lwn.git/drivers/gpu/drm/i915/i915_getparam.c, branch docs-6.10

drm/i915/pxp: Optimize GET_PARAM:PXP_STATUS

2023-08-15T20:28:18+00:00

After recent discussions with Mesa folks, it was requested that we optimize i915's GET_PARAM for the PXP_STATUS without changing the UAPI spec. Add these additional optimizations: - If any PXP initializatoin flow failed, then ensure that we catch it so that we can change the returned PXP_STATUS from "2" (i.e. 'PXP is supported but not yet ready') to "-ENODEV". This typically should not happen and if it does, we have a platform configuration issue. - If a PXP arbitration session creation event failed due to incorrect firmware version or blocking SOC fusing or blocking BIOS configuration (platform reasons that won't change if we retry), then reflect that blockage by also returning -ENODEV in the GET_PARAM:PXP_STATUS. - GET_PARAM:PXP_STATUS should not wait at all if PXP is supported but non-i915 dependencies (component-driver / firmware) we are still pending to complete the init flows. In this case, just return "2" immediately (i.e. 'PXP is supported but not yet ready'). Difference from prio revs: v3: - Rebase with latest tip that has pulled in setting the gsc fw load to fail if proxy init fails. v2: - Use a #define for the default readiness timeout (Vivaik). - Improve comments around the failing of proxy-init. v1: - Change the commit msg style to be imperative. (Jani) - Rename timeout to timeout_ms. (Jani) - Fix is_fw_err_platform_config to use higher order param (pxp) first. (Jani) Signed-off-by: Alan Previn Reviewed-by: Balasubrawmanian, Vivaik Signed-off-by: Daniele Ceraolo Spurio Link: https://patchwork.freedesktop.org/patch/msgid/20230802182550.1592926-1-alan.previn.teres.alexis@intel.com

drm/i915/mtl/huc: Use the media gt for the HuC getparam

2023-06-05T16:53:51+00:00

On MTL, for obvious reasons, HuC is only available on the media tile. We already disable SW support for HuC on the root gt due to the absence of VCS engines, but we also need to update the getparam to point to the HuC struct in the media GT. Signed-off-by: Daniele Ceraolo Spurio Cc: John Harrison Reviewed-by: John Harrison Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-7-daniele.ceraolospurio@intel.com

drm/i915/uapi/pxp: Add a GET_PARAM for PXP

2023-05-12T00:26:30+00:00

Because of the additional firmware, component-driver and initialization depedencies required on MTL platform before a PXP context can be created, UMD calling for PXP creation as a way to get-caps can take a long time. An actual real world customer stack has seen this happen in the 4-to-8 second range after the kernel starts (which sees MESA's init appear in the middle of this range as the compositor comes up). To avoid unncessary delays experienced by the UMD for get-caps purposes, add a GET_PARAM for I915_PARAM_PXP_SUPPORT. However, some failures can still occur after all the depedencies are met (such as firmware init flow failure, bios configurations or SOC fusing not allowing PXP enablement). Those scenarios will only be known to user space when it attempts creating a PXP context and is documented in the GEM UAPI headers. While making this change, create a helper that is common to both GET_PARAM caller and intel_pxp_start since the latter does similar checks. Signed-off-by: Alan Previn Reviewed-by: Daniele Ceraolo Spurio Acked-by: Jordan Justen Signed-off-by: Radhakrishna Sripada Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-7-alan.previn.teres.alexis@intel.com

drm/i915/perf: Pass i915 object to perf revision helper

2023-03-24T15:50:16+00:00

In some cases, perf revision may rely on specific steppings of a platform. To determine the platform, pass i915 object to the perf revision helper. Signed-off-by: Umesh Nerlige Ramappa Reviewed-by: Ashutosh Dixit Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-11-umesh.nerlige.ramappa@intel.com

drm/i915: Partial abandonment of legacy DRM logging macros

2022-11-10T12:35:46+00:00

Convert some usages of legacy DRM logging macros into versions which tell us on which device have the events occurred. v2: * Don't have struct drm_device as local. (Jani, Ville) v3: * Store gt, not i915, in workaround list. (John) Signed-off-by: Tvrtko Ursulin Acked-by: Jani Nikula Cc: Jani Nikula Cc: John Harrison Cc: Ville Syrjälä Reviewed-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20221109104633.2579245-1-tvrtko.ursulin@linux.intel.com

drm/i915/perf: Apply Wa_18013179988

2022-10-27T19:36:53+00:00

OA reports in the OA buffer contain an OA timestamp field that helps user calculate delta between 2 OA reports. The calculation relies on the CS timestamp frequency to convert the timestamp value to nanoseconds. The CS timestamp frequency is a function of the CTC_SHIFT value in RPM_CONFIG0. In DG2, OA unit assumes that the CTC_SHIFT is 3, instead of using the actual value from RPM_CONFIG0. At the user level, this results in an error in calculating delta between 2 OA reports since the OA timestamp is not shifted in the same manner as CS timestamp. Also the periodicity of the reports is different from what the user configured because of mismatch in the CS and OA frequencies. The issue also affects MI_REPORT_PERF_COUNT command. To resolve this, return actual OA timestamp frequency to the user in i915_getparam_ioctl, so that user can calculate the right OA exponent as well as interpret the reports correctly. MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18893 v2: - Use REG_FIELD_GET (Ashutosh) - Update commit msg Signed-off-by: Umesh Nerlige Ramappa Reviewed-by: Ashutosh Dixit Signed-off-by: John Harrison Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-13-umesh.nerlige.ramappa@intel.com

