lwn.git/arch/powerpc/kernel/irq.c, branch docs-mw

powerpc/irq: use seq_put_decimal_ull_width() for decimal values

2024-11-10T11:33:52+00:00

On a system with n CPUs and m interrupts, there will be n*m decimal values yielded via seq_printf(.."%10u "..) which is less efficient than seq_put_decimal_ull_width(), stress reading /proc/interrupts indicates ~30% performance improvement with this patch. Signed-off-by: David Wang <00107082@163.com> [mpe: Flesh out change log based on original submission] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/all/20241103080552.4787-1-00107082@163.com Link: https://patch.msgid.link/20241108162327.9887-1-00107082@163.com

powerpc/4xx: Remove CONFIG_BOOKE_OR_40x

2024-06-28T12:28:48+00:00

Now that 40x is gone, replace CONFIG_BOOKE_OR_40x by CONFIG_BOOKE. Signed-off-by: Michael Ellerman Link: https://msgid.link/20240628121201.130802-5-mpe@ellerman.id.au

powerpc/irq: Allow softirq to hardirq stack transition

2024-03-03T11:20:29+00:00

Allow a transition from the softirq stack to the hardirq stack when handling a hardirq. Doing so means a hardirq received while deep in softirq processing is less likely to cause a stack overflow of the softirq stack. Previously it wasn't safe to do so because irq_exit() (which initiates softirq processing) was called on the hardirq stack. That was changed in commit 1b1b6a6f4cc0 ("powerpc: handle irq_enter/ irq_exit in interrupt handler wrappers") and 1346d00e1bdf ("powerpc: Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK"). The allowed transitions are now: - process stack -> hardirq stack - process stack -> softirq stack - process stack -> softirq stack -> hardirq stack Reviewed-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://msgid.link/20231130125045.3080961-1-mpe@ellerman.id.au

powerpc/64: vmlinux support building with PCREL addresing

2023-04-20T02:59:21+00:00

PC-Relative or PCREL addressing is an extension to the ELF ABI which uses Power ISA v3.1 PC-relative instructions to calculate addresses, rather than the traditional TOC scheme. Add an option to build vmlinux using pcrel addressing. Modules continue to use TOC addressing. - TOC address helpers and r2 are poisoned with -1 when running vmlinux. r2 could be used for something useful once things are ironed out. - Assembly must call C functions with @notoc annotation, or the linker complains aobut a missing nop after the call. This is done with the CFUNC macro introduced earlier. - Boot: with the exception of prom_init, the execution branches to the kernel virtual address early in boot, before any addresses are generated, which ensures 34-bit pcrel addressing does not miss the high PAGE_OFFSET bits. TOC relative addressing has a similar requirement. prom_init does not go to the virtual address and its addresses should not carry over to the post-prom kernel. - Ftrace trampolines are converted from TOC addressing to pcrel addressing, including module ftrace trampolines that currently use the kernel TOC to find ftrace target functions. - BPF function prologue and function calling generation are converted from TOC to pcrel. - copypage_64.S has an interesting problem, prefixed instructions have alignment restrictions so the linker can add padding, which makes the assembler treat the difference between two local labels as non-constant even if alignment is arranged so padding is not required. This may need toolchain help to solve nicely, for now move the prefix instruction out of the alternate patch section to work around it. This reduces kernel text size by about 6%. Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://msgid.link/20230408021752.862660-6-npiggin@gmail.com

powerpc/64: Fix perf profiling asynchronous interrupt handlers

2023-01-30T09:07:42+00:00

Interrupt entry sets the soft mask to IRQS_ALL_DISABLED to match the hard irq disabled state. So when should_hard_irq_enable() returns true because we want PMI interrupts in irq handlers, MSR[EE] is enabled but PMIs just get soft-masked. Fix this by clearing IRQS_PMI_DISABLED before enabling MSR[EE]. This also tidies some of the warnings, no need to duplicate them in both should_hard_irq_enable() and do_hard_irq_enable(). Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20230121100156.2824054-1-npiggin@gmail.com

powerpc: allow minimum sized kernel stack frames

2022-12-02T06:54:09+00:00

This affects only 64-bit ELFv2 kernels, and reduces the minimum asm-created stack frame size from 112 to 32 byte on those kernels. Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20221127124942.1665522-16-npiggin@gmail.com

asm-generic: Conditionally enable do_softirq_own_stack() via Kconfig.

2022-09-05T15:20:55+00:00

Remove the CONFIG_PREEMPT_RT symbol from the ifdef around do_softirq_own_stack() and move it to Kconfig instead. Enable softirq stacks based on SOFTIRQ_ON_OWN_STACK which depends on HAVE_SOFTIRQ_ON_OWN_STACK and its default value is set to !PREEMPT_RT. This ensures that softirq stacks are not used on PREEMPT_RT and avoids a 'select' statement on an option which has a 'depends' statement. Link: https://lore.kernel.org/YvN5E%2FPrHfUhggr7@linutronix.de Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Arnd Bergmann

Merge tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2022-08-06T23:38:17+00:00

Pull powerpc updates from Michael Ellerman: - Add support for syscall stack randomization - Add support for atomic operations to the 32 & 64-bit BPF JIT - Full support for KASAN on 64-bit Book3E - Add a watchdog driver for the new PowerVM hypervisor watchdog - Add a number of new selftests for the Power10 PMU support - Add a driver for the PowerVM Platform KeyStore - Increase the NMI watchdog timeout during live partition migration, to avoid timeouts due to increased memory access latency - Add support for using the 'linux,pci-domain' device tree property for PCI domain assignment - Many other small features and fixes Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A. Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada, Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár, Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu Jianfeng, and Zhouyi Zhou. * tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits) powerpc/64e: Fix kexec build error EDAC/ppc_4xx: Include required of_irq header directly powerpc/pci: Fix PHB numbering when using opal-phbid powerpc/64: Init jump labels before parse_early_param() selftests/powerpc: Avoid GCC 12 uninitialised variable warning powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address powerpc/xive: Fix refcount leak in xive_get_max_prio powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader powerpc/perf: Include caps feature for power10 DD1 version powerpc: add support for syscall stack randomization powerpc: Move system_call_exception() to syscall.c powerpc/powernv: rename remaining rng powernv_ functions to pnv_ powerpc/powernv/kvm: Use darn for H_RANDOM on Power9 powerpc/powernv: Avoid crashing if rng is NULL selftests/powerpc: Fix matrix multiply assist test powerpc/signal: Update comment for clarity powerpc: make facility_unavailable_exception 64s powerpc/platforms/83xx/suspend: Remove write-only global variable powerpc/platforms/83xx/suspend: Prevent unloading the driver powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration ...

powerpc/irq: Simplify __do_irq()

2022-06-29T06:58:31+00:00

Remove duplicated code by implementing a proper if/else. Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/5a3b21311191f1240850db6ab29b19ac7885fe03.1654769775.git.christophe.leroy@csgroup.eu

powerpc/irq: Perform stack_overflow detection after switching to IRQ stack

2022-06-29T06:58:31+00:00

When KASAN is enabled, as shown by the Oops below, the 2k limit is not enough to allow stack dump after a stack overflow detection when CONFIG_DEBUG_STACKOVERFLOW is selected: do_IRQ: stack overflow: 1984 CPU: 0 PID: 126 Comm: systemd-udevd Not tainted 5.18.0-gentoo-PMacG4 #1 Call Trace: Oops: Kernel stack overflow, sig: 11 [#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac Modules linked in: sr_mod cdrom radeon(+) ohci_pci(+) hwmon i2c_algo_bit drm_ttm_helper ttm drm_dp_helper snd_aoa_i2sbus snd_aoa_soundbus snd_pcm ehci_pci snd_timer ohci_hcd snd ssb ehci_hcd 8250_pci soundcore drm_kms_helper pcmcia 8250 pcmcia_core syscopyarea usbcore sysfillrect 8250_base sysimgblt serial_mctrl_gpio fb_sys_fops usb_common pkcs8_key_parser fuse drm drm_panel_orientation_quirks configfs CPU: 0 PID: 126 Comm: systemd-udevd Not tainted 5.18.0-gentoo-PMacG4 #1 NIP: c02e5558 LR: c07eb3bc CTR: c07f46a8 REGS: e7fe9f50 TRAP: 0000 Not tainted (5.18.0-gentoo-PMacG4) MSR: 00001032 CR: 44a14824 XER: 20000000 GPR00: c07eb3bc eaa1c000 c26baea0 eaa1c0a0 00000008 00000000 c07eb3bc eaa1c010 GPR08: eaa1c0a8 04f3f3f3 f1f1f1f1 c07f4c84 44a14824 0080f7e4 00000005 00000010 GPR16: 00000025 eaa1c154 eaa1c158 c0dbad64 00000020 fd543810 eaa1c0a0 eaa1c29e GPR24: c0dbad44 c0db8740 05ffffff fd543802 eaa1c150 c0c9a3c0 eaa1c0a0 c0c9a3c0 NIP [c02e5558] kasan_check_range+0xc/0x2b4 LR [c07eb3bc] format_decode+0x80/0x604 Call Trace: [eaa1c000] [c07eb3bc] format_decode+0x80/0x604 (unreliable) [eaa1c070] [c07f4dac] vsnprintf+0x128/0x938 [eaa1c110] [c07f5788] sprintf+0xa0/0xc0 [eaa1c180] [c0154c1c] __sprint_symbol.constprop.0+0x170/0x198 [eaa1c230] [c07ee71c] symbol_string+0xf8/0x260 [eaa1c430] [c07f46d0] pointer+0x15c/0x710 [eaa1c4b0] [c07f4fbc] vsnprintf+0x338/0x938 [eaa1c550] [c00e8fa0] vprintk_store+0x2a8/0x678 [eaa1c690] [c00e94e4] vprintk_emit+0x174/0x378 [eaa1c6d0] [c00ea008] _printk+0x9c/0xc0 [eaa1c750] [c000ca94] show_stack+0x21c/0x260 [eaa1c7a0] [c07d0bd4] dump_stack_lvl+0x60/0x90 [eaa1c7c0] [c0009234] __do_IRQ+0x170/0x174 [eaa1c800] [c0009258] do_IRQ+0x20/0x34 [eaa1c820] [c00045b4] HardwareInterrupt_virt+0x108/0x10c ... As the detection is asynchronously performed at IRQs, we could be long after the limit has been crossed, so increasing the limit would not solve the problem completely. In order to be sure that there is enough stack space for the stack dump, do it after the switch to the IRQ stack. That way it is sure that the stack is large enough, unless the IRQ stack has been overfilled in which case the end of life is close. Reported-by: Erhard Furtner Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/c215d714329f475b431a6193369035aadfc0d182.1654769775.git.christophe.leroy@csgroup.eu