minor updates and bug fixes but no significant core changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (116 commits) scsi: storvsc: Handle additional SRB status values scsi: libsas: Delete sas_ata_task.retry_count scsi: libsas: Delete sas_ata_task.stp_affil_pol scsi: libsas: Delete sas_ata_task.set_affil_pol scsi: libsas: Delete sas_ssp_task.task_prio scsi: libsas: Delete sas_ssp_task.enable_first_burst scsi: libsas: Delete sas_ssp_task.retry_count scsi: libsas: Delete struct scsi_core scsi: libsas: Delete enum sas_phy_type scsi: libsas: Delete enum sas_class scsi: libsas: Delete sas_ha_struct.lldd_module scsi: target: Fix write perf due to unneeded throttling scsi: lpfc: Do not abuse UUID APIs and LPFC_COMPRESS_VMID_SIZE scsi: pm8001: Remove unused declarations scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock scsi: elx: sli4: Remove code duplication scsi: bfa: Replace one-element array with flexible-array member in struct fc_rscn_pl_s scsi: qla2xxx: Remove unused declarations scsi: pmcraid: Use pci_dev_id() to simplify the code scsi: pm80xx: Set RETFIS when requested by libsas ...

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2023-09-01T23:49:33+00:00

Pull rdma updates from Jason Gunthorpe: "Many small changes across the subystem, some highlights: - Usual driver cleanups in qedr, siw, erdma, hfi1, mlx4/5, irdma, mthca, hns, and bnxt_re - siw now works over tunnel and other netdevs with a MAC address by removing assumptions about a MAC/GID from the connection manager - "Doorbell Pacing" for bnxt_re - this is a best effort scheme to allow userspace to slow down the doorbell rings if the HW gets full - irdma egress VLAN priority, better QP/WQ sizing - rxe bug fixes in queue draining and srq resizing - Support more ethernet speed options in the core layer - DMABUF support for bnxt_re - Multi-stage MTT support for erdma to allow much bigger MR registrations - A irdma fix with a CVE that came in too late to go to -rc, missing bounds checking for 0 length MRs" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (87 commits) IB/hfi1: Reduce printing of errors during driver shut down RDMA/hfi1: Move user SDMA system memory pinning code to its own file RDMA/hfi1: Use list_for_each_entry() helper RDMA/mlx5: Fix trailing */ formatting in block comment RDMA/rxe: Fix redundant break statement in switch-case. RDMA/efa: Fix wrong resources deallocation order RDMA/siw: Call llist_reverse_order in siw_run_sq RDMA/siw: Correct wrong debug message RDMA/siw: Balance the reference of cep->kref in the error path Revert "IB/isert: Fix incorrect release of isert connection" RDMA/bnxt_re: Fix kernel doc errors RDMA/irdma: Prevent zero-length STAG registration RDMA/erdma: Implement hierarchical MTT RDMA/erdma: Refactor the storage structure of MTT entries RDMA/erdma: Renaming variable names and field names of struct erdma_mem RDMA/hns: Support hns HW stats RDMA/hns: Dump whole QP/CQ/MR resource in raw RDMA/irdma: Add missing kernel-doc in irdma_setup_umode_qp() RDMA/mlx4: Copy union directly RDMA/irdma: Drop unused kernel push code ...