drm/i915: move overlay to display.overlay

2022-08-29T10:24:26+00:00

Move display overlay related members under drm_i915_private display sub-struct. Signed-off-by: Jani Nikula Reviewed-by: Lucas De Marchi Reviewed-by: Arun R Murthy Link: https://patchwork.freedesktop.org/patch/msgid/e019fb538536d36bab28feaafe049e0b1726f2d9.1661346845.git.jani.nikula@intel.com

drm/i915/sseu: Disassociate internal subslice mask representation from uapi

2022-06-02T14:20:59+00:00

As with EU masks, it's easier to store subslice/DSS masks internally in a format that's more natural for the driver to work with, and then only covert into the u8[] uapi form when the query ioctl is invoked. Since the hardware design changed significantly with Xe_HP, we'll use a union to choose between the old "hsw-style" subslice masks or the newer xehp mask. HSW-style masks will be stored in an array of u8's, indexed by slice (there's never more than 6 subslices per slice on older platforms). For Xe_HP and beyond where slices no longer exist, we only need a single bitmask. However we already know that this mask is eventually going to grow too large for a simple u64 to hold, so we'll represent it in a manner that can be operated on by the utilities in linux/bitmap.h. v2: - Fix typo: BIT(s) -> BIT(ss) in gen9_sseu_device_status() v3: - Eliminate sseu->ss_stride and just calculate the stride while specifically handling uapi. (Tvrtko) - Use BITMAP_BITS() macro to refer to size of masks rather than passing I915_MAX_SS_FUSE_BITS directly. (Tvrtko) - Report compute/geometry DSS masks separately when dumping Xe_HP SSEU info. (Tvrtko) - Restore dropped range checks to intel_sseu_has_subslice(). (Tvrtko) v4: - Make the bitmap size macro check the size of the .xehp field rather than the containing union. (Tvrtko) - Don't add GEM_BUG_ON() intel_sseu_has_subslice()'s check for whether slice or subslice ID exceed sseu->max_[sub]slices; various loops in the driver are expected to exceed these, so we should just silently return 'false.' v5: - Move XEHP_BITMAP_BITS() to the header so that we can also replace a usage of I915_MAX_SS_FUSE_BITS in one of the inline functions. (Bala) - Change the local variable in intel_slicemask_from_xehp_dssmask() from u16 to 'unsigned long' to make it a bit more future-proof. Cc: Tvrtko Ursulin Cc: Balasubramani Vivekanandan Signed-off-by: Matt Roper Acked-by: Tvrtko Ursulin Reviewed-by: Balasubramani Vivekanandan Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-6-matthew.d.roper@intel.com

drm/i915/xehp: Drop GETPARAM lookups of I915_PARAM_[SUB]SLICE_MASK

2022-06-02T14:19:11+00:00

Slice/subslice/EU information should be obtained via the topology queries provided by the I915_QUERY interface; let's turn off support for the old GETPARAM lookups on Xe_HP and beyond where we can't return meaningful values. The slice mask lookup is meaningless since Xe_HP doesn't support traditional slices (and we make no attempt to return the various new units like gslices, cslices, mslices, etc.) here. The subslice mask lookup is even more problematic; given the distinct masks for geometry vs compute purposes, the combined mask returned here is likely not what userspace would want to act upon anyway. The value is also limited to 32-bits by the nature of the GETPARAM ioctl which is sufficient for the initial Xe_HP platforms, but is unable to convey the larger masks that will be needed on other upcoming platforms. Finally, the value returned here becomes even less meaningful when used on multi-tile platforms where each tile will have its own masks. Signed-off-by: Matt Roper Acked-by: Tvrtko Ursulin Acked-by: Lionel Landwerlin # mesa Reviewed-by: Balasubramani Vivekanandan Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-3-matthew.d.roper@intel.com

Merge tag 'drm-intel-gt-next-2022-02-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next

2022-02-23T20:03:51+00:00

UAPI Changes: - Weak parallel submission support for execlists Minimal implementation of the parallel submission support for execlists backend that was previously only implemented for GuC. Support one sibling non-virtual engine. Core Changes: - Two backmerges of drm/drm-next for header file renames/changes and i915_regs reorganization Driver Changes: - Add new DG2 subplatform: DG2-G12 (Matt R) - Add new DG2 workarounds (Matt R, Ram, Bruce) - Handle pre-programmed WOPCM registers for DG2+ (Daniele) - Update guc shim control programming on XeHP SDV+ (Daniele) - Add RPL-S C0/D0 stepping information (Anusha) - Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas) - Fix KMD and GuC race on accessing PMU busyness (Umesh) - Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh) - Report error on invalid reset notification from GuC (John) - Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston) - Fixes to parallel submission implementation (Matt B.) - Improve GuC loading status check/error reports (John) - Tweak TTM LRU priority hint selection (Matt A.) - Align the plane_vma to min_page_size of stolen mem (Ram) - Introduce vma resources and implement async unbinding (Thomas) - Use struct vma_resource instead of struct vma_snapshot (Thomas) - Return some TTM accel move errors instead of trying memcpy move (Thomas) - Fix a race between vma / object destruction and unbinding (Thomas) - Remove short-term pins from execbuf (Maarten) - Update to GuC version 69.0.3 (John, Michal Wa.) - Improvements to GT reset paths in GuC backend (Matt B.) - Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko) - Use trylock instead of blocking lock when freeing GEM objects (Maarten) - Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.) - Fixes to object unmapping and purging (Matt A) - Check for wedged device in GuC backend (John) - Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten) - Allow dead vm to unbind vma's without lock (Maarten) - s/engine->i915/i915/ for DG2 engine workarounds (Matt R) - Use to_gt() helper for GGTT accesses (Michal Wi.) - Selftest improvements (Matt B., Thomas, Ram) - Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan) From: Joonas Lahtinen Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com Signed-off-by: Rodrigo Vivi [Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch from drm-rerere's 1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip rerere cache update")]