Linux kernel documentation tree maintained by Jonathan Corbet http://mirrors.hust.edu.cn/git/lwn.git/atom?h=v3.14.48 2011-07-25T01:20:40+00:00 2011-07-25T01:20:40+00:00 Greg Ungerer gerg@uclinux.org 2011-05-05T12:32:12+00:00 urn:sha1:f941f5caa0e947f4ed060a751ca4a3bf552af625 The non-MMU m68k targets can use the same asm/system.h as the MMU targets. So switch the current system_mm.h to be system.h and remove system_no.h. The assembly support code for the non-MMU resume functions needs to be modified to match the now common switch_to() macro. Specifically this means correctly saving and restoring the status flags in the case of the ColdFire resume, and some reordering of the code to not use registers before they are saved or after they are restored. Signed-off-by: Greg Ungerer <gerg@uclinux.org> 2010-10-23T00:33:35+00:00 Linus Torvalds torvalds@linux-foundation.org 2010-10-23T00:33:35+00:00 urn:sha1:80c226fbef56576946c9655fcb2ab62e63404d12 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Add missing I/O macros {in,out}{w,l}_p() for !CONFIG_ISA m68k: Remove big kernel lock in cache flush code m68k: __pa(): cast arg to long fbdev: atafb - Remove undead ifdef ATAFB_FALCON zorro: Fix device_register() error handling fbdev/m68k: Fix section mismatches in q40fb.c m68k/m68knommu: merge the MMU and non-MMU traps.h m68k/m68knommu: merge MMU and non-MMU thread_info.h m68k/m68knommu: merge MMU and non-MMU atomic.h m68k/m68knommu: clean up page.h m68k/m68knommu: merge machdep.h files into a single file m68k/m68knommu: merge MMU and non-MMU string.h m68k/m68knommu: Remove dead SMP config option m68k: move definition of THREAD_SIZE into thread_info_mm.h m68k: Use asm-generic/ioctls.h (enables termiox) m68k: Remove dead GG2 config option 2010-10-22T07:43:23+00:00 Christian Dietrich qy03fugy@stud.informatik.uni-erlangen.de 2010-08-04T12:41:45+00:00 urn:sha1:5bc5a70b62e5b672e40dd031da3e0444f62dbd3a CONFIG_SMP doesn't exist in Kconfig (for this architecure), therefore remove all references to it from the source. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> 2010-10-07T13:08:55+00:00 David Howells dhowells@redhat.com 2010-10-07T13:08:55+00:00 urn:sha1:df9ee29270c11dba7d0fe0b83ce47a4d8e8d2101 Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com 2009-06-11T03:09:11+00:00 Greg Ungerer gerg@uclinux.org 2009-05-01T06:09:17+00:00 urn:sha1:fb29ad7949aeed3d464ba8d2c9772835f456d4c4 All ColdFire and non-MMU 68k code has custom reset routines. Remove the obsolete and now un-used reset macros. Signed-off-by: Greg Ungerer <gerg@uclinux.org> 2009-06-11T03:09:09+00:00 Greg Ungerer gerg@uclinux.org 2009-04-28T06:56:03+00:00 urn:sha1:293ca0f75415dd8373c716bf9755569daca7ba5d The sofwtare reset control code for the 523x ColdFire family uses the same Reset unit hardware as the 527x and 528x ColdFire parts. So they should all use the same code. Merge them. Signed-off-by: Greg Ungerer <gerg@uclinux.org> 2009-06-11T03:09:08+00:00 Greg Ungerer gerg@uclinux.org 2009-04-28T04:13:21+00:00 urn:sha1:7f72b47cedd1efc301576ff1050ec0a26c57eb48 The sofwtare reset control for the 527x ColdFire family is based on the same Reset Control Unit as the 528x ColdFire family. So use the same reset code for both. Signed-off-by: Greg Ungerer <gerg@uclinux.org> 2009-01-27T06:42:02+00:00 Adrian Bunk bunk@kernel.org 2009-01-13T04:20:01+00:00 urn:sha1:3947fca786dcd8ee6255a8bed7963357b3d984f6 Greg Ungerer said about this board: Only ever a handful where made, and that was in 1999. