linux-next.git/drivers/net/ethernet/pensando/ionic/ionic_stats.c, branch master

ionic: Report "rx_bits_phy" stat to ethtool

2026-06-16T01:15:08+00:00

This stat contains the number of total bits that the PHY has received; it's useful for BER calculations. Add it to the ethtool stats output. However, since this is one of the new "extra port stats", it's reported in a different manner than the existing port stats and only conditionally added to the ethtool stats output list: both the DEV_CAP_EXTRA_STATS capability must be supported by the firmware, and the firmware must set the value of the statistic to something other than IONIC_STAT_INVALID. To help support this scheme, the extra port stats region is initialized to 0xff's/IONIC_STAT_INVALID by the driver, to ensure the statistics that the driver knows about but the firmware does not are still invalid to the driver. Signed-off-by: Eric Joyner Link: https://patch.msgid.link/20260614205303.48088-4-eric.joyner@amd.com Signed-off-by: Jakub Kicinski

ionic: Add XDP_REDIRECT support

2024-02-16T08:48:08+00:00

The XDP_REDIRECT packets are given to the XDP stack and we drop the use of the related page: it will get freed by the driver that ends up doing the Tx. Because we have some hardware configurations with limited queue resources, we use the existing datapath Tx queues rather than creating and managing a separate set of xdp_tx queues. Co-developed-by: Brett Creeley Signed-off-by: Brett Creeley Signed-off-by: Shannon Nelson Reviewed-by: Jacob Keller Signed-off-by: David S. Miller

ionic: Add XDP_TX support

2024-02-16T08:48:08+00:00

The XDP_TX packets get fed back into the Rx queue's partnered Tx queue as an xdp_frame. Co-developed-by: Brett Creeley Signed-off-by: Brett Creeley Signed-off-by: Shannon Nelson Reviewed-by: Jacob Keller Signed-off-by: David S. Miller

ionic: add initial framework for XDP support

2024-02-16T08:48:08+00:00

Set up the basics for running Rx packets through XDP programs. Add new queue setup and teardown steps for adding/removing an XDP program, and add the call to run the XDP on a packet. The XDP frame size needs to be the MTU plus standard ethernet header, plus head room for XDP scribblings and tail room for a struct skb_shared_info. Also, at this point, we don't support XDP frags, only a single contiguous Rx buffer. This means that our page splitting is not very useful, so when XDP is in use we need to use the full Rx buffer size and not do sharing. Co-developed-by: Brett Creeley Signed-off-by: Brett Creeley Signed-off-by: Shannon Nelson Reviewed-by: Jacob Keller Signed-off-by: David S. Miller

net: Convert some ethtool_sprintf() to ethtool_puts()

2023-12-08T10:56:25+00:00

This patch converts some basic cases of ethtool_sprintf() to ethtool_puts(). The conversions are used in cases where ethtool_sprintf() was being used with just two arguments: | ethtool_sprintf(&data, buffer[i].name); or when it's used with format string: "%s" | ethtool_sprintf(&data, "%s", buffer[i].name); which both now become: | ethtool_puts(&data, buffer[i].name); Signed-off-by: Justin Stitt Reviewed-by: Wei Fang Reviewed-by: Andrew Lunn Reviewed-by: Louis Peens Signed-off-by: David S. Miller

ionic: clean up comments and whitespace

2022-02-19T04:37:14+00:00

Fix up some checkpatch complaints that have crept in: doubled words words, mispellled words, doubled lines. Signed-off-by: Shannon Nelson Signed-off-by: Jakub Kicinski

ionic: remove debug stats

2021-10-02T13:00:21+00:00

These debug stats are not really useful, their collection is likely detrimental to performance, and they suck up a lot of memory which never gets used if no one ever enables the priv-flag to print them, so just remove these bits. Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller

ionic: fix gathering of debug stats

2021-09-28T12:19:57+00:00

Don't print stats for which we haven't reserved space as it can cause nasty memory bashing and related bad behaviors. Fixes: aa620993b1e5 ("ionic: pull per-q stats work out of queue loops") Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller

ionic: ethtool ptp stats

2021-04-02T21:18:33+00:00

Add the new hwstamp stats to our ethtool stats output. Signed-off-by: Allen Hubbe Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller

ionic: pull per-q stats work out of queue loops

2021-03-31T00:37:13+00:00

Abstract out the per-queue data collection work into separate functions from the per-queue loops in the stats reporting, similar to what Alex did for the data label strings in commit acebe5b6107c ("ionic: Update driver to use ethtool_sprintf") Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller