linux.git/kernel/time, branch master

Merge tag 's390-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2026-08-23T17:26:44+00:00

Pull s390 updates from Vasily Gorbik: - Add a cpuidle driver with polling and enabled wait states using the existing CPU idle infrastructure and idle governor to improve latency for frequent sleep/wakeup cycles. Remove the obsolete tick delay heuristic and generic arch_needs_cpu() hook. Add the corresponding driver entry to MAINTAINERS - Add kCFI support using the generic support provided by Clang - Enable Clang CONTEXT_ANALYSIS for various architecture code and for char, PCI, CIO and virtio drivers. Add required lock annotations, exclude unsupported mm helpers and remove conditional PCI locking - Fix secure storage access exception handling and reintroduce DCACHE_WORD_ACCESS previously removed as a workaround - Fix cpum_cf perf crashes when CPUs are brought online while per-task events are active. Allocate and remove per-CPU counter data from CPU hotplug callbacks - Fix a deadlock when an s390dbf debug area is unregistered while one of its debugfs files is being written to - Fix MVIY_PERCPU() with binutils older than 2.39, where an assembler macro silently omitted an instruction needed to repair interrupted operations after CPU migration - Remove/replace cond_resched() calls which are no-ops with the supported s390 preemption models - Fix AP queue depth and maximum message length decoding according to the architecture. Current hardware is not affected, but future hardware could report values which were handled incorrectly - Reflect the configured CPU state in cpu_enabled_mask so deconfigured CPUs are not presented as available for onlining - Restore the vDSO GNU_EH_FRAME program header which was lost when the build switched to direct linker invocation, and mark it read-only - Add SCLP action qualifiers used by Spyre for card initialization, recoverable error and telemetry reporting - Move KMSAN interrupt flag helpers out of line to fix -Wstatic-in-inline build warnings - Use level-specific page table entry accessors for hugetlb entries and ptep_get() when accessing crashed kernel memory in kdump - Make forced AP bus rescans killable so that a user process blocked behind an ongoing scan can still be terminated with SIGKILL - Rework pkey ioctl error paths to remove duplicated cleanup code and avoid freeing error pointers - Allow the protected guest SWIOTLB buffer to be allocated outside the first 2GB. Also enable dynamic SWIOTLB growth and the coherent atomic pool fallback to improve I/O behavior when the initial pool is exhausted - Add program check statistics and spinlock contention tracepoints. Increase the lockdep chain capacity to keep lockdep enabled for complex code paths such as btrfs - Simplify IPL, trap and syscall code and remove the obsolete unistd_32.h generation entry * tag 's390-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (59 commits) s390/percpu: Fix MVIY_PERCPU() with older binutils s390/debug: Fix deadlock during unregister s390/cpum_cf: Handle CPU hotplug via prepare/dead callbacks s390: Enable CONTEXT_ANALYSIS for various directories s390/mm: Add __context_unsafe() attribute to gmap helper functions s390/mm: Add __context_unsafe() attribute to do_secure_storage_access() s390/sysinfo: Add context analysis attributes s390/irqflags: Add out-of-line definitions of arch_local_irq_*() for KMSAN s390/virtio: Enable CONTEXT_ANALYSIS s390/cio: Enable CONTEXT_ANALYSIS s390/vfio_ccw: Add __must_hold() attribute to vfio_ccw_sch_quiesce() s390/pci: Enable CONTEXT_ANALYSIS s390/pci: Rework __zpci_event_availability() to remove conditional locking s390/pci: Rework __zpci_event_error() to remove conditional locking s390/char: Enable CONTEXT_ANALYSIS s390/con3215: Add __must_hold() attribute to raw3215_make_room() s390/ap: Fix MAPML computation s390/cio: Remove cond_resched() calls s390: Remove cond_resched() calls KVM: s390: Remove cond_resched() calls ...

Merge tags 'core-urgent-2026-08-22' and 'timers-urgent-2026-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2026-08-22T23:11:56+00:00

Pull timer fixes from Ingo Molnar: - Fix timer debugobjects state corruption on CPU offlining (Thomas Gleixner) - Fix ARM get_cycles() regression causing boot hangs on certain ARM configs (Nathan Chancellor) * tag 'core-urgent-2026-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timer: Keep debugobjects state consistent in migrate_timer_list() * tag 'timers-urgent-2026-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ARM: Fix get_cycles() after delay_read_timer() conversion

Merge tag 'sysctl-7.03-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl

2026-08-20T15:46:41+00:00

Pull sysctl updates from Joel Granados: - Fix kernel-doc warnings by adjusting in file documentation - Consolidate do_proc_* function into do_proc_vec Consolidate three slightly different implementations of applying a converter on all elements of a vector. Fixes to this function now propagate to the three types. - Replace CONFIG_PROC_SYSCTL with CONFIG_SYSCTL (they were the same) and restrict cad_pid modifications to global root (GLOBAL_ROOT_UID) * tag 'sysctl-7.03-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: sysctl: remove CONFIG_PROC_SYSCTL, it just mirrors CONFIG_SYSCTL sysctl: move the "cad_pid" entry from pid_table[] to kern_reboot_table[] sysctl: repair some kernel-doc comments sysctl: add Returns: kernel-doc for all functions sysctl: Update API function documentation sysctl: Rename proc_doulongvec_minmax_conv to proc_doulongvec_conv sysctl: Group proc_handler declarations and document sysctl: Replace do_proc_do{int,ulong,uint}vec with do_proc_vec sysctl: Add negp parameter to douintvec converter functions sysctl: Move default converter assignment out of do_proc_dointvec

Merge tag 'timers-vdso-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2026-08-18T23:56:25+00:00

Pull VDSO updates from Thomas Gleixner: - Consolidate the VDSO datastore further and provide support for mlock_all() and prefaulting. - Provide 32-bit legacy time related functionality only if CONFIG_COMPAT_32BIT_TIME is enabled. The config switch exists, but architecture code still exposes the legacy functionality even disabled. Clean this up by adding the missing guards and validating at build time that the VDSO is legacy free if disabled. - Consolidate the VDSO related config options in core and drivers, which removes some non-sensical dependencies and quite an amount of #ifdeffery. - Clean up the PAGE_SIZE definition maze * tag 'timers-vdso-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) random: vDSO: Drop custom PAGE_SIZE definitions LoongArch: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery clocksource/drivers/timer-riscv: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery clocksource/drivers/arm_arch_timer: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery clocksource/drivers/mips-gic-timer: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery MIPS: csrc-r4k: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery vDSO: Make clockmode constants available without CONFIG_GENERIC_GETTIMEOFDAY kbuild: Support generated asm-headers in subdirectories vdso: Rename HAVE_GENERIC_VDSO to VDSO_DATASTORE vdso: Drop HAVE_GENERIC_VDSO from architecture kconfig files vdso: Automatically select HAVE_GENERIC_VDSO if necessary MIPS: vdso: Stop using CONFIG_HAVE_GENERIC_VDSO vdso: Remove the dependency on HAVE_GENERIC_VDSO from ARCH_HAS_VDSO_ARCH_DATA futex: Remove dependency on HAVE_GENERIC_VDSO from FUTEX_ROBUST_UNLOCK vdso/gettimeofday: Verify COMPAT_32BIT_TIME interactions sparc: vdso: Respect COMPAT_32BIT_TIME MIPS: VDSO: Respect COMPAT_32BIT_TIME powerpc/vdso: Respect COMPAT_32BIT_TIME ARM: VDSO: Respect COMPAT_32BIT_TIME arm64: vdso32: Respect COMPAT_32BIT_TIME ...

Merge tag 'timers-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2026-08-18T23:23:56+00:00