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org> 2009-01-16T11:58:10+00:00 Sam Ravnborg sam@ravnborg.org 2009-01-16T11:58:10+00:00 urn:sha1:49148020bcb6910ce71417bd990a5ce7017f9bd3 Merge header files for m68k and m68knommu to the single location: arch/m68k/include/asm The majority of this patch was the result of the script that is included in the changelog below. The script was originally written by Arnd Bergman and exten by me to cover a few more files. When the header files differed the script uses the following: The original m68k file is named <file>_mm.h [mm for memory manager] The m68knommu file is named <file>_no.h [no for no memory manager] The files uses the following include guard: This include gaurd works as the m68knommu toolchain set the __uClinux__ symbol - so this should work in userspace too. Merging the header files for m68k and m68knommu exposes the (unexpected?) ABI differences thus it is easier to actually identify these and thus to fix them. The commit has been build tested with both a m68k and a m68knommu toolchain - with success. The commit has also been tested with "make headers_check" and this patch fixes make headers_check for m68knommu. The script used: TARGET=arch/m68k/include/asm SOURCE=arch/m68knommu/include/asm INCLUDE="cachectl.h errno.h fcntl.h hwtest.h ioctls.h ipcbuf.h \ linkage.h math-emu.h md.h mman.h movs.h msgbuf.h openprom.h \ oplib.h poll.h posix_types.h resource.h rtc.h sembuf.h shmbuf.h \ shm.h shmparam.h socket.h sockios.h spinlock.h statfs.h stat.h \ termbits.h termios.h tlb.h types.h user.h" EQUAL="auxvec.h cputime.h device.h emergency-restart.h futex.h \ ioctl.h irq_regs.h kdebug.h local.h mutex.h percpu.h \ sections.h topology.h" NOMUUFILES="anchor.h bootstd.h coldfire.h commproc.h dbg.h \ elia.h flat.h m5206sim.h m520xsim.h m523xsim.h m5249sim.h \ m5272sim.h m527xsim.h m528xsim.h m5307sim.h m532xsim.h \ m5407sim.h m68360_enet.h m68360.h m68360_pram.h m68360_quicc.h \ m68360_regs.h MC68328.h MC68332.h MC68EZ328.h MC68VZ328.h \ mcfcache.h mcfdma.h mcfmbus.h mcfne.h mcfpci.h mcfpit.h \ mcfsim.h mcfsmc.h mcftimer.h mcfuart.h mcfwdebug.h \ nettel.h quicc_simple.h smp.h" FILES="atomic.h bitops.h bootinfo.h bug.h bugs.h byteorder.h cache.h \ cacheflush.h checksum.h current.h delay.h div64.h \ dma-mapping.h dma.h elf.h entry.h fb.h fpu.h hardirq.h hw_irq.h io.h \ irq.h kmap_types.h machdep.h mc146818rtc.h mmu.h mmu_context.h \ module.h page.h page_offset.h param.h pci.h pgalloc.h \ pgtable.h processor.h ptrace.h scatterlist.h segment.h \ setup.h sigcontext.h siginfo.h signal.h string.h system.h swab.h \ thread_info.h timex.h tlbflush.h traps.h uaccess.h ucontext.h \ unaligned.h unistd.h" mergefile() { BASE=${1%.h} git mv ${SOURCE}/$1 ${TARGET}/${BASE}_no.h git mv ${TARGET}/$1 ${TARGET}/${BASE}_mm.h cat << EOF > ${TARGET}/$1 EOF git add ${TARGET}/$1 } set -e mkdir -p ${TARGET} git mv include/asm-m68k/* ${TARGET} rmdir include/asm-m68k git rm ${SOURCE}/Kbuild for F in $INCLUDE $EQUAL; do git rm ${SOURCE}/$F done for F in $NOMUUFILES; do git mv ${SOURCE}/$F ${TARGET}/$F done for F in $FILES ; do mergefile $F done rmdir arch/m68knommu/include/asm rmdir arch/m68knommu/include Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org>