linux-next.git/include/linux/spi, branch akpm-base

spi: Fix per-cpu stats access on 32 bit systems

2022-06-10T12:33:17+00:00

On 32 bit systems, the following kernel BUG is hit: BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 caller is debug_smp_processor_id+0x18/0x24 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc1-00001-g6ae0aec8a366 #181 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: dump_backtrace from show_stack+0x20/0x24 r7:81024ffd r6:00000000 r5:81024ffd r4:60000013 show_stack from dump_stack_lvl+0x60/0x78 dump_stack_lvl from dump_stack+0x14/0x1c r7:81024ffd r6:80f652de r5:80bec180 r4:819a2500 dump_stack from check_preemption_disabled+0xc8/0xf0 check_preemption_disabled from debug_smp_processor_id+0x18/0x24 r8:8119b7e0 r7:81205534 r6:819f5c00 r5:819f4c00 r4:c083d724 debug_smp_processor_id from __spi_sync+0x78/0x220 __spi_sync from spi_sync+0x34/0x4c r10:bb7bf4e0 r9:c083d724 r8:00000007 r7:81a068c0 r6:822a83c0 r5:c083d724 r4:819f4c00 spi_sync from spi_mem_exec_op+0x338/0x370 r5:000000b4 r4:c083d910 spi_mem_exec_op from spi_nor_read_id+0x98/0xdc r10:bb7bf4e0 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:82358040 r4:819f7c40 spi_nor_read_id from spi_nor_detect+0x38/0x114 r7:82358040 r6:00000000 r5:819f7c40 r4:819f7c40 spi_nor_detect from spi_nor_scan+0x11c/0xbec r10:bb7bf4e0 r9:00000000 r8:00000000 r7:c083da4c r6:00000000 r5:00010101 r4:819f7c40 spi_nor_scan from spi_nor_probe+0x10c/0x2d0 r10:bb7bf4e0 r9:bb7bf4d0 r8:00000000 r7:819f4c00 r6:00000000 r5:00000000 r4:819f7c40 per-cpu access needs to be guarded against preemption. Fixes: 6598b91b5ac3 ("spi: spi.c: Convert statistics to per-cpu u64_stats_t") Reported-by: Marc Kleine-Budde Signed-off-by: David Jander Tested-by: Nícolas F. R. A. Prado Link: https://lore.kernel.org/r/20220609121334.2984808-1-david@protonic.nl Signed-off-by: Mark Brown

spi: : Add missing documentation for struct members

2022-06-08T16:45:42+00:00

Fixes these "make htmldocs" warnings: include/linux/spi/spi.h:82: warning: Function parameter or member 'syncp' not described in 'spi_statistics' include/linux/spi/spi.h:213: warning: Function parameter or member 'pcpu_statistics' not described in 'spi_device' include/linux/spi/spi.h:676: warning: Function parameter or member 'pcpu_statistics' not described in 'spi_controller' Fixes: 6598b91b5ac3 ("spi: spi.c: Convert statistics to per-cpu u64_stats_t") Reported-by: Stephen Rothwell Signed-off-by: David Jander Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220608153309.2899565-1-david@protonic.nl Signed-off-by: Mark Brown

spi: spi.c: Convert statistics to per-cpu u64_stats_t

2022-06-06T11:41:31+00:00

This change gives a dramatic performance improvement in the hot path, since many costly spin_lock_irqsave() calls can be avoided. On an i.MX8MM system with a MCP2518FD CAN controller connected via SPI, the time the driver takes to handle interrupts, or in other words the time the IRQ line of the CAN controller stays low is mainly dominated by the time it takes to do 3 relatively short sync SPI transfers. The effect of this patch is a reduction of this time from 136us down to only 98us. Suggested-by: Andrew Lunn Signed-off-by: David Jander Link: https://lore.kernel.org/r/20220524091808.2269898-1-david@protonic.nl Signed-off-by: Mark Brown

spi: fix typo in comment

2022-06-06T11:41:26+00:00

Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall Link: https://lore.kernel.org/r/20220521111145.81697-13-Julia.Lawall@inria.fr Signed-off-by: Mark Brown

Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2022-06-03T18:48:47+00:00

Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.19-rc1. Lots of tiny driver core changes and cleanups happened this cycle, but the two major things are: - firmware_loader reorganization and additions including the ability to have XZ compressed firmware images and the ability for userspace to initiate the firmware load when it needs to, instead of being always initiated by the kernel. FPGA devices specifically want this ability to have their firmware changed over the lifetime of the system boot, and this allows them to work without having to come up with yet-another-custom-uapi interface for loading firmware for them. - physical location support added to sysfs so that devices that know this information, can tell userspace where they are located in a common way. Some ACPI devices already support this today, and more bus types should support this in the future. Smaller changes include: - driver_override api cleanups and fixes - error path cleanups and fixes - get_abi script fixes - deferred probe timeout changes. It's that last change that I'm the most worried about. It has been reported to cause boot problems for a number of systems, and I have a tested patch series that resolves this issue. But I didn't get it merged into my tree before 5.18-final came out, so it has not gotten any linux-next testing. I'll send the fixup patches (there are 2) as a follow-on series to this pull request. All have been tested in linux-next for weeks, with no reported issues other than the above-mentioned boot time-outs" * tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) driver core: fix deadlock in __device_attach kernfs: Separate kernfs_pr_cont_buf and rename_lock. topology: Remove unused cpu_cluster_mask() driver core: Extend deferred probe timeout on driver registration MAINTAINERS: add Russ Weight as a firmware loader maintainer driver: base: fix UAF when driver_attach failed test_firmware: fix end of loop test in upload_read_show() driver core: location: Add "back" as a possible output for panel driver core: location: Free struct acpi_pld_info *pld driver core: Add "*" wildcard support to driver_async_probe cmdline param driver core: location: Check for allocations failure arch_topology: Trace the update thermal pressure kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file. export: fix string handling of namespace in EXPORT_SYMBOL_NS rpmsg: use local 'dev' variable rpmsg: Fix calling device_lock() on non-initialized device firmware_loader: describe 'module' parameter of firmware_upload_register() firmware_loader: Move definitions from sysfs_upload.h to sysfs.h firmware_loader: Fix configs for sysfs split selftests: firmware: Add firmware upload selftests ...

spi: Doc fix - Describe add_lock and dma_map_dev in spi_controller

2022-05-12T14:43:04+00:00

This fixes the corresponding warnings during building the docs. Signed-off-by: Siddh Raman Pant Link: https://lore.kernel.org/r/4e6187a4-d0f8-4750-e407-e09cc1c91789@gmail.com Signed-off-by: Mark Brown

spi: Use helper for safer setting of driver_override

2022-04-22T15:13:54+00:00

Use a helper to set driver_override to the reduce amount of duplicated code. Reviewed-by: Mark Brown Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220419113435.246203-8-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman

Merge tag 'mtd/changes-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

2022-03-25T20:35:34+00:00

Pull MTD updates from Miquel Raynal: "There has been a lot of activity in the MTD subsystem recently, with a number of SPI-NOR cleanups as well as the introduction of ECC engines that can be used by SPI controllers (hence a few SPI patches in here). Core MTD changes: - Replace the expert mode symbols with a single helper - Fix misuses of of_match_ptr() - Remove partid and partname debugfs files - tests: Fix eraseblock read speed miscalculation for lower partition sizes - TRX parser: Allow to use on MediaTek MIPS SoCs MTD driver changes: - spear_smi: use GFP_KERNEL - mchp48l640: Add SPI ID table - mchp23k256: Add SPI ID table - blkdevs: Avoid soft lockups with some mtd/spi devices - aspeed-smc: Improve probe resilience Hyperbus changes: - HBMC_AM654 should depend on ARCH_K3 NAND core changes: - ECC: - Add infrastructure to support hardware engines - Add a new helper to retrieve the ECC context - Provide a helper to retrieve a pilelined engine device NAND-ECC changes: - Macronix ECC engine: - Add Macronix external ECC engine support - Support SPI pipelined mode - Make two read-only arrays static const - Fix compile test issue Raw NAND core changes: - Fix misuses of of_match_node() - Rework of_get_nand_bus_width() - Remove of_get_nand_on_flash_bbt() wrapper - Protect access to rawnand devices while in suspend - bindings: Document the wp-gpios property Rax NAND controller driver changes: - atmel: Fix refcount issue in atmel_nand_controller_init - nandsim: - Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern - Merge repeat codes in ns_switch_state - Replace overflow check with kzalloc to single kcalloc - rockchip: Fix platform_get_irq.cocci warning - stm32_fmc2: Add NAND Write Protect support - pl353: Set the nand chip node as the flash node - brcmnand: Fix sparse warnings in bcma_nand - omap_elm: Remove redundant variable 'errors' - gpmi: - Support fast edo timings for mx28 - Validate controller clock rate - Fix controller timings setting - brcmnand: - Add BCMA shim - BCMA controller uses command shift of 0 - Allow platform data instantation - Add platform data structure for BCMA - Allow working without interrupts - Move OF operations out of brcmnand_init_cs() - Avoid pdev in brcmnand_init_cs() - Allow SoC to provide I/O operations - Assign soc as early as possible Onenand changes: - Check for error irq SPI-NAND core changes: - Delay a little bit the dirmap creation - Create direct mapping descriptors for ECC operations SPI-NAND driver changes: - macronix: Use random program load SPI NOR core changes: - Move vendor specific code out of the core into vendor drivers. - Unify all function and object names in the vendor modules. - Make setup() callback optional to improve readability. - Skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash declaration. SPI changes: - Macronix SPI controller: - Fix the transmit path - Create a helper to configure the controller before an operation - Create a helper to ease the start of an operation - Add support for direct mapping - Add support for pipelined ECC operations - spi-mem: - Introduce a capability structure - Check the controller extra capabilities - cadence-quadspi/mxic: Provide capability structures - Kill the spi_mem_dtr_supports_op() helper - Add an ecc parameter to the spi_mem_op structure Binding changes: - Dropped mtd/cortina,gemini-flash.txt - Convert BCM47xx partitions to json-schema - Vendor prefixes: Clarify Macronix prefix - SPI NAND: Convert spi-nand description file to yaml - Raw NAND chip: Create a NAND chip description - Raw NAND controller: - Harmonize the property types - Fix a comment in the examples - Fix the reg property description - Describe Macronix NAND ECC engine - Macronix SPI controller: - Document the nand-ecc-engine property - Convert to yaml - The interrupt property is not mandatory" * tag 'mtd/changes-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (104 commits) mtd: nand: ecc: mxic: Fix compile test issue mtd: nand: mxic-ecc: make two read-only arrays static const mtd: hyperbus: HBMC_AM654 should depend on ARCH_K3 mtd: core: Remove partid and partname debugfs files dt-bindings: mtd: partitions: convert BCM47xx to the json-schema mtd: tests: Fix eraseblock read speed miscalculation for lower partition sizes mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init mtd: rawnand: rockchip: fix platform_get_irq.cocci warning mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set mtd: spi-nor: renumber flags mtd: spi-nor: slightly change code style in spi_nor_sr_ready() mtd: spi-nor: spansion: rename vendor specific functions and defines mtd: spi-nor: spansion: convert USE_CLSR to a manufacturer flag mtd: spi-nor: move all spansion specifics into spansion.c mtd: spi-nor: spansion: slightly rework control flow in late_init() mtd: spi-nor: micron-st: rename vendor specific functions and defines mtd: spi-nor: micron-st: convert USE_FSR to a manufacturer flag mtd: spi-nor: move all micron-st specifics into micron-st.c mtd: spi-nor: xilinx: correct the debug message mtd: spi-nor: xilinx: rename vendor specific functions and defines ...

spi: use specific last_cs instead of last_cs_enable

2022-02-28T13:36:16+00:00

Commit d40f0b6f2e21 instroduced last_cs_enable to avoid setting chipselect if it's not necessary, but it also introduces a bug. The chipselect may not be set correctly on multi-device SPI busses. The reason is that we can't judge the chipselect by bool last_cs_enable, since chipselect may be modified after other devices were accessed. So we should record the specific state of chipselect in case of confusion. Signed-off-by: Yun Zhou Link: https://lore.kernel.org/r/20220217141234.72737-1-yun.zhou@windriver.com Signed-off-by: Mark Brown

spi: Retire legacy GPIO handling

2022-02-14T12:53:18+00:00

All drivers using GPIOs as chip select have been rewritten to use GPIO descriptors passing the ->use_gpio_descriptors flag. Retire the code and fields used by the legacy GPIO API. Do not drop the ->use_gpio_descriptors flag: it now only indicates that we want to use GPIOs in addition to native chip selects. Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20220210231954.807904-1-linus.walleij@linaro.org Signed-off-by: Mark Brown