Pull timer and timekeeping core updates from Thomas Gleixner: - Fix a subtly inconsistency in the timekeeping code, which fails to account for the monotonicity adjustment in ntp_error. For small changes of the clocksource multiplicator (+/-1) which are typically used by the NTP PLL this is hard to observe. But for larger adjustments, e.g. caused by a direct frequency setting through adjtimex() the one-time uncompensated offset is significant. Cure this by adjusting ntp_error with the resulting offset so that the discrepancy is smoothed away over time - Make tick length calculations correct in NTP. The timekeeping core takes the quantisation of the clocksource into account when calculating the tick length to compensate for the deviation of the nominal NTP_INTERVAL_LENGTH. While timekeeping gets this right, NTP is not aware of that, which means it operates on the nominal value and not on the actual value which is determined by the clock source frequency. The rounding of a coarse clocksource like the ACPI PM timer results in a +127 PPM deviation. Cure this by exposing the deviation to the NTP code so that it can operate on the same data as the timekeeping core. This is purely kernel internal. User space still sees the nominal tick lenght via adjtimex(). - The accuracy of the NTP adjustments is fairly approximate as the code assumes that the invocations are precisely in NTP interval frequency ticks and the final adjustment can over and under-run. Cure this by adjusting ntp_error by the intended skew on each tick to achieve the desired rate. - Handle the two competing skews of time offset and time adjustment correctly by calculating the conflict portion between the skews and adjusting both accordingly. - A set of updates and improvements for the selftests - The usual small fixes and improvements all over the place * tag 'timers-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) selftests: timers: nsleep-lat: Check all calls to clock_nanosleep() and clock_gettime() selftests: timers: nsleep-lat: Reuse kselftest error numbers selftests: timers: nsleep-lat: Explicitly list the tested clocks selftests: timers: nsleep-lat: Use NSEC_PER_MSEC define for unreasonable latency selftests: timers: nanosleep: Report each test separately selftests: timers: nanosleep: Explicitly handle timer_delete() failure selftests: timers: nanosleep: Move all single clock tests out of the loop in main() selftests: timers: nanosleep: Reuse kselftest error numbers selftests: timers: nanosleep: Explicitly list the tested clocks selftests: timers: nanosleep: Drop output alignment selftests: timers: Use clock_name() and constants from clock-helpers.h selftests: Add clock-helpers.h timer_list: Use ktime_t over nanoseconds timer_list: Use standard 'long long' format placeholders hrtimer: Add a lockdep assertion to hrtimer_update_base() timekeeping: Use u32 for clock_was_set_seq timekeeping: Rename clockid_aux_valid() to clockid_is_aux_clock() hrtimer: Account nr_retries on recovered interrupt retries timers/itimer: Zero-init old itimerval before copy to userspace nohz: Replace dead select with choice default ...

timer: Keep debugobjects state consistent in migrate_timer_list()

2026-08-18T08:51:43+00:00

When timers are migrated away from an offline CPU the debugobjects state gets corrupted. The timer is accounted as inactive on deletion, but the enqueue on the alive CPU lacks the activation call. That used to work, but got broken when the trace point and the debug objects call got separated. That change missed to fixup migrate_timer_list(). Add the missing debug_timer_activate() invocation to fix it. Fixes: dc1e7dc5ac62 ("timer: Move trace point to get proper index") Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://patch.msgid.link/87bjb0l7ha.ffs@fw13

timer_list: Use ktime_t over nanoseconds

2026-08-11T16:11:20+00:00

hrtimers use ktime_t in their implementation and API. The timer list performs a lot of unnecessary conversion to nanoseconds which make the code harder to read and are also wrong in case the values ever become negative. Remove the conversions. Signed-off-by: Thomas Weißschuh (Schneider Electric) Signed-off-by: Thomas Gleixner Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-5-910cbd485390@linutronix.de

timer_list: Use standard 'long long' format placeholders

2026-08-11T16:11:20+00:00

'%Ld' and '%Lu' are GNU extensions. While they do work for kernel code, checkpatch complains about them all the time. Replace them with the standard placeholders for 'long long' types, namely '%lld' and '%llu'. Signed-off-by: Thomas Weißschuh (Schneider Electric) Signed-off-by: Thomas Gleixner Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-4-910cbd485390@linutronix.de

hrtimer: Add a lockdep assertion to hrtimer_update_base()

2026-08-11T16:11:20+00:00

Document and verify that the hrtimer_cpu_base::lock is held at this point. Signed-off-by: Thomas Weißschuh (Schneider Electric) Signed-off-by: Thomas Gleixner Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-3-910cbd485390@linutronix.de

timekeeping: Use u32 for clock_was_set_seq

2026-08-11T16:11:20+00:00

Use an explicitly sized type to make the code a bit more consistent with other fields of the datastructure and other sequence counters. Signed-off-by: Thomas Weißschuh (Schneider Electric) Signed-off-by: Thomas Gleixner Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-2-910cbd485390@linutronix.de