lwn.git/arch/mips/mm/dma-default.c, branch v3.2-rc3

MIPS: HIGHMEM DMA on noncoherent MIPS32 processors

2011-07-25T16:26:52+00:00

[v4: Patch applies to linux-queue.git with kmap_atomic patches: https://patchwork.kernel.org/patch/189932/ https://patchwork.kernel.org/patch/194552/ https://patchwork.kernel.org/patch/189912/ ] The MIPS DMA coherency functions do not work properly (i.e. kernel oops) when HIGHMEM pages are passed in as arguments. Use kmap_atomic() to temporarily map high pages for cache maintenance operations. Tested on a 2.6.36-rc7 1GB HIGHMEM SMP no-alias system. Signed-off-by: Dezhong Diao Signed-off-by: Kevin Cernekee Cc: Dezhong Diao Cc: David Daney Cc: David VomLehn Cc: Sergei Shtylyov Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1695/ Signed-off-by: Ralf Baechle

MIPS: Rename mips_dma_cache_sync back to dma_cache_sync

2010-12-16T18:11:01+00:00

This fixes IP22 and IP28 build errors. Signed-off-by: Ralf Baechle

MIPS: Convert DMA to use dma-mapping-common.h

2010-10-29T18:08:31+00:00

Use asm-generic/dma-mapping-common.h to handle all DMA mapping operations and establish a default get_dma_ops() that forwards all operations to the existing code. Augment dev_archdata to carry a pointer to the struct dma_map_ops, allowing DMA operations to be overridden on a per device basis. Currently this is never filled in, so the default dma_map_ops are used. A follow-on patch sets this for Octeon PCI devices. Also initialize the dma_debug system as it is now used if it is configured. Includes fixes by Kevin Cernekee . Signed-off-by: David Daney Patchwork: http://patchwork.linux-mips.org/patch/1637/ Patchwork: http://patchwork.linux-mips.org/patch/1678/ Signed-off-by: Ralf Baechle

MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask.

2010-10-04T17:33:56+00:00

This only matters for ISA devices with a 24-bit DMA limit or for devices with a 32-bit DMA limit on systems with ZONE_DMA32 enabled. The latter currently only affects 32-bit PCI cards on Sibyte-based systems with more than 1GB RAM installed. Signed-off-by: Ralf Baechle

dma-mapping: remove dma_is_consistent API

2010-08-11T15:59:21+00:00

Architectures implement dma_is_consistent() in different ways (some misinterpret the definition of API in DMA-API.txt). So it hasn't been so useful for drivers. We have only one user of the API in tree. Unlikely out-of-tree drivers use the API. Even if we fix dma_is_consistent() in some architectures, it doesn't look useful at all. It was invented long ago for some old systems that can't allocate coherent memory at all. It's better to export only APIs that are definitely necessary for drivers. Let's remove this API. Signed-off-by: FUJITA Tomonori Cc: James Bottomley Reviewed-by: Konrad Rzeszutek Wilk Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

MIPS: Add DMA declare coherent memory support

2009-11-13T17:10:37+00:00

The ohci-sm501 driver requires dma_declare_coherent_memory(). It is used by the driver's local memory allocation with dma_alloc_coherent(). Tested on TANBAC TB0287(VR4131 + SM501). [Ralf: Fixed reject in dma-default.c and removed the entire #if 0'ed block in dma-mapping.h instead of just the #if 0.] Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle

MIPS: Pass struct device to plat_dma_addr_to_phys()

2009-06-17T10:06:24+00:00

Signed-off-by: Kevin Cernekee Signed-off-by: Ralf Baechle

MIPS: Add size and direction arguments to plat_unmap_dma_mem()

2009-06-17T10:06:24+00:00

Signed-off-by: Kevin Cernekee Signed-off-by: Ralf Baechle

MIPS: Synchronize dma_map_page and dma_map_single

2009-05-14T12:50:26+00:00

Synchronize dma_map_page/dma_unmap_page and dma_map_single/dma_unmap_single. This will reduce unnecessary writebacks and invalidates. [Ralf: make dma_unmap_page an inline function.] Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle