lwn.git/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi, branch docs-mw

ARM: dts: Move .dts files to vendor sub-directories

2023-06-21T17:39:50+00:00

The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar Acked-by: Michal Simek #Xilinx Acked-by: Krzysztof Kozlowski Acked-by: Neil Armstrong Acked-by: Paul Barker Acked-by: Tony Lindgren Acked-by: Gregory CLEMENT Acked-by: Heiko Stuebner Acked-by: Wei Xu #hisilicon Acked-by: Geert Uytterhoeven Acked-by: Nick Hawkins Acked-by: Baruch Siach Reviewed-by: Linus Walleij Reviewed-by: Andre Przywara Acked-by: Andre Przywara Reviewed-by: Claudiu Beznea Acked-by: Peter Rosin Acked-by: Jesper Nilsson Acked-by: Sudeep Holla Acked-by: Florian Fainelli #broadcom Acked-by: Manivannan Sadhasivam Reviewed-by: Jisheng Zhang Acked-by: Patrice Chotard Acked-by: Romain Perier Acked-by: Alexandre TORGUE Acked-by: Shawn Guo Acked-by: Kunihiko Hayashi Acked-by: Enric Balletbo i Serra Signed-off-by: Rob Herring

ARM: dts: Unify pinctrl-single pin group nodes for omap3

2023-05-23T07:59:19+00:00

We want to unify the pinctrl-single pin group nodes to use naming "pins". Otherwise non-standad pin group names will add make dtbs checks errors when the pinctrl-single yaml binding gets merged. Cc: Conor Dooley Cc: Krzysztof Kozlowski Cc: Rob Herring Signed-off-by: Tony Lindgren

ARM: dts: Unify pwm-omap-dmtimer node names

2022-11-22T12:15:09+00:00

There is no reg property for pwm-omap-dmtimer. Cc: Krzysztof Kozlowski Cc: Rob Herring Signed-off-by: Tony Lindgren

ARM: dts: Fix more boolean properties with values

2022-04-14T20:50:37+00:00

Boolean properties in DT are present or not present and don't take a value. A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't matter. It may have been intended that 0 values are false, but there is no change in behavior with this patch. Signed-off-by: Rob Herring Reviewed-by: Claudiu Beznea Reviewed-by: Bjorn Andersson Cc: Krzysztof Kozlowski Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Claudiu Beznea Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: "Benoît Cousson" Cc: Tony Lindgren Cc: Andy Gross Cc: Bjorn Andersson Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org Link: https://lore.kernel.org/r/20220407225107.2175958-1-robh@kernel.org' Signed-off-by: Arnd Bergmann

ARM: dts: logicpd-torpedo: Add isp1763 support to baseboard

2022-02-18T08:30:02+00:00

The baseboard has an ISP1763 USB controller acting as a host. Since the pinmuxing for the corresponding IRQ is different between OMAP35 and DM37, the pinmux has been placed in the kit-level files, while the common code is placed into the baseboard file. Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren

ARM: dts: omap: replace status value "ok" by "okay"

2020-09-10T09:46:51+00:00

While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler Signed-off-by: Tony Lindgren

ARM: dts: logicpd-torpedo-baseboard: Fix broken audio

2020-08-17T11:27:30+00:00

Older versions of U-Boot would pinmux the whole board, but as the bootloader got updated, it started to only pinmux the pins it needed, and expected Linux to configure what it needed. Unfortunately this caused an issue with the audio, because the mcbsp2 pins were configured in the device tree, they were never referenced by the driver. When U-Boot stopped muxing the audio pins, the audio died. This patch adds the references to the associate the pin controller with the mcbsp2 driver which makes audio operate again. Fixes: 739f85bba5ab ("ARM: dts: Move most of logicpd-torpedo-37xx-devkit to logicpd-torpedo-baseboard") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren

ARM: dts: Add 32KHz clock as default clock source

2020-05-05T17:56:42+00:00

Clocksource to timer configured in pwm mode can be selected using the DT property ti,clock-source. There are few pwm timers which are not selecting the clock source and relying on default value in hardware or selected by driver. Instead of relying on default value, always select the clock source from DT. Signed-off-by: Lokesh Vutla Reviewed-by: Suman Anna Signed-off-by: Tony Lindgren

ARM: dts: logicpd-torpedo: Remove unnecessary notes/comments

2019-11-14T16:57:52+00:00

There used to be a bug in the video driver that caused the timings for the LCD to calculate in a way on the DM3730 which made it hang. The work around for this bug was to set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 in the kernel. This work around is no longer needed as the video drivers have been corrected. This patch removes the legacy note. Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren

ARM: dts: logicpd-torpedo-baseboard: Enable HDQ

2019-11-14T16:56:42+00:00

The baseboard of the Logic PD Torpedo development kit has a socket for a rechargable battery. The battery is monitored by a charger which can communicate of the the 1-wire HDQ pin. This patch enables the pinmux for the HDQ pin. Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren