lwn.git/drivers/acpi, branch v4.1.12

ACPI, PCI: Penalize legacy IRQ used by ACPI SCI

2015-09-21T17:05:44+00:00

commit 5d0ddfebb93069061880fc57ee4ba7246bd1e1ee upstream. Nick Meier reported a regression with HyperV that " After rebooting the VM, the following messages are logged in syslog when trying to load the tulip driver: tulip: Linux Tulip drivers version 1.1.15 (Feb 27, 2007) tulip: 0000:00:0a.0: PCI INT A: failed to register GSI tulip: Cannot enable tulip board #0, aborting tulip: probe of 0000:00:0a.0 failed with error -16 Errors occur in 3.19.0 kernel Works in 3.17 kernel. " According to the ACPI dump file posted by Nick at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1440072 The ACPI MADT table includes an interrupt source overridden entry for ACPI SCI: [236h 0566 1] Subtable Type : 02 [237h 0567 1] Length : 0A [238h 0568 1] Bus : 00 [239h 0569 1] Source : 09 [23Ah 0570 4] Interrupt : 00000009 [23Eh 0574 2] Flags (decoded below) : 000D Polarity : 1 Trigger Mode : 3 And in DSDT table, we have _PRT method to define PCI interrupts, which eventually goes to: Name (PRSA, ResourceTemplate () { IRQ (Level, ActiveLow, Shared, ) {3,4,5,7,9,10,11,12,14,15} }) Name (PRSB, ResourceTemplate () { IRQ (Level, ActiveLow, Shared, ) {3,4,5,7,9,10,11,12,14,15} }) Name (PRSC, ResourceTemplate () { IRQ (Level, ActiveLow, Shared, ) {3,4,5,7,9,10,11,12,14,15} }) Name (PRSD, ResourceTemplate () { IRQ (Level, ActiveLow, Shared, ) {3,4,5,7,9,10,11,12,14,15} }) According to the MADT and DSDT tables, IRQ 9 may be used for: 1) ACPI SCI in level, high mode 2) PCI legacy IRQ in level, low mode So there's a conflict in polarity setting for IRQ 9. Prior to commit cd68f6bd53cf ("x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI"), ACPI SCI is handled specially and there's no check for conflicts between ACPI SCI and PCI legagy IRQ. And it seems that the HyperV hypervisor doesn't make use of the polarity configuration in IOAPIC entry, so it just works. Commit cd68f6bd53cf gets rid of the specially handling of ACPI SCI, and then the pin attribute checking code discloses the conflicts between ACPI SCI and PCI legacy IRQ on HyperV virtual machine, and rejects the request to assign IRQ9 to PCI devices. So penalize legacy IRQ used by ACPI SCI and mark it unusable if ACPI SCI attributes conflict with PCI IRQ attributes. Please refer to following links for more information: https://bugzilla.kernel.org/show_bug.cgi?id=101301 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1440072 Fixes: cd68f6bd53cf ("x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI") Reported-and-tested-by: Nick Meier Acked-by: Thomas Gleixner Signed-off-by: Jiang Liu Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

serial: 8250: bind to ALi Fast Infrared Controller (ALI5123)

2015-09-21T17:05:39+00:00

commit 1d7002777a8fe8188caaa98d4a8eb4ed298fcdae upstream. This way this device can be used with irtty-sir - at least on Toshiba Satellite A20-S103 it is not configured by default and needs PNP activation before it starts to respond on I/O ports. This device has actually its own driver (ali-ircc), but this driver seems to be non-functional for a very long time (see http://permalink.gmane.org/gmane.linux.irda.general/484 http://permalink.gmane.org/gmane.network.protocols.obex.openobex.user/943 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=535070 ). Signed-off-by: Maciej Szmigiero Signed-off-by: Greg Kroah-Hartman

ACPI / PCI: Fix regressions caused by resource_size_t overflow with 32-bit kernel

2015-08-03T16:29:14+00:00

commit 1fb01ca93a1348a1469b8777326cd7632483de77 upstream. Zoltan Boszormenyi reported this regression: "There's a Realtek RTL8111/8168/8411 (PCI ID 10ec:8168, Subsystem ID 1565:230e) network chip on the mainboard. After the r8169 driver loaded the IRQs in the machine went berserk. Keyboard keypressed arrived with considerable latency and duplicated, so no real work was possible. The machine responded to the power button but didn't actually power down. It just stuck at the powering down message. I had to press the power button for 4 seconds to power it down. The computer is a POS machine with a big battery inside. Because of this, either ACPI or the Realtek chip kept the bad state and after rebooting, the network chip didn't even show up in lspci. Not even the PXE ROM announced itself during boot. I had to disconnect the battery to beat some sense back to the computer. The regression happens with 4.0.5, 4.1.0-rc8 and 4.1.0-final. 3.18.16 was good." The regression is caused by commit 593669c2ac0f (x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation). Since commit 593669c2ac0f, x86 PCI ACPI host bridge driver validates ACPI resources by first converting an ACPI resource to a 'struct resource' structure and then applying checks against the converted resource structure. The 'start' and 'end' fields in 'struct resource' are defined to be type of resource_size_t, which may be 32 bits or 64 bits depending on CONFIG_PHYS_ADDR_T_64BIT. This may cause incorrect resource validation results with 32-bit kernels because 64-bit ACPI resource descriptors may get truncated when converting to 32-bit 'start' and 'end' fields in 'struct resource'. It eventually affects PCI resource allocation subsystem and makes some PCI devices and the system behave abnormally due to incorrect resource assignment. So enhance the ACPI resource parsing interfaces to ignore ACPI resource descriptors with address/offset above 4G when running in 32-bit mode. With the fix applied, the behavior of the machine was restored to how 3.18.16 worked, i.e. the memory range that is over 4GB is ignored again, and lspci -vvxxx shows that everything is at the same memory window as they were with 3.18.16. Reported-and-tested-by: Boszormenyi Zoltan Fixes: 593669c2ac0f (x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation) Signed-off-by: Jiang Liu Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPICA: Tables: Fix an issue that FACS initialization is performed twice

2015-08-03T16:29:14+00:00

commit c04be18448355441a0c424362df65b6422e27bda upstream. ACPICA commit 90f5332a15e9d9ba83831ca700b2b9f708274658 This patch adds a new FACS initialization flag for acpi_tb_initialize(). acpi_enable_subsystem() might be invoked several times in OS bootup process, and we don't want FACS initialization to be invoked twice. Lv Zheng. Link: https://github.com/acpica/acpica/commit/90f5332a Signed-off-by: Lv Zheng Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPICA: Tables: Enable both 32-bit and 64-bit FACS

2015-08-03T16:29:14+00:00

commit c04e1fb4396d27f18296db0f914760fa7fe8223a upstream. ACPICA commit f7b86f35416e3d1f71c3d816ff5075ddd33ed486 The following commit is reported to have broken s2ram on some platforms: Commit: 0249ed2444d65d65fc3f3f64f398f1ad0b7e54cd ACPICA: Add option to favor 32-bit FADT addresses. The platform reports 2 FACS tables (which is not allowed by ACPI specification) and the new 32-bit address favor rule forces OSPMs to use the FACS table reported via FADT's X_FIRMWARE_CTRL field. The root cause of the reported bug might be one of the followings: 1. BIOS may favor the 64-bit firmware waking vector address when the version of the FACS is greater than 0 and Linux currently only supports resuming from the real mode, so the 64-bit firmware waking vector has never been set and might be invalid to BIOS while the commit enables higher version FACS. 2. BIOS may favor the FACS reported via the "FIRMWARE_CTRL" field in the FADT while the commit doesn't set the firmware waking vector address of the FACS reported by "FIRMWARE_CTRL", it only sets the firware waking vector address of the FACS reported by "X_FIRMWARE_CTRL". This patch excludes the cases that can trigger the bugs caused by the root cause 2. There is no handshaking mechanism can be used by OSPM to tell BIOS which FACS is currently used. Thus the FACS reported by "FIRMWARE_CTRL" may still be used by BIOS and the 0 value of the 32-bit firmware waking vector might trigger such failure. This patch tries to favor 32bit FACS address in another way where both the FACS reported by "FIRMWARE_CTRL" and the FACS reported by "X_FIRMWARE_CTRL" are loaded so that further commit can set firmware waking vector in the both tables to ensure we can exclude the cases that trigger the bugs caused by the root cause 2. The exclusion is split into 2 commits as this commit is also useful for dumping more ACPI tables, it won't get reverted when such exclusion is no longer necessary. Lv Zheng. Link: https://bugzilla.kernel.org/show_bug.cgi?id=74021 Link: https://github.com/acpica/acpica/commit/f7b86f35 Reported-and-tested-by: Oswald Buddenhagen Signed-off-by: Lv Zheng Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / LPSS: Fix up acpi_lpss_create_device()

2015-08-03T16:29:14+00:00

commit d3e13ff3c1aa2403d9a5f371baac088daeb8f56d upstream. Fix a return value (which should be a negative error code) and a memory leak (the list allocated by acpi_dev_get_resources() needs to be freed on ioremap() errors too) in acpi_lpss_create_device() introduced by commit 4483d59e29fe 'ACPI / LPSS: check the result of ioremap()'. Fixes: 4483d59e29fe 'ACPI / LPSS: check the result of ioremap()' Reported-by: Dan Carpenter Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage

2015-08-03T16:29:14+00:00

commit 0294112ee3135fbd15eaa70015af8283642dd970 upstream. This effectively reverts the following three commits: 7bc10388ccdd ACPI / resources: free memory on error in add_region_before() 0f1b414d1907 ACPI / PNP: Avoid conflicting resource reservations b9a5e5e18fbf ACPI / init: Fix the ordering of acpi_reserve_resources() (commit b9a5e5e18fbf introduced regressions some of which, but not all, were addressed by commit 0f1b414d1907 and commit 7bc10388ccdd was a fixup on top of the latter) and causes ACPI fixed hardware resources to be reserved at the fs_initcall_sync stage of system initialization. The story is as follows. First, a boot regression was reported due to an apparent resource reservation ordering change after a commit that shouldn't lead to such changes. Investigation led to the conclusion that the problem happened because acpi_reserve_resources() was executed at the device_initcall() stage of system initialization which wasn't strictly ordered with respect to driver initialization (and with respect to the initialization of the pcieport driver in particular), so a random change causing the device initcalls to be run in a different order might break things. The response to that was to attempt to run acpi_reserve_resources() as soon as we knew that ACPI would be in use (commit b9a5e5e18fbf). However, that turned out to be too early, because it caused resource reservations made by the PNP system driver to fail on at least one system and that failure was addressed by commit 0f1b414d1907. That fix still turned out to be insufficient, though, because calling acpi_reserve_resources() before the fs_initcall stage of system initialization caused a boot regression to happen on the eCAFE EC-800-H20G/S netbook. That meant that we only could call acpi_reserve_resources() at the fs_initcall initialization stage or later, but then we might just as well call it after the PNP initalization in which case commit 0f1b414d1907 wouldn't be necessary any more. For this reason, the changes made by commit 0f1b414d1907 are reverted (along with a memory leak fixup on top of that commit), the changes made by commit b9a5e5e18fbf that went too far are reverted too and acpi_reserve_resources() is changed into fs_initcall_sync, which will cause it to be executed after the PNP subsystem initialization (which is an fs_initcall) and before device initcalls (including the pcieport driver initialization) which should avoid the initial issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=100581 Link: http://marc.info/?t=143092384600002&r=1&w=2 Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831 Link: http://marc.info/?t=143389402600001&r=1&w=2 Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()" Reported-by: Roland Dreier Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / resources: free memory on error in add_region_before()

2015-08-03T16:29:14+00:00

commit 7bc10388ccdd79b3d20463151a1f8e7a590a775b upstream. There is a small memory leak on error. Fixes: 0f1b414d1907 (ACPI / PNP: Avoid conflicting resource reservations) Signed-off-by: Dan Carpenter Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / PNP: Avoid conflicting resource reservations

2015-07-21T17:10:02+00:00

commit 0f1b414d190724617eb1cdd615592fa8cd9d0b50 upstream. Commit b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()" overlooked the fact that the memory and/or I/O regions reserved by acpi_reserve_resources() may conflict with those reserved by the PNP "system" driver. If that conflict actually takes place, it causes the reservations made by the "system" driver to fail while before commit b9a5e5e18fbf all reservations made by it and by acpi_reserve_resources() would be successful. In turn, that allows the resources that haven't been reserved by the "system" driver to be used by others (e.g. PCI) which sometimes leads to functional problems (up to and including boot failures). To fix that issue, introduce a common resource reservation routine, acpi_reserve_region(), to be used by both acpi_reserve_resources() and the "system" driver, that will track all resources reserved by it and avoid making conflicting requests. Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831 Link: http://marc.info/?t=143389402600001&r=1&w=2 Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()" Reported-by: Roland Dreier Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / PM: Add missing pm_generic_complete() invocation

2015-07-21T17:10:02+00:00

commit 3d56402d3fa8d10749eeb36293dd1992bd5ad0c3 upstream. Add missing invocation of pm_generic_complete() to acpi_subsys_complete() to allow ->complete callbacks provided by the drivers of devices using the ACPI PM domain to be executed during system resume. Fixes: f25c0ae2b4c4 (ACPI / PM: Avoid resuming devices in ACPI PM domain during system suspend) Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman