lwn.git/arch/arm/mach-omap1/devices.c, branch docs-mw

ARM: omap1: Exorcise the legacy GPIO header

2023-05-24T13:01:53+00:00

After fixing all the offending users referencing the global GPIO numberspace in OMAP1, a few sites still remain including the legacy header for no reason. Delete the last remaining users, and OMAP1 is free from legacy GPIO dependencies. Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base") Signed-off-by: Linus Walleij

ARM: omap1: remove unused omapxxxx.h headers

2023-01-12T09:53:11+00:00

The only bit that is still in use is the OMAP_IH2_*_* macros, so move them into the existing hardware.h file. Signed-off-by: Arnd Bergmann

ARM: omap1: remove dead code

2023-01-12T09:53:11+00:00

After the removal of the unused board files, I went through the omap1 code to look for code that no longer has any callers and remove that. In particular, support for the omap7xx/omap8xx family is now completely unused, so I'm only leaving omap15xx/omap16xx/omap59xx. Cc: Aaro Koskinen Cc: Janusz Krzysztofik Cc: linux-omap@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Acked-by: Tony Lindgren Acked-by: Kevin Hilman Signed-off-by: Arnd Bergmann

ARM: omap1: move mach/*.h into mach directory

2022-04-22T09:08:55+00:00

Most of the header files are no longer referenced from outside arch/arm/mach-omap1, so move them all to that place directly and change their users to use the new location. The exceptions are: - mach/compress.h is used by the core architecture code - mach/serial.h is used by mach/compress.h The mach/memory.h is empty and gets removed in the process, avoiding the need for CONFIG_NEED_MACH_MEMORY_H. Acked-by: Tony Lindgren Signed-off-by: Arnd Bergmann

ARM: omap: un-merge plat/sram.c

2022-04-22T09:08:55+00:00

The sram initialization code is the only shared omap1/2 code that is not a standalone driver, but it is very short. Having two copies of this code means some duplication of the sources, but actually saves object code size as it can be inlined better. Acked-by: Tony Lindgren Signed-off-by: Arnd Bergmann

media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies

2020-07-04T10:18:49+00:00

The soc_camera driver is about to be removed, so drop camera support from this board. Note that the soc_camera driver itself has long since been deprecated and can't be compiled anymore (it depends on BROKEN), so camera support on this board has been broken for a long time (at least since 4.6 when the omap1_camera.c was removed from soc_camera). Signed-off-by: Hans Verkuil Cc: Tony Lindgren Acked-by: Arnd Bergmann Signed-off-by: Mauro Carvalho Chehab

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

ARM: OMAP1: devices: configure omap1_spi100k only on OMAP7xx

2018-11-29T20:07:14+00:00

Configure omap1_spi100k only on OMAP7xx. This allows running multiboard kernels on non-OMAP7xx HW with CONFIG_SPI_OMAP_100K enabled. Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren

ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module

2016-08-26T15:41:59+00:00

The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-01-21T02:10:05+00:00

Pull ARM SoC platform updates from Olof Johansson: "Updates for new platform support: - New platform: Tango4 from Sigma Designs. - Broadcom BCM2836 (Raspberry Pi 2 SoC) - Enable cpufreq on Freescale i.MX7D - Rockchip: SMP support for rk3036, general support for rk3228 - SMP support on Broadcom Kona and NSP - Cleanups for OMAP removing legacy IOMMU data + a bunch of misc fixes and tweaks for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) ARM: tango: Fix UP build issues ARM: tango: pass ARM arch level for smc.S ARM: bcm2835: Add Kconfig support for bcm2836 ARM: OMAP2+: Add support for dm814x and dra62x usb ARM: OMAP2+: Add mmc hwmod entries for dm814x ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx ARM: OMAP2+: Fix SoC detection for dra62x j5-eco ARM: tango4: Initial platform support ARM: bcm2835: Add a compat string for bcm2836 machine probe dt-bindings: Add root properties for Raspberry Pi 2 ARM: imx: select SRC for i.MX7 ARM: uniphier: select PINCTRL ARM: OMAP2+: Remove device creation for omap-pcm-audio ARM: OMAP1: Remove device creation for omap-pcm-audio ARM: rockchip: enable support for RK3228 SoCs ARM: rockchip: use const and __initconst for rk3036 smp_operations ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER ARM: BCM: Add SMP support for Broadcom 4708 ARM: BCM: Add SMP support for Broadcom NSP ARM: BCM: Clean up SMP support for Broadcom Kona ...