lwn.git/arch/arm/boot/dts/omap3-overo.dtsi, branch v6.8-rc5

ARM: dts: Move .dts files to vendor sub-directories

2023-06-21T17:39:50+00:00

The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar Acked-by: Michal Simek #Xilinx Acked-by: Krzysztof Kozlowski Acked-by: Neil Armstrong Acked-by: Paul Barker Acked-by: Tony Lindgren Acked-by: Gregory CLEMENT Acked-by: Heiko Stuebner Acked-by: Wei Xu #hisilicon Acked-by: Geert Uytterhoeven Acked-by: Nick Hawkins Acked-by: Baruch Siach Reviewed-by: Linus Walleij Reviewed-by: Andre Przywara Acked-by: Andre Przywara Reviewed-by: Claudiu Beznea Acked-by: Peter Rosin Acked-by: Jesper Nilsson Acked-by: Sudeep Holla Acked-by: Florian Fainelli #broadcom Acked-by: Manivannan Sadhasivam Reviewed-by: Jisheng Zhang Acked-by: Patrice Chotard Acked-by: Romain Perier Acked-by: Alexandre TORGUE Acked-by: Shawn Guo Acked-by: Kunihiko Hayashi Acked-by: Enric Balletbo i Serra Signed-off-by: Rob Herring

ARM: dts: Unify pinctrl-single pin group nodes for omap3

2023-05-23T07:59:19+00:00

We want to unify the pinctrl-single pin group nodes to use naming "pins". Otherwise non-standad pin group names will add make dtbs checks errors when the pinctrl-single yaml binding gets merged. Cc: Conor Dooley Cc: Krzysztof Kozlowski Cc: Rob Herring Signed-off-by: Tony Lindgren

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

ARM: dts: overo: Enable McBSP2 for all Overo COMs

2015-07-14T11:15:10+00:00

Both Gumstix Overo and Overo Storm COMs use TWL4030 audio module connected to the McBSP2. As such, enable the McBSP2 module in the common device tree file, omap3-overo-base.dtsi, rather than in the processor-specific device tree files, omap3-overo.dtsi and omap3-overo-storm.dtsi. This corrects audio on the Storm COMs where the setting was accidentally missing from the device tree. Signed-off-by: Ash Charles Signed-off-by: Tony Lindgren

Merge tag 'omap-for-v3.15/dt-overo-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

2014-03-17T14:17:07+00:00

Updates to the .dts files to support more Gumstix boards. These are sent separately from the rest of the .dts changes as these depend on the fixes merged into v3.14-rc4, and needed a bit more time to get updated on the fixes. * tag 'omap-for-v3.15/dt-overo-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Add support for the Overo Summit ARM: dts: Add support for the Overo Chestnut43 ARM: dts: Add support for the Overo Alto35 ARM: dts: Add support for the Overo Gallop43 ARM: dts: Add support for the Overo Palo43 ARM: dts: overo: Add LIS33DE accelerometer ARM: dts: overo: Create a file for common Gumstix peripherals ARM: dts: overo: Push uart3 pinmux down to expansion board ARM: dts: omap3-tobi: Add AT24C01 EEPROM ARM: dts: omap3-tobi: Use include file omap-gpmc-smsc9221 ARM: dts: omap: Add common file for SMSC9221 ARM: dts: omap3-overo: Add HSUSB PHY ARM: dts: omap3-overo: Enable WiFi/BT combo ARM: dts: omap3-overo: Add missing pinctrl ARM: dts: omap3-tobi: Add missing pinctrl ARM: dts: overo: reorganize include files Signed-off-by: Arnd Bergmann Conflicts: arch/arm/boot/dts/omap3-overo.dtsi

ARM: dts: omap3-overo: Add HSUSB PHY

2014-03-12T17:17:27+00:00

Add the High-Speed USB PHY. Signed-off-by: Florian Vaussard Acked-by: Roger Quadros Signed-off-by: Tony Lindgren

ARM: dts: omap3-overo: Enable WiFi/BT combo

2014-03-12T17:17:27+00:00

MMC2 is used by the on-board WiFi module populated on some boards (based on Marvell Libertas 8688 SDIO). The Bluetooth is connected to UART2. Signed-off-by: Florian Vaussard Signed-off-by: Tony Lindgren

ARM: dts: overo: reorganize include files

2014-03-12T17:17:25+00:00

Currently, overo-related include files are organized as follow: omap3-overo.dtsi | | omap34xx.dtsi omap3-overo-tobi-common.dtsi omap36xx.dtsi | | | | --------------- --------------- | | omap3-overo-tobi.dts omap3-overo-storm-tobi.dts This is unpractical when one has to deal with SoC-specific pinmux belonging to the omap3_pmx_core2 (defined in omap34xx/omap36xx), for pins related to the processor board. With the current hierarchy, such pinmux has to be defined in the expansion board's .dts, which is not logical. This patches reorganizes the files to add (yet another) abstraction layer between the processor and the expansion boards. omap34xx.dtsi omap3-overo-base.dtsi omap36xx.dtsi | | | | --------------- --------------- | | omap3-overo.dtsi omap3-overo-storm.dtsi | | -------- ------ | omap3-overo-tobi-common.dtsi | | | | | --------------- --------------- | | omap3-overo-tobi.dts omap3-overo-storm-tobi.dts Signed-off-by: Florian Vaussard Signed-off-by: Tony Lindgren

ARM: dts: omap3: Set disabled status for McBSP instances as default state

2014-02-28T23:03:59+00:00

In omap3.dtsi disable all mcbsp nodes and board dts files can explicitly enable the mcbsp they are using. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren

ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo

2014-02-13T23:31:43+00:00

Tobi expansion board can be used with both OMAP35xx-based Overo, and OMAP36xx-based Overo. Currently the boot is broken with newer OMAP36xx-based Overo (Storm and alike). Fix include file and compatible string to be able to boot newer models. This will break older models. This will be addressed later. Signed-off-by: Florian Vaussard Tested-by: Kevin Hilman Acked-by: Nishanth Menon Signed-off-by: Tony Lindgren