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2023-08-29T18:33:01+00:00

Pull networking updates from Paolo Abeni: "Core: - Increase size limits for to-be-sent skb frag allocations. This allows tun, tap devices and packet sockets to better cope with large writes operations - Store netdevs in an xarray, to simplify iterating over netdevs - Refactor nexthop selection for multipath routes - Improve sched class lifetime handling - Add backup nexthop ID support for bridge - Implement drop reasons support in openvswitch - Several data races annotations and fixes - Constify the sk parameter of routing functions - Prepend kernel version to netconsole message Protocols: - Implement support for TCP probing the peer being under memory pressure - Remove hard coded limitation on IPv6 specific info placement inside the socket struct - Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per socket scaling factor - Scaling-up the IPv6 expired route GC via a separated list of expiring routes - In-kernel support for the TLS alert protocol - Better support for UDP reuseport with connected sockets - Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR header size - Get rid of additional ancillary per MPTCP connection struct socket - Implement support for BPF-based MPTCP packet schedulers - Format MPTCP subtests selftests results in TAP - Several new SMC 2.1 features including unique experimental options, max connections per lgr negotiation, max links per lgr negotiation BPF: - Multi-buffer support in AF_XDP - Add multi uprobe BPF links for attaching multiple uprobes and usdt probes, which is significantly faster and saves extra fds - Implement an fd-based tc BPF attach API (TCX) and BPF link support on top of it - Add SO_REUSEPORT support for TC bpf_sk_assign - Support new instructions from cpu v4 to simplify the generated code and feature completeness, for x86, arm64, riscv64 - Support defragmenting IPv(4|6) packets in BPF - Teach verifier actual bounds of bpf_get_smp_processor_id() and fix perf+libbpf issue related to custom section handling - Introduce bpf map element count and enable it for all program types - Add a BPF hook in sys_socket() to change the protocol ID from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy - Introduce bpf_me_mcache_free_rcu() and fix OOM under stress - Add uprobe support for the bpf_get_func_ip helper - Check skb ownership against full socket - Support for up to 12 arguments in BPF trampoline - Extend link_info for kprobe_multi and perf_event links Netfilter: - Speed-up process exit by aborting ruleset validation if a fatal signal is pending - Allow NLA_POLICY_MASK to be used with BE16/BE32 types Driver API: - Page pool optimizations, to improve data locality and cache usage - Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need for raw ioctl() handling in drivers - Simplify genetlink dump operations (doit/dumpit) providing them the common information already populated in struct genl_info - Extend and use the yaml devlink specs to [re]generate the split ops - Introduce devlink selective dumps, to allow SF filtering SF based on handle and other attributes - Add yaml netlink spec for netlink-raw families, allow route, link and address related queries via the ynl tool - Remove phylink legacy mode support - Support offload LED blinking to phy - Add devlink port function attributes for IPsec New hardware / drivers: - Ethernet: - Broadcom ASP 2.0 (72165) ethernet controller - MediaTek MT7988 SoC - Texas Instruments AM654 SoC - Texas Instruments IEP driver - Atheros qca8081 phy - Marvell 88Q2110 phy - NXP TJA1120 phy - WiFi: - MediaTek mt7981 support - Can: - Kvaser SmartFusion2 PCI Express devices - Allwinner T113 controllers - Texas Instruments tcan4552/4553 chips - Bluetooth: - Intel Gale Peak - Qualcomm WCN3988 and WCN7850 - NXP AW693 and IW624 - Mediatek MT2925 Drivers: - Ethernet NICs: - nVidia/Mellanox: - mlx5: - support UDP encapsulation in packet offload mode - IPsec packet offload support in eswitch mode - improve aRFS observability by adding new set of counters - extends MACsec offload support to cover RoCE traffic - dynamic completion EQs - mlx4: - convert to use auxiliary bus instead of custom interface logic - Intel - ice: - implement switchdev bridge offload, even for LAG interfaces - implement SRIOV support for LAG interfaces - igc: - add support for multiple in-flight TX timestamps - Broadcom: - bnxt: - use the unified RX page pool buffers for XDP and non-XDP - use the NAPI skb allocation cache - OcteonTX2: - support Round Robin scheduling HTB offload - TC flower offload support for SPI field - Freescale: - add XDP_TX feature support - AMD: - ionic: add support for PCI FLR event - sfc: - basic conntrack offload - introduce eth, ipv4 and ipv6 pedit offloads - ST Microelectronics: - stmmac: maximze PTP timestamping resolution - Virtual NICs: - Microsoft vNIC: - batch ringing RX queue doorbell on receiving packets - add page pool for RX buffers - Virtio vNIC: - add per queue interrupt coalescing support - Google vNIC: - add queue-page-list mode support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add port range matching tc-flower offload - permit enslavement to netdevices with uppers - Ethernet embedded switches: - Marvell (mv88e6xxx): - convert to phylink_pcs - Renesas: - r8A779fx: add speed change support - rzn1: enables vlan support - Ethernet PHYs: - convert mv88e6xxx to phylink_pcs - WiFi: - Qualcomm Wi-Fi 7 (ath12k): - extremely High Throughput (EHT) PHY support - RealTek (rtl8xxxu): - enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU), RTL8192EU and RTL8723BU - RealTek (rtw89): - Introduce Time Averaged SAR (TAS) support - Connector: - support for event filtering" * tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits) net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler net: stmmac: clarify difference between "interface" and "phy_interface" r8152: add vendor/device ID pair for D-Link DUB-E250 devlink: move devlink_notify_register/unregister() to dev.c devlink: move small_ops definition into netlink.c devlink: move tracepoint definitions into core.c devlink: push linecard related code into separate file devlink: push rate related code into separate file devlink: push trap related code into separate file devlink: use tracepoint_enabled() helper devlink: push region related code into separate file devlink: push param related code into separate file devlink: push resource related code into separate file devlink: push dpipe related code into separate file devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper devlink: push shared buffer related code into separate file devlink: push port related code into separate file devlink: push object register/unregister notifications into separate helpers inet: fix IP_TRANSPARENT error handling ...

Merge tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

2023-08-28T16:31:32+00:00

Pull vfs timestamp updates from Christian Brauner: "This adds VFS support for multi-grain timestamps and converts tmpfs, xfs, ext4, and btrfs to use them. This carries acks from all relevant filesystems. The VFS always uses coarse-grained timestamps when updating the ctime and mtime after a change. This has the benefit of allowing filesystems to optimize away a lot of metadata updates, down to around 1 per jiffy, even when a file is under heavy writes. Unfortunately, this has always been an issue when we're exporting via NFSv3, which relies on timestamps to validate caches. A lot of changes can happen in a jiffy, so timestamps aren't sufficient to help the client decide to invalidate the cache. Even with NFSv4, a lot of exported filesystems don't properly support a change attribute and are subject to the same problems with timestamp granularity. Other applications have similar issues with timestamps (e.g., backup applications). If we were to always use fine-grained timestamps, that would improve the situation, but that becomes rather expensive, as the underlying filesystem would have to log a lot more metadata updates. This introduces fine-grained timestamps that are used when they are actively queried. This uses the 31st bit of the ctime tv_nsec field to indicate that something has queried the inode for the mtime or ctime. When this flag is set, on the next mtime or ctime update, the kernel will fetch a fine-grained timestamp instead of the usual coarse-grained one. As POSIX generally mandates that when the mtime changes, the ctime must also change the kernel always stores normalized ctime values, so only the first 30 bits of the tv_nsec field are ever used. Filesytems can opt into this behavior by setting the FS_MGTIME flag in the fstype. Filesystems that don't set this flag will continue to use coarse-grained timestamps. Various preparatory changes, fixes and cleanups are included: - Fixup all relevant places where POSIX requires updating ctime together with mtime. This is a wide-range of places and all maintainers provided necessary Acks. - Add new accessors for inode->i_ctime directly and change all callers to rely on them. Plain accesses to inode->i_ctime are now gone and it is accordingly rename to inode->__i_ctime and commented as requiring accessors. - Extend generic_fillattr() to pass in a request mask mirroring in a sense the statx() uapi. This allows callers to pass in a request mask to only get a subset of attributes filled in. - Rework timestamp updates so it's possible to drop the @now parameter the update_time() inode operation and associated helpers. - Add inode_update_timestamps() and convert all filesystems to it removing a bunch of open-coding" * tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits) btrfs: convert to multigrain timestamps ext4: switch to multigrain timestamps xfs: switch to multigrain timestamps tmpfs: add support for multigrain timestamps fs: add infrastructure for multigrain timestamps fs: drop the timespec64 argument from update_time xfs: have xfs_vn_update_time gets its own timestamp fat: make fat_update_time get its own timestamp fat: remove i_version handling from fat_update_time ubifs: have ubifs_update_time use inode_update_timestamps btrfs: have it use inode_update_timestamps fs: drop the timespec64 arg from generic_update_time fs: pass the request_mask to generic_fillattr fs: remove silly warning from current_time gfs2: fix timestamp handling on quota inodes fs: rename i_ctime field to __i_ctime selinux: convert to ctime accessor functions security: convert to ctime accessor functions apparmor: convert to ctime accessor functions sunrpc: convert to ctime accessor functions ...

Merge branch 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

2023-08-24T18:32:18+00:00

Leon Romanovsky says: ==================== mlx5 MACsec RoCEv2 support From Patrisious: This series extends previously added MACsec offload support to cover RoCE traffic either. In order to achieve that, we need configure MACsec with offload between the two endpoints, like below: REMOTE_MAC=10:70:fd:43:71:c0 * ip addr add 1.1.1.1/16 dev eth2 * ip link set dev eth2 up * ip link add link eth2 macsec0 type macsec encrypt on * ip macsec offload macsec0 mac * ip macsec add macsec0 tx sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16 * ip macsec add macsec0 rx port 1 address $REMOTE_MAC * ip macsec add macsec0 rx port 1 address $REMOTE_MAC sa 0 pn 1 on key 01 ead3664f508eb06c40ac7104cdae4ce5 * ip addr add 10.1.0.1/16 dev macsec0 * ip link set dev macsec0 up And in a similar manner on the other machine, while noting the keys order would be reversed and the MAC address of the other machine. RDMA traffic is separated through relevant GID entries and in case of IP ambiguity issue - meaning we have a physical GIDs and a MACsec GIDs with the same IP/GID, we disable our physical GID in order to force the user to only use the MACsec GID. v0: https://lore.kernel.org/netdev/20230813064703.574082-1-leon@kernel.org/ * 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: RDMA/mlx5: Handles RoCE MACsec steering rules addition and deletion net/mlx5: Add RoCE MACsec steering infrastructure in core net/mlx5: Configure MACsec steering for ingress RoCEv2 traffic net/mlx5: Configure MACsec steering for egress RoCEv2 traffic IB/core: Reorder GID delete code for RoCE net/mlx5: Add MACsec priorities in RDMA namespaces RDMA/mlx5: Implement MACsec gid addition and deletion net/mlx5: Maintain fs_id xarray per MACsec device inside macsec steering net/mlx5: Remove netdevice from MACsec steering net/mlx5e: Move MACsec flow steering and statistics database from ethernet to core net/mlx5e: Rename MACsec flow steering functions/parameters to suit core naming style net/mlx5: Remove dependency of macsec flow steering on ethernet net/mlx5e: Move MACsec flow steering operations to be used as core library macsec: add functions to get macsec real netdevice and check offload ==================== Link: https://lore.kernel.org/r/20230821073833.59042-1-leon@kernel.org Signed-off-by: Jakub Kicinski

mlx4: Connect the infiniband part to the auxiliary bus

2023-08-23T07:25:28+00:00

Use the auxiliary bus to perform device management of the infiniband part of the mlx4 driver. Signed-off-by: Petr Pavlu Tested-by: Leon Romanovsky Reviewed-by: Leon Romanovsky Acked-by: Tariq Toukan Signed-off-by: David S. Miller

mlx4: Replace the mlx4_interface.event callback with a notifier

2023-08-23T07:25:27+00:00

Use a notifier to implement mlx4_dispatch_event() in preparation to switch mlx4_en and mlx4_ib to be an auxiliary device. A problem is that if the mlx4_interface.event callback was replaced with something as mlx4_adrv.event then the implementation of mlx4_dispatch_event() would need to acquire a lock on a given device before executing this callback. That is necessary because otherwise there is no guarantee that the associated driver cannot get unbound when the callback is running. However, taking this lock is not possible because mlx4_dispatch_event() can be invoked from the hardirq context. Using an atomic notifier allows the driver to accurately record when it wants to receive these events and solves this problem. A handler registration is done by both mlx4_en and mlx4_ib at the end of their mlx4_interface.add callback. This matches the current situation when mlx4_add_device() would enable events for a given device immediately after this callback, by adding the device on the mlx4_priv.list. Signed-off-by: Petr Pavlu Tested-by: Leon Romanovsky Acked-by: Tariq Toukan Reviewed-by: Leon Romanovsky Signed-off-by: David S. Miller

mlx4: Use 'void *' as the event param of mlx4_dispatch_event()

2023-08-23T07:25:27+00:00

Function mlx4_dispatch_event() takes an 'unsigned long' as its event parameter. The actual value is none (MLX4_DEV_EVENT_CATASTROPHIC_ERROR), a pointer to mlx4_eqe (MLX4_DEV_EVENT_PORT_MGMT_CHANGE), or a 32-bit integer (remaining events). In preparation to switch mlx4_en and mlx4_ib to be an auxiliary device, the mlx4_interface.event callback is replaced with a notifier and function mlx4_dispatch_event() gets updated to invoke atomic_notifier_call_chain(). This requires forwarding the input 'param' value from the former function to the latter. A problem is that the notifier call takes 'void *' as its 'param' value, compared to 'unsigned long' used by mlx4_dispatch_event(). Re-passing the value would need either punning it to 'void *' or passing down the address of the input 'param'. Both approaches create a number of unnecessary casts. Change instead the input 'param' of mlx4_dispatch_event() from 'unsigned long' to 'void *'. A mlx4_eqe pointer can be passed directly, callers using an int value are adjusted to pass its address. Signed-off-by: Petr Pavlu Reviewed-by: Leon Romanovsky Signed-off-by: David S. Miller

mlx4: Get rid of the mlx4_interface.get_dev callback

2023-08-23T07:25:27+00:00

Simplify the mlx4 driver interface by removing mlx4_get_protocol_dev() and the associated mlx4_interface.get_dev callbacks. This is done in preparation to use an auxiliary bus to model the mlx4 driver structure. The change is motivated by the following situation: * The mlx4_en interface is being initialized by mlx4_en_add() and mlx4_en_activate(). * The latter activate function calls mlx4_en_init_netdev() -> register_netdev() to register a new net_device. * A netdev event NETDEV_REGISTER is raised for the device. * The netdev notififier mlx4_ib_netdev_event() is called and it invokes mlx4_ib_scan_netdevs() -> mlx4_get_protocol_dev() -> mlx4_en_get_netdev() [via mlx4_interface.get_dev]. This chain creates a problem when mlx4_en gets switched to be an auxiliary driver. It contains two device calls which would both need to take a respective device lock. Avoid this situation by updating mlx4_ib_scan_netdevs() to no longer call mlx4_get_protocol_dev() but instead to utilize the information passed in net_device.parent and net_device.dev_port. This data is sufficient to determine that an updated port is one that the mlx4_ib driver should take care of and to keep mlx4_ib_dev.iboe.netdevs up to date. Following that, update mlx4_ib_get_netdev() to also not call mlx4_get_protocol_dev() and instead scan all current netdevs to find find a matching one. Note that mlx4_ib_get_netdev() is called early from ib_register_device() and cannot use data tracked in mlx4_ib_dev.iboe.netdevs which is not at that point yet set. Finally, remove function mlx4_get_protocol_dev() and the mlx4_interface.get_dev callbacks (only mlx4_en_get_netdev()) as they became unused. Signed-off-by: Petr Pavlu Tested-by: Leon Romanovsky Reviewed-by: Leon Romanovsky Acked-by: Tariq Toukan Signed-off-by: David S. Miller

IB/hfi1: Reduce printing of errors during driver shut down

2023-08-22T14:31:45+00:00

The driver prints unnecessary prints for error conditions on shutdown remove them to quiet it down. Signed-off-by: Douglas Miller Signed-off-by: Dennis Dalessandro Link: https://lore.kernel.org/r/169271327832.1855761.3756156924805531643.stgit@awfm-02.cornelisnetworks.com Signed-off-by: Leon Romanovsky