lwn.git/arch/arm/mach-pxa/idp.c, branch docs-5.3

mmc: pxa: Use GPIO descriptor for power

2018-12-17T07:26:24+00:00

After converting the PXA driver to use GPIO descriptors for card detect and write protect it is relatively simple to convert it to also use a descriptor for getting the optional power control GPIO. The polarity inversion flag can also go away from the platform data since this is indicated in the GPIO machine descriptor table. Cc: Daniel Mack Cc: Robert Jarzmik Cc: Bartosz Golaszewski Cc: Andrea Adami Signed-off-by: Linus Walleij Acked-by: Robert Jarzmik Signed-off-by: Ulf Hansson

ARM: pxa: Delete platform data for CD/WP

2018-12-17T07:26:24+00:00

This deletes the platform data passed for card detect and write protect from various PXA machines. Make sure to keep .gpio_card_ro_invert as this is still in use by some machines and needed to set the right flag to the MMC core (will be cleaned up later). Cc: Daniel Mack Cc: Robert Jarzmik Cc: Bartosz Golaszewski Cc: Andrea Adami Signed-off-by: Linus Walleij Acked-by: Robert Jarzmik Signed-off-by: Ulf Hansson

ARM: pxa: include linux/leds.h

2017-01-18T18:21:17+00:00

When the header is not included implicitly, we get a build failure: arch/arm/mach-pxa/idp.c:205:22: error: field 'cdev' has incomplete type struct led_classdev cdev; This adds an explicit #include. Signed-off-by: Arnd Bergmann Signed-off-by: Robert Jarzmik

ARM: pxa: enhance smc91x platform data

2016-10-18T18:14:20+00:00

Instead of having the smc91x driver relying on machine_is_*() calls, provide this data through platform data, ie. idp, mainstone and stargate. This way, the driver doesn't need anymore machine_is_*() calls, which wouldn't work anymore with a device-tree build. Signed-off-by: Robert Jarzmik Signed-off-by: David S. Miller

net: smc91x: fix SMC accesses

2016-08-29T03:44:55+00:00

Commit b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") broke some ARM platforms through several mistakes. Firstly, the access size must correspond to the following rule: (a) at least one of 16-bit or 8-bit access size must be supported (b) 32-bit accesses are optional, and may be enabled in addition to the above. Secondly, it provides no emulation of 16-bit accesses, instead blindly making 16-bit accesses even when the platform specifies that only 8-bit is supported. Reorganise smc91x.h so we can make use of the existing 16-bit access emulation already provided - if 16-bit accesses are supported, use 16-bit accesses directly, otherwise if 8-bit accesses are supported, use the provided 16-bit access emulation. If neither, BUG(). This exactly reflects the driver behaviour prior to the commit being fixed. Since the conversion incorrectly cut down the available access sizes on several platforms, we also need to go through every platform and fix up the overly-restrictive access size: Arnd assumed that if a platform can perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access size needed to be specified - not so, all available access sizes must be specified. This likely fixes some performance regressions in doing this: if a platform does not support 8-bit accesses, 8-bit accesses have been emulated by performing a 16-bit read-modify-write access. Tested on the Intel Assabet/Neponset platform, which supports only 8-bit accesses, which was broken by the original commit. Fixes: b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: Russell King Tested-by: Robert Jarzmik Signed-off-by: David S. Miller

ARM: pxa: make more mach/*.h files local

2015-12-01T20:52:50+00:00

Lots of header files are never included outside of a mach-pxa directory and do not need to be made visible in include/mach, so let's just move them all down one level. Signed-off-by: Arnd Bergmann

ARM: fix typos in smc91x platform data

2015-03-05T04:32:26+00:00

I recently did a rework of the smc91x driver and did some build-testing by compiling hundreds of randconfig kernels. Unfortunately, my script was wrong and did not actually test the configurations that mattered, so I introduced stupid typos in almost every file I touched. I fixed my script now, built all configurations that actually matter and fixed all the typos, this is the result. Signed-off-by: Arnd Bergmann Fixes: b70661c70830d ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: David S. Miller

net: smc91x: use run-time configuration on all ARM machines

2015-02-28T17:56:56+00:00

The smc91x driver traditionally gets configured at compile-time for whichever hardware it runs on. This no longer works on ARM as we continue to move to building all-in-one kernels. Most ARM configurations with this driver already use run-time configuration through DT or through platform_data, but a few have not been converted yet. I've checked all ARM boards that use this driver in their legacy board files, and converted the ones that were using compile-time configuration in smc91x.h to behave like the other ones and provide the interrupt polarity along with the MMIO configuration (width, stride) at platform device creation time. In particular, these combinations were previously selectable in Kconfig but in fact broken: - sa1100 assabet plus pleb - msm combined with any other armv6/v7 platform - pxa-idp combined with any non-DMA pxa variant - LogicPD PXA270 combined with any other pxa - nomadik combined with any other armv4/v5 platform, e.g. versatile. None of these seem critical enough to warrant a backport to stable, but it would be nice to clean this up for good. Signed-off-by: Arnd Bergmann ---- I would like the patch to get merged through netdev, after Robert and/or Linus have verified it on at least some hardware. There are a few other non-ARM platforms using this driver, I could do the same patch for those if we want to take it further. arch/arm/mach-msm/board-halibut.c | 8 ++++- arch/arm/mach-msm/board-qsd8x50.c | 8 ++++- arch/arm/mach-pxa/idp.c | 5 +++ arch/arm/mach-pxa/lpd270.c | 8 ++++- arch/arm/mach-realview/core.c | 7 ++++ arch/arm/mach-realview/realview_eb.c | 2 +- arch/arm/mach-sa1100/neponset.c | 6 ++++ arch/arm/mach-sa1100/pleb.c | 7 ++++ drivers/net/ethernet/smsc/smc91x.c | 9 +++-- drivers/net/ethernet/smsc/smc91x.h | 114 ++---------------------------------------------------------- 10 files changed, 57 insertions(+), 117 deletions(-) Tested-by: Robert Jarzmik Signed-off-by: David S. Miller

ARM: delete struct sys_timer

2012-12-24T16:36:38+00:00

Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik Signed-off-by: Stephen Warren

Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2012-10-02T02:11:38+00:00

Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...