lwn.git/drivers/gpu/drm/imx/dw_hdmi-imx.c, branch standardize-docs

drm/bridge/synopsys: dw-hdmi: Use bridge->mode_valid() callback

2017-06-05T06:39:50+00:00

Now that we have a callback to check if bridge supports a given mode we can use it in Synopsys Designware HDMI bridge so that we restrict the number of probbed modes to the ones we can actually display. Also, there is no need to use mode_fixup() callback as mode_valid() will handle the mode validation. NOTE: I also had to change the pdata declaration of mode_valid custom callback so that the passed modes are const. I also changed in the platforms I found. Not even compiled it though. Signed-off-by: Jose Abreu Acked-by: Neil Armstrong Acked-by: Philipp Zabel Cc: Carlos Palminha Cc: Daniel Vetter Cc: Archit Taneja Cc: Andrzej Hajda Cc: Laurent Pinchart Cc: David Airlie Cc: Philipp Zabel Cc: Carlo Caione Cc: Kevin Hilman Cc: Mark Yao Cc: Heiko Stuebner Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/3d8d449e4d13d2535fa292c75f5fa931de4a4fa8.1495720737.git.joabreu@synopsys.com

drm: bridge: dw-hdmi: Remove device type from platform data

2017-03-10T10:06:38+00:00

The device type isn't used anymore now that workarounds and PHY-specific operations are performed based on version information read at runtime. Remove it. Signed-off-by: Kieran Bingham Signed-off-by: Laurent Pinchart Tested-by: Neil Armstrong Reviewed-by: Jose Abreu Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-9-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Move IRQ and IO resource allocation to common code

2017-01-18T03:59:32+00:00

There's no need to duplicate identical code in multiple drivers (two at the moment, one more to come soon). Move it to the dw-hdmi core where it can be shared. If resource allocation ever becomes device-specific later we'll always have the option of splitting it out again. While it at pass the platform device to the bind function to avoid having to cast struct device to struct platform_device. Signed-off-by: Laurent Pinchart Reviewed-by: Jose Abreu Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-8-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Remove unneeded arguments to bind/unbind functions

2017-01-18T03:59:30+00:00

The master argument isn't used. The data argument, a void pointer, is used by the bind function only where it's cast to a drm_device pointer, which can easily be obtained from the encoder argument instead. Remove them. Signed-off-by: Laurent Pinchart Reviewed-by: Jose Abreu Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-3-laurent.pinchart+renesas@ideasonboard.com

drm/imx: store internal bus configuration in crtc state

2016-07-12T16:24:28+00:00

The internal bus configuration is imx-drm specific crtc state. Store it in imx_crtc_state and let the encoder atomic_check callbacks determine bus_flags, bus_format and the sync pins, possibly taking into account the mode and the connector display info. The custom imx_drm_encoder structure can be replaced again with drm_encoder. Signed-off-by: Philipp Zabel

drm/imx: remove empty mode_set encoder callbacks

2016-07-12T16:24:27+00:00

With atomic modeset support, these callbacks are optional. Signed-off-by: Philipp Zabel

drm/imx: atomic phase 3 step 2: Legacy callback fixups

2016-07-12T16:24:12+00:00

Now that we can use atomic configurations, all the legacy callbacks of CRTCs, encoders and connectors can be switched to the atomic version. For the imx-ldb driver, there is a clock parent setting mismatch bewteen ->enable and ->disable after the switch, so a fixup is added. For the imx-tve driver, since the encoder's callback ->dpms is replaced by ->disable, we need to move the setting for the IPU_CLK_EN bit(in register TVE_COM_CONF_REG) from ->enable/->disable to ->mode_set, otherwise, the relevant CRTC cannot be disabled correctly with a warning on DC stop timeout. Signed-off-by: Liu Ying Acked-by: Daniel Vetter Signed-off-by: Philipp Zabel

drm/imx: Remove encoders' ->prepare callbacks

2016-07-12T16:23:58+00:00

The main task of imx encoders' ->prepare callbacks is to set bus_format, bus_flags, di_vsync_pin and di_hsync_pin. We may create a structure named imx_encoder to cache them. The atomic encoder callback ->disable may replace ->prepare later, so let's remove ->prepare. Signed-off-by: Liu Ying Acked-by: Daniel Vetter Signed-off-by: Philipp Zabel

drm/imx: dw_hdmi: Don't call platform_set_drvdata()

2016-03-31T09:24:28+00:00

The IMX dw_hdmi driver just called platform_set_drvdata() to get your hopes up that maybe, somehow, you'd be able to retrieve the 'struct imx_hdmi' from a pointer to the 'struct device'. You can't. When we call dw_hdmi_bind() the main driver calls dev_set_drvdata(), which clobbers our setting. Let's just remove the platform_set_drvdata() to avoid dashing people's hopes. Signed-off-by: Douglas Anderson Signed-off-by: Philipp Zabel

drm/imx: dw_hdmi: Call drm_encoder_cleanup() in error path

2016-03-31T09:24:26+00:00

The drm_encoder_cleanup() was missing both from the error path of dw_hdmi_imx_bind(). This caused a crash when slub_debug was enabled and we ended up deferring probe of HDMI at boot. This call isn't needed from unbind() because if dw_hdmi_bind() returns no error then it takes over the job of freeing the encoder (in dw_hdmi_unbind). Signed-off-by: Douglas Anderson Signed-off-by: Philipp Zabel