lwn.git/drivers/gpu/drm/tve200, branch docs-5.13

drm/tve200: remove unused including

2020-12-30T10:25:05+00:00

Remove including that don't need it. Signed-off-by: Tian Tao Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/1609291023-46889-1-git-send-email-tiantao6@hisilicon.com

drm/: Constify struct drm_driver

2020-11-06T09:31:26+00:00

Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg Cc: kernel test robot Acked-by: Maxime Ripard Reviewed-by: Alex Deucher Signed-off-by: Daniel Vetter Cc: Sam Ravnborg Cc: Dave Airlie Cc: Gerd Hoffmann Cc: virtualization@lists.linux-foundation.org Cc: Harry Wentland Cc: Leo Li Cc: Alex Deucher Cc: Christian König Cc: Eric Anholt Cc: Maxime Ripard Cc: Ben Skeggs Cc: nouveau@lists.freedesktop.org Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch

drm/tve200: Fix handling of platform_get_irq() error

2020-10-17T07:33:01+00:00

platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: 179c02fe90a4 ("drm/tve200: Add new driver for TVE200") Signed-off-by: Krzysztof Kozlowski Acked-by: Linus Walleij Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200827071107.27429-2-krzk@kernel.org

drm/tve200: Stabilize enable/disable

2020-09-03T19:14:09+00:00

The TVE200 will occasionally print a bunch of lost interrupts and similar dmesg messages, sometimes during boot and sometimes after disabling and coming back to enablement. This is probably because the hardware is left in an unknown state by the boot loader that displays a logo. This can be fixed by bringing the controller into a known state by resetting the controller while enabling it. We retry reset 5 times like the vendor driver does. We also put the controller into reset before de-clocking it and clear all interrupts before enabling the vblank IRQ. This makes the video enable/disable/enable cycle rock solid on the D-Link DIR-685. Tested extensively. Signed-off-by: Linus Walleij Acked-by: Daniel Vetter Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200820203144.271081-1-linus.walleij@linaro.org

drm/tve200: Set GEM CMA functions with DRM_GEM_CMA_DRIVER_OPS

2020-06-10T07:06:11+00:00

DRM_GEM_CMA_DRIVER_OPS sets the functions in struct drm_driver to their defaults. No functional changes are made. Signed-off-by: Thomas Zimmermann Reviewed-by: Linus Walleij Reviewed-by: Emil Velikov Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-41-tzimmermann@suse.de

drm/tve200: Use GEM CMA object functions

2020-06-10T07:06:05+00:00

Create GEM objects with drm_gem_cma_create_object_default_funcs(), which allocates the object and sets CMA's default object functions. Corresponding callbacks in struct drm_driver are cleared. No functional changes are made. Driver and object-function instances use the same callback functions, with the exception of vunmap. The implementation of vunmap is empty and left out in CMA's default object functions. v3: * convert to DRIVER_OPS macro in a separate patch Signed-off-by: Thomas Zimmermann Reviewed-by: Linus Walleij Reviewed-by: Emil Velikov Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-40-tzimmermann@suse.de

drm: get drm_bridge_panel connector via helper

2019-12-09T21:57:26+00:00

The drm_connector created by drm_panel_bridge was accessed via drm_panel.connector. Avoid the detour around drm_panel by providing a simple get method. This avoids direct access to the connector field in drm_panel in the two users. The change is done in preparation for removal of drm_panel.connector. Update pl111 and tve200 to use the new helper. Signed-off-by: Sam Ravnborg Reviewed-by: Laurent Pinchart Reviewed-by: Linus Walleij Cc: Andrzej Hajda Cc: Neil Armstrong Cc: Laurent Pinchart Cc: Jonas Karlman Cc: Jernej Skrabec Cc: Eric Anholt Cc: Linus Walleij Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: David Airlie Cc: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-5-sam@ravnborg.org

drm/bridge: panel: Infer connector type from panel by default

2019-09-08T17:04:23+00:00

The drm panel bridge creates a connector using a connector type explicitly passed by the display controller or bridge driver that instantiates the panel bridge. Now that drm_panel reports its connector type, we can use it to avoid passing an explicit (and often incorrect) connector type to drm_panel_bridge_add() and devm_drm_panel_bridge_add(). Several drivers report incorrect or unknown connector types to userspace. Reporting a different type may result in a breakage. For that reason, rename (devm_)drm_panel_bridge_add() to (devm_)drm_panel_bridge_add_typed(), and add new (devm_)drm_panel_bridge_add() functions that use the panel connector type. Update all callers of (devm_)drm_panel_bridge_add() to the _typed function, they will be converted one by one after testing. The panel drivers have been updated with the following Coccinelle semantic patch, with manual inspection and fixes to indentation. @@ expression bridge; expression dev; expression panel; identifier type; @@ ( -bridge = drm_panel_bridge_add(panel, type); +bridge = drm_panel_bridge_add_typed(panel, type); | -bridge = devm_drm_panel_bridge_add(dev, panel, type); +bridge = devm_drm_panel_bridge_add_typed(dev, panel, type); ) Signed-off-by: Laurent Pinchart Reviewed-by: Boris Brezillon Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-3-laurent.pinchart@ideasonboard.com

drm/tve200: drop use of drmP.h

2019-07-15T16:11:30+00:00

Drop use of the deprecated header drmP.h. Fix so header file became self-contained, and then fixed fallout in the other files. Signed-off-by: Sam Ravnborg Reviewed-by: Linus Walleij Acked-by: Emil Velikov Cc: David Airlie Cc: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20190630061922.7254-5-sam@ravnborg.org

drm/tve2000: Drop drm_gem_prime_export/import

2019-06-21T18:10:55+00:00

They're the default. Aside: Would be really nice to switch the others over to drm_gem_object_funcs. Reviewed-by: Eric Anholt Reviewed-by: Emil Velikov Reviewed-by: Linus Walleij Signed-off-by: Daniel Vetter Cc: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-33-daniel.vetter@ffwll.ch