lwn.git/drivers/infiniband, branch next

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2014-05-23T22:29:43+00:00

Pull networking fixes from David Miller: "It looks like a sizeble collection but this is nearly 3 weeks of bug fixing while you were away. 1) Fix crashes over IPSEC tunnels with NAT, the latter can reroute the packet through a non-IPSEC protected path and the code has to be able to handle SKBs attached to routes lacking an attached xfrm state. From Steffen Klassert. 2) Fix OOPSs in ipv4 and ipv6 ipsec layers for unsupported sub-protocols, also from Steffen Klassert. 3) Set local_df on fragmented netfilter skbs otherwise we won't be able to forward successfully, from Florian Westphal. 4) cdc_mbim ipv6 neighbour code does __vlan_find_dev_deep without holding RCU lock, from Bjorn Mork. 5) local_df test in ip_may_fragment is inverted, from Florian Westphal. 6) jme driver doesn't check for DMA mapping failures, from Neil Horman. 7) qlogic driver doesn't calculate number of TX queues properly, from Shahed Shaikh. 8) fib_info_cnt can drift irreversibly positive if we fail to allocate the fi->fib_metrics array, from Sergey Popovich. 9) Fix use after free in ip6_route_me_harder(), also from Sergey Popovich. 10) When SYSCTL is disabled, we don't handle local_port_range and ping_group_range defaults properly at all, from Cong Wang. 11) Unaccelerated VLAN tagged frames improperly handled by cdc_mbim driver, fix from Bjorn Mork. 12) cassini driver needs nested lock annotations for TX locking, from Emil Goode. 13) On init error ipv6 VTI driver can unregister pernet ops twice, oops. Fix from Mahtias Krause. 14) If macvlan device is down, don't propagate IFF_ALLMULTI changes, from Peter Christensen. 15) Missing NULL pointer check while parsing netlink config options in ip6_tnl_validate(). From Susant Sahani. 16) Fix handling of neighbour entries during ipv6 router reachability probing, from Duan Jiong. 17) x86 and s390 JIT address randomization has some address calculation bugs leading to crashes, from Alexei Starovoitov and Heiko Carstens. 18) Clear up those uglies with nop patching and net_get_random_once(), from Hannes Frederic Sowa. 19) Option length miscalculated in ip6_append_data(), fix also from Hannes Frederic Sowa. 20) A while ago we fixed a race during device unregistry when a namespace went down, turns out there is a second place that needs similar protection. From Cong Wang. 21) In the new Altera TSE driver multicast filtering isn't working, disable it and just use promisc mode until the cause is found. From Vince Bridgers. 22) When we disable router enabling in ipv6 we have to flush the cached routes explicitly, from Duan Jiong. 23) NBMA tunnels should not cache routes on the tunnel object because the key is variable, from Timo Teräs. 24) With stacked devices GRO information in skb->cb[] can be not setup properly, make sure it is in all code paths. From Eric Dumazet. 25) Really fix stacked vlan locking, multiple levels of nesting with intervening non-vlan devices are possible. From Vlad Yasevich. 26) Fallback ipip tunnel device's mtu is not setup properly, from Steffen Klassert. 27) The packet scheduler's tcindex filter can crash because we structure copy objects with list_head's inside, oops. From Cong Wang. 28) Fix CHECKSUM_COMPLETE handling for ipv6 GRE tunnels, from Eric Dumazet. 29) In some configurations 'itag' in __mkroute_input() can end up being used uninitialized because of how fib_validate_source() works. Fix it by explitly initializing itag to zero like all the other fib_validate_source() callers do, from Li RongQing" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) batman: fix a bogus warning from batadv_is_on_batman_iface() ipv4: initialise the itag variable in __mkroute_input bonding: Send ALB learning packets using the right source bonding: Don't assume 802.1Q when sending alb learning packets. net: doc: Update references to skb->rxhash stmmac: Remove unbalanced clk_disable call ipv6: gro: fix CHECKSUM_COMPLETE support net_sched: fix an oops in tcindex filter can: peak_pci: prevent use after free at netdev removal ip_tunnel: Initialize the fallback device properly vlan: Fix build error wth vlan_get_encap_level() can: c_can: remove obsolete STRICT_FRAME_ORDERING Kconfig option MAINTAINERS: Pravin Shelar is Open vSwitch maintainer. bnx2x: Convert return 0 to return rc bonding: Fix alb mode to only use first level vlans. bonding: Fix stacked device detection in arp monitoring macvlan: Fix lockdep warnings with stacked macvlan devices vlan: Fix lockdep warning with stacked vlan devices. net: Allow for more then a single subclass for netif_addr_lock net: Find the nesting level of a given device by type. ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2014-05-21T09:03:14+00:00

Pull scsi target fixes from Nicholas Bellinger: "This series include: - Close race between iser-target network portal shutdown + accepting new connection logins (sagi) - Fix free-after-use regression in tcm_fc post conversion to percpu-ida pre-allocation (nab) - Explicitly disable Immediate + Unsolicited Data for iser-target connections when T10-PI is enabled (sagi + nab) - Allow pi_prot_type + emulate_write_cache attributes to be set to zero regardless of backend support (andy) - memory leak fix (mikulas)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: fix memory leak on XCOPY target: Don't allow setting WC emulation if device doesn't support iscsi-target: Disable Immediate + Unsolicited Data with ISER Protection tcm_fc: Fix free-after-use regression in ft_free_cmd iscsi-target: Change BUG_ON to REJECT in iscsit_process_nop_out Target/iscsi,iser: Avoid accepting transport connections during stop stage Target/iser: Fix iscsit_accept_np and rdma_cm racy flow Target/iser: Fix wrong connection requests list addition target: Allow non-supporting backends to set pi_prot_type to 0

IB/mlx4: Invoke UPDATE_QP for proxy QP1 on MAC changes

2014-05-16T19:12:45+00:00

When we receive a netdev event indicating a netdev change and/or a netdev address change, we must change the MAC index used by the proxy QP1 (in the QP context), otherwise RoCE CM packets sent by the VF will not carry the same source MAC address as the non-CM packets. We use the UPDATE_QP command to perform this change. In order to avoid modifying a QP context based on netdev event, while the driver attempts to destroy this QP (e.g either the mlx4_ib or ib_mad modules are unloaded), we use mutex locking in both flows. Since the relevant mlx4 proxy GSI QP is created indirectly by the mad module when they create their GSI QP, the mlx4 didn't need to keep track on that QP prior to this change. Now, when QP modifications are needed to this QP from within the driver, we added refernece to it. Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

Target/iscsi,iser: Avoid accepting transport connections during stop stage

2014-05-16T00:09:11+00:00

When the target is in stop stage, iSER transport initiates RDMA disconnects. The iSER initiator may wish to establish a new connection over the still existing network portal. In this case iSER transport should not accept and resume new RDMA connections. In order to learn that, iscsi_np is added with enabled flag so the iSER transport can check when deciding weather to accept and resume a new connection request. The iscsi_np is enabled after successful transport setup, and disabled before iscsi_np login threads are cleaned up. Signed-off-by: Sagi Grimberg Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger

Target/iser: Fix iscsit_accept_np and rdma_cm racy flow

2014-05-16T00:09:10+00:00

RDMA CM and iSCSI target flows are asynchronous and completely uncorrelated. Relying on the fact that iscsi_accept_np will be called after CM connection request event and will wait for it is a mistake. When attempting to login to a few targets this flow is racy and unpredictable, but for parallel login to dozens of targets will race and hang every time. The correct synchronizing mechanism in this case is pending on a semaphore rather than a wait_for_event. We keep the pending interruptible for iscsi_np cleanup stage. (Squash patch to remove dead code into parent - nab) Reported-by: Slava Shwartsman Signed-off-by: Sagi Grimberg Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger

Target/iser: Fix wrong connection requests list addition

2014-05-16T00:09:10+00:00

Should be adding list_add_tail($new, $head) and not the other way around. Signed-off-by: Sagi Grimberg Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger

RDMA/cxgb4: Update Kconfig to include Chelsio T5 adapter

2014-04-29T00:29:41+00:00

Signed-off-by: Hariprasad Shenai Signed-off-by: Roland Dreier

RDMA/cxgb4: Only allow kernel db ringing for T4 devs

2014-04-29T00:29:41+00:00

The whole db drop avoidance stuff is for T4 only. So we cannot allow that to be enabled for T5 devices. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier

RDMA/cxgb4: Force T5 connections to use TAHOE congestion control

2014-04-29T00:29:41+00:00

This is required to work around a T5 HW issue. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier

RDMA/cxgb4: Fix endpoint mutex deadlocks

2014-04-29T00:29:41+00:00

In cases where the cm calls c4iw_modify_rc_qp() with the endpoint mutex held, they must be called with internal == 1. rx_data() and process_mpa_reply() are not doing this. This causes a deadlock because c4iw_modify_rc_qp() might call c4iw_ep_disconnect() in some !internal cases, and c4iw_ep_disconnect() acquires the endpoint mutex. The design was intended to only do the disconnect for !internal calls. Change rx_data(), FPDU_MODE case, to call c4iw_modify_rc_qp() with internal == 1, and then disconnect only after releasing the mutex. Change process_mpa_reply() to call c4iw_modify_rc_qp(TERMINATE) with internal == 1 and set a new attr flag telling it to send a TERMINATE message. Previously this was implied by !internal. Change process_mpa_reply() to return whether the caller should disconnect after releasing the endpoint mutex. Now rx_data() will do the disconnect in the cases where process_mpa_reply() wants to disconnect after the TERMINATE is sent. Change c4iw_modify_rc_qp() RTS->TERM to only disconnect if !internal, and to send a TERMINATE message if attrs->send_term is 1. Change abort_connection() to not aquire the ep mutex for setting the state, and make all calls to abort_connection() do so with the mutex held. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier