lwn.git/drivers/clk/mediatek/clk-pll.c, branch header-removal

clk: mediatek: Add configurable enable control to mtk_pll_data

2021-07-27T17:53:06+00:00

In all MediaTek PLL design, bit0 of CON0 register is always the enable bit. However, there's a special case of usbpll on MT8192. The enable bit of usbpll is moved to bit2 of other register. Add configurable en_reg and pll_en_bit for enable control or default 0 where pll data are static variables. Hence, CON0_BASE_EN could also be removed. And there might have another special case on other chips, the enable bit is still on CON0 register but not at bit0. Reviewed-by: Ikjoon Jang Signed-off-by: Weiyi Lu Signed-off-by: Chun-Jie Chen Link: https://lore.kernel.org/r/20210726105719.15793-8-chun-jie.chen@mediatek.com Signed-off-by: Stephen Boyd

clk: mediatek: Fix asymmetrical PLL enable and disable control

2021-07-27T17:53:06+00:00

In fact, the en_mask is a combination of divider enable mask and pll enable bit(bit0). Before this patch, we enabled both divider mask and bit0 in prepare(), but only cleared the bit0 in unprepare(). In the future, we hope en_mask will only be used as divider enable mask. The enable register(CON0) will be set in 2 steps: first is divider mask, and then bit0 during prepare(), and vice versa. But considering backward compatibility, at this stage we allow en_mask to be a combination or a pure divider enable mask. And then we will make en_mask a pure divider enable mask in another following patch series. Reviewed-by: Ikjoon Jang Signed-off-by: Weiyi Lu Signed-off-by: Chun-Jie Chen Link: https://lore.kernel.org/r/20210726105719.15793-7-chun-jie.chen@mediatek.com Signed-off-by: Stephen Boyd

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174

2019-05-30T18:26:41+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Kate Stewart Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman

clk: mediatek: Allow changing PLL rate when it is off

2019-04-11T20:29:19+00:00

Some modules may need to change its clock rate before turn on it. So changing PLL's rate when it is off should be allowed. This patch removes PLL enabled check before set rate, so that PLLs can set new frequency even if they are off. On MT8173 for example, ARMPLL's enable bit can be controlled by other HW. That means ARMPLL may be turned on even if we (CPU / SW) set ARMPLL's enable bit as 0. In this case, SW may want and can still change ARMPLL's rate by changing its pcw and postdiv settings. But without this patch, new pcw setting will not be applied because its enable bit is 0. Signed-off-by: James Liao Acked-by: Michael Turquette Signed-off-by: Weiyi Lu Reviewed-by: James Liao Signed-off-by: Stephen Boyd

clk: mediatek: Add configurable pcw_chg_reg to mtk_pll_data

2019-04-11T20:20:16+00:00

In previous MediaTek PLL design, it assumes the pcw change control is always on the CON1 register. However, the pcw change bit on MT8183 was moved onto CON0 because the the PCW length of audio PLLs are extended to 32-bit. Add configurable pcw_chg_reg to set the pcw change control register address or using the default control register CON1 if without setting in pll data. Signed-off-by: Weiyi Lu Reviewed-by: James Liao Reviewed-by: Nicolas Boichat Tested-by: Nicolas Boichat Signed-off-by: Stephen Boyd

clk: mediatek: Add configurable pcwibits and fmin to mtk_pll_data

2019-04-11T20:13:08+00:00

1. pcwibits: The integer bits of pcw for PLLs is extend to 8 bits, add a variable to indicate this change and backward-compatible. 2. fmin: The PLL frequency lower-bound is vary from 1GHz to 1.5GHz, add a variable to indicate platform-dependent. Signed-off-by: Owen Chen Signed-off-by: Weiyi Lu Acked-by: Sean Wang Reviewed-by: James Liao Reviewed-by: Nicolas Boichat Tested-by: Nicolas Boichat Signed-off-by: Stephen Boyd

clk: mediatek: Disable tuner_en before change PLL rate

2019-04-11T20:09:17+00:00

PLLs with tuner_en bit, such as APLL1, need to disable tuner_en before apply new frequency settings, or the new frequency settings (pcw) will not be applied. The tuner_en bit will be disabled during changing PLL rate and be restored after new settings applied. Fixes: e2f744a82d725 (clk: mediatek: Add MT2712 clock support) Cc: Signed-off-by: Owen Chen Signed-off-by: Weiyi Lu Reviewed-by: James Liao Reviewed-by: Matthias Brugger Signed-off-by: Stephen Boyd

clk: mediatek: add the option for determining PLL source clock

2017-11-02T08:07:51+00:00

Since the previous setup always sets the PLL using crystal 26MHz, this doesn't always happen in every MediaTek platform. So the patch added flexibility for assigning extra member for determining the PLL source clock. Signed-off-by: Chen Zhong Signed-off-by: Sean Wang Signed-off-by: Stephen Boyd

clk: mediatek: Add MT2712 clock support

2017-11-02T08:02:53+00:00

Add MT2712 clock support, include topckgen, apmixedsys, infracfg, pericfg, mcucfg and subsystem clocks. Signed-off-by: Weiyi Lu [sboyd@codeaurora.org: Static on top_clk_data] Signed-off-by: Stephen Boyd

clk: mediatek: Add MT2701 clock support

2016-11-08T23:59:49+00:00

Add MT2701 clock support, include topckgen, apmixedsys, infracfg, pericfg and subsystem clocks. Signed-off-by: Shunli Wang Signed-off-by: James Liao Signed-off-by: Erin Lo Tested-by: John Crispin Signed-off-by: Stephen Boyd