lwn.git/drivers/gpu/drm/armada/armada_fbdev.c, branch standardize-docs

drm/fb-helper: Automatically clean up fb_info

2017-02-07T20:36:28+00:00

Noticed that everyone duplicates the same logic here and we could safe a few lines per driver. Yay for lots of drivers to make such tiny refactors worth-while! v2: Forgot to git add everything :( v3: Actually remove release_fbi (Sean, Emil, Chris) ... Cc: Chris Wilson Cc: Sean Paul Cc: Noralf Trønnes Cc: Emil Velikov Reviewed-by: Sean Paul Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170207161603.17611-1-daniel.vetter@ffwll.ch

drm: Rely on mode_config data for fb_helper initialization

2017-02-02T18:12:00+00:00

Instead of receiving the num_crts as a parameter, we can read it directly from the mode_config structure. I audited the drivers that invoke this helper and I believe all of them initialize the mode_config struct accordingly, prior to calling the fb_helper. I used the following coccinelle hack to make this transformation, except for the function headers and comment updates. The first and second rules are split because I couldn't find a way to remove the unused temporary variables at the same time I removed the parameter. // @r@ expression A,B,D,E; identifier C; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ expression A,B,C,D,E; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ identifier r.C; type T; expression V; @@ - T C; <... when != C - C = V; ...> // Changes since v1: - Rebased on top of the tip of drm-misc-next. - Remove mention to sti since a proper fix got merged. Suggested-by: Daniel Vetter Signed-off-by: Gabriel Krisman Bertazi Reviewed-by: Eric Anholt Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk

drm: Nuke fb->bits_per_pixel

2016-12-15T12:55:34+00:00

Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä Reviewed-by: Laurent Pinchart Reviewed-by: Alex Deucher (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com

drm: Nuke fb->depth

2016-12-15T12:55:33+00:00

Replace uses of fb->depth with fb->format->depth. Less duplicate information is a good thing. @@ struct drm_framebuffer *fb; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - fb->depth = E; ... } @@ struct nouveau_framebuffer *fb; @@ - fb->base.depth + fb->base.format->depth @@ struct drm_framebuffer fb; @@ - fb.depth + fb.format->depth @@ struct drm_framebuffer *fb; @@ - fb->depth + fb->format->depth @@ struct drm_framebuffer fb; @@ - (fb.format->depth) + fb.format->depth @@ struct drm_framebuffer *fb; @@ - (fb->format->depth) + fb->format->depth @@ @@ struct drm_framebuffer { ... - unsigned int depth; ... }; v2: Drop the vmw stuff (Daniel) Rerun spatch due to code changes Signed-off-by: Ville Syrjälä Reviewed-by: Laurent Pinchart Reviewed-by: Alex Deucher Reviewed-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1481751095-18249-1-git-send-email-ville.syrjala@linux.intel.com

drm/armada: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

2016-11-14T06:54:13+00:00

Cc: Russell King Signed-off-by: Stefan Christ Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-5-git-send-email-contact@stefanchrist.eu

drm: Remove superflous linux/fb.h includes

2016-08-12T08:41:39+00:00

Everyone who uses the fbdev emulation helpers doesn't need to include fb.h directly. Remove it. Reviewed-by: Alex Deucher Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-3-git-send-email-daniel.vetter@ffwll.ch

drm/armada: Use new drm_fb_helper functions

2015-08-06T12:12:56+00:00

Use the newly created wrapper drm_fb_helper functions instead of calling core fbdev functions directly. They also simplify the fb_info creation. Cc: Russell King Signed-off-by: Archit Taneja Signed-off-by: Daniel Vetter

drm: Introduce drm_fb_helper_prepare()

2014-07-08T01:31:28+00:00

To implement hotplug detection in a race-free manner, drivers must call drm_kms_helper_poll_init() before hotplug events can be triggered. Such events can be triggered right after any of the encoders or connectors are initialized. At the same time, if the drm_fb_helper_hotplug_event() helper is used by a driver, then the poll helper requires some parts of the FB helper to be initialized to prevent a crash. At the same time, drm_fb_helper_init() requires information that is not necessarily available at such an early stage (number of CRTCs and connectors), so it cannot be used yet. Add a new helper, drm_fb_helper_prepare(), that initializes the bare minimum needed to allow drm_kms_helper_poll_init() to execute and any subsequent hotplug events to be processed properly. Reviewed-by: Daniel Vetter Signed-off-by: Thierry Reding Signed-off-by: Dave Airlie

drm: Constify struct drm_fb_helper_funcs

2014-07-08T01:31:15+00:00

There's no need for this to be modifiable. Make it const so that it can be put into the .rodata section. Reviewed-by: Daniel Vetter Signed-off-by: Thierry Reding Acked-by: Russell King Signed-off-by: Dave Airlie

drm: add drm_fb_helper_restore_fbdev_mode_unlocked()

2014-06-05T00:02:40+00:00

All drm_fb_helper_restore_fbdev_mode() call sites, save one, do the same locking. Simplify this into drm_fb_helper_restore_fbdev_mode_unlocked(). Signed-off-by: Rob Clark Reviewed-by: Daniel Vetter Signed-off-by: Dave Airlie