lwn.git/drivers/gpu/drm/meson/Kconfig, branch master

drm/meson: Allow build with COMPILE_TEST=y

2024-10-25T07:25:10+00:00

Allow meson to be built with COMPILE_TEST=y for greater coverage. Builds fine on x86/x86_64 at least. Cc: Neil Armstrong Cc: linux-amlogic@lists.infradead.org Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-11-ville.syrjala@linux.intel.com Reviewed-by: Neil Armstrong

drm/meson: Run DRM default client setup

2024-09-26T06:28:06+00:00

Call drm_client_setup() to run the kernel's default client setup for DRM. Set fbdev_probe in struct drm_driver, so that the client setup can start the common fbdev client. The meson driver specifies a preferred color mode of 32. As this is the default if no format has been given, leave it out entirely. v5: - select DRM_CLIENT_SELECTION Signed-off-by: Thomas Zimmermann Cc: Neil Armstrong Cc: Kevin Hilman Cc: Jerome Brunet Cc: Martin Blumenstingl Reviewed-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-28-tzimmermann@suse.de

drm/bridge-connector: move to DRM_DISPLAY_HELPER module

2024-09-03T08:18:31+00:00

drm_bridge_connector is a "leaf" driver, belonging to the display helper, rather than the "CRTC" drm_kms_helper module. Move the driver to the drm/display and add necessary Kconfig selection clauses. Suggested-by: Maxime Ripard Acked-by: Maxime Ripard Signed-off-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard

drm/meson: add support for MIPI-DSI transceiver

2023-06-01T14:10:24+00:00

The Amlogic G12A/G12B/SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a), with a custom glue managing the IP resets, clock and data inputs similar to the DW-HDMI Glue on other Amlogic SoCs. This adds support for the Glue managing the transceiver, mimicing the init flow provided by Amlogic to setup the ENCL encoder, the glue, the transceiver, the digital D-PHY and the Analog PHY in the proper way. An optional "MEAS" clock can be enabled to measure the delay between each vsync feeding the DW-MIPI-DSI transceiver. Signed-off-by: Neil Armstrong Reviewed-by: Jagan Teki Reviewed-by: Nicolas Belin Tested-by: Nicolas Belin # on Khadas VIM3 + TS050 Panel Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-12-56eb7a4d5b8e@linaro.org

drm/gem: rename GEM CMA helpers to GEM DMA helpers

2022-08-03T16:31:49+00:00

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg Acked-by: Thomas Zimmermann Reviewed-by: Laurent Pinchart Signed-off-by: Danilo Krummrich Reviewed-by: Liviu Dudau #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com

drm: Remove CONFIG_DRM_KMS_CMA_HELPER option

2021-11-30T10:10:03+00:00

Link drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPER has been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. Selecting KMS helpers and CMA will now automatically enable CMA KMS helpers. Some drivers' Kconfig files did not correctly select KMS or CMA helpers. Fix this as part of the change. Signed-off-by: Thomas Zimmermann Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20211106193509.17472-3-tzimmermann@suse.de

drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR

2021-11-12T09:10:01+00:00

This implements the necessary change to no more use the embedded connector in dw-hdmi and use the dedicated bridge connector driver by passing DRM_BRIDGE_ATTACH_NO_CONNECTOR to the bridge attach call. The necessary connector properties are added to handle the same functionalities as the embedded dw-hdmi connector, i.e. the HDR metadata, the CEC notifier & other flags. The dw-hdmi output_port is set to 1 in order to look for a connector next bridge in order to get DRM_BRIDGE_ATTACH_NO_CONNECTOR working. Signed-off-by: Neil Armstrong Acked-by: Sam Ravnborg Acked-by: Martin Blumenstingl Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-5-narmstrong@baylibre.com

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

2019-05-28T07:39:08+00:00

This picks up rc2 for us as well. Signed-off-by: Maarten Lankhorst

drm/meson: imply dw-hdmi i2s audio for meson hdmi

2019-05-24T08:45:15+00:00

Imply the i2s part of the Synopsys HDMI driver for Amlogic SoCs. This will enable the i2s part by default when meson hdmi driver is enable but let platforms not supported by the audio subsystem disable it if necessary. Signed-off-by: Jerome Brunet Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20190429102325.29022-1-jbrunet@baylibre.com

